SCREAMING Bearings! (Full Teardown) Ford F-150 4.6 5.4

Подписаться 570 тыс.

Просмотров 91 тыс.

50% 1

Check out our Ray's Auto Clinic Merch HERE: EVERYTHING is a HAMMER! www.RainmanRaysRepairs.com
Support the Channel with a Like and Subscribe!
Become a Channel Member here on RU-vid or visit Patreon at / rainmanraysrepairs to donate and support the channel!
Visit our Second Channel on RU-vid, RainmanRay Off Duty / rainmanrayoutoftheshop
Take a look at my Affiliated Brands and Product Recommendations below:
Interested in Banks Power Performance Products? Visit Banks Power HERE!
**** www.bankspower.com/RAY *********
Take care of your car or truck with premium synthetic Amsoil Engine Oil and fluids!
Do you perform your own maintenance? Get premium synthetic Amsoil products HERE! ************************ www.amsoil.com/?zo=30606222 *************************
When it comes to Synthetics, Amsoil is the best in the business! Amsoil backs up their claim with numerous performance testing methods and results can be found at www.amsoil.com/?zo=30606222
Visit www.RainmanRaysRepairs.com To have your vehicle serviced at Ray's Auto Clinic in Bradenton Florida where we proudly use Amsoil premium synthetics and other top tier automotive products!
Tool Picks! Zero Drive magnetic Drive Ratchet: Visit www.getzerodrive.com/
Found on Amazon:
Mountain 5-Piece Metric Double Box Universal Spline Reversible Ratcheting Wrench Set; 8 mm - 18mm, 90 Tooth Design, Long, Flexible, Reversible; MTNRM6 amzn.to/3OJTRp2
As an Amazon Associate I earn from qualifying purchases.
Also, I personally use or have used the products featured in my links and only recommended them if I feel they are of good quality.
#mechanic #repair #autorepair #restoration #wifeunit #brakecleanmafia
ABOUT OUR CHANNEL
Our channel is about general automotive repair and maintenance . We cover a large variety of automotive services and repairs in a privately owned independent shop.
Check out our channel here:
/ @rainmanraysrepairs
and the Off Duty Channel here: RainmanRay Off Duty / rainmanrayoutoftheshop
Don’t forget to subscribe and share!

Авто/Мото

Опубликовано:

27 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 483

@tomdixon1213 3 дня назад

Dave’s rapid response to your request is phenomenal. What an assistant! You are blessed to have Dave.

@Gizmo42Rodeo 2 дня назад

What a difference a Dave makes. I'm also a Dave

@jimmymcclendon6210 День назад

Sounds exactly something Dave would say.....

@ChromaKeyMystress 3 дня назад

I've been laughing and giggling since the noise started. HOLY COW!!!!

@moonflow23 3 дня назад

3 minutes in, and my jaw is on the floor....I've never heard a bearing that loud in my life, and I live in St. Louis, where car maintenance is fix it when something falls off.

@ken2tou 2 дня назад

Yup. Sounds like the bearings are made of sandpaper. 😅

@justin.gollnick 2 дня назад

im wondering if somehow the noise rapidly got to that point, of if the owner is REALLY good at drowning out expensive sounds haha

@stanbrown5425 2 дня назад

270 junkyard specials

@johnt.848 2 дня назад

Ray bravely drove it further down the road than I would have dared.

@realcdcruze3558 3 дня назад

That familiar bearing helicopter sound.

@bearing_aficionado 3 дня назад

Oh hell yeah! As The official bearing aficionado of this channel, I wholeheartedly endorse bearing videos!

@yesyes541 3 дня назад

Grin and Bearing it

@jerryc3050 2 дня назад

I saw what you did.

@golf25radioman 3 дня назад

Your theory of someone putting incorrect preload/tightness on the pinion may be it. I thought there was way too much backlash, which could be related to that. A full bearing overhaul, and limited slip too if the owner approves may be the ticket. I look forward to the followup video. Thanks for another great video. 😊

@scottreed991 2 дня назад

Exactly my thoughts. Preload on crush washer. Pinion bearing too loose. Peace.

@1crustyoldmsgtretired870 3 дня назад

OOF that one is a growler! I think what happened was someone replaced the pinion seal and smoked the nut on without thinking about the preload on the pinion bearings.

@Ronskutin 3 дня назад

Thumb up for Dave! He is excelent mechanic like Ray, hard working and always happy. He is keeper for sure. I salute you, sir!

@rickydonahue1586 3 дня назад

Like Sleeper Dude says you always want to check your rear end because no one else is going to do it for you!👍

@ryancase8744 2 дня назад

anyone else watching the truck in drive on the lift going down secretly think "what if the lift failed and the truck went sailing through the back of the shop" that would make the highlight reel for sure. Love the knowledge and commentary from Ray!

@tomtke7351 2 дня назад

I kinda agree that this test is best accomplished with another in the driver's seat.

@MarkEdmond-gw9lz 2 дня назад

@garyh7949 21 час назад

That thought did cross my mind.

@abitoffcenter383 3 дня назад

Yeah, I have an f150 and it sounded very similar to what that one did. I took it apart and things didn't look to bad. But I could tell that at some point the pinion nut had been over tightened. You could really see it on the races. I think they were trying to compensate for an incorrect spacing between the pinion and ring gears. Since I was unsure about what all had been done to it. I just rebuilt the whole thing. I've had no worries since then. Although every once in a while I'll hear a high pitch clicking. Sounds like a U-joint to me. But the odd thing is that it just comes and goes. I can't seem to find a reoccurring situation that would making it happen. It's just completely random and goes away as quickly as it shows up. But, it is a Ford. Fix Or Repair Daily 😕🤦‍♂

@robertsturtevant6185 3 дня назад

Rather fix or repair daily, before I’m found on road dead…..😂😂

@tomtke7351 2 дня назад

FORD has been around a long long time... so never forget: First On Race Day.

@stevemccauley5734 2 дня назад

@@tomtke7351first on race day. Last to the finish line lol. F****ing old rebuilt dodge.

@ElitePraetorianGuard 15 часов назад

@@tomtke7351 First On Race Day.... More like Fucked On Race Day! Just kidding, I have no hate for Fords.

@robertsturtevant6185 3 дня назад

Okay, for a Friday I laughed too hard at the glove being put on….. 😂😂😂😂

@Michael-yi4mc 2 дня назад

Ray spinning the axle with a drill is every mechanic’s second childhood dream. Including myself!

@shadetreemech290 2 дня назад

Yeah, I liked that too.

@lookin424 3 дня назад

I have driveshaft banging with slop between forward and reverse shifts that I've isolated to the rear end as well as a high speed vibration. I need to takle this same rear. Glad to see the job before hand. I will be Closely taking pointers on the part 2 reassemble. Thanks Ray

@bobherweg6442 3 дня назад

Sounds like rear universal.

@michaelpressman7203 2 дня назад

@@bobherweg6442check the universals first

@lookin424 2 дня назад

@@bobherweg6442 I replaced the drive shaft it is all brand new. It did help, but the vibration is still there. New tires and freshly balanced. Alignment was checked and redone all good. With the drive shaft disconnected from the rear end there is a notable amount of play moving the pinion flange forward and backwards and all of the drive shaft play that I can feel in the shifter goes away I cannot move the drive shaft at all connected into the transmission so there is no play in the four-wheel drive or transmission once disconnected from the rear end. Last thing I need to do having done all of that is to crack open the rear end. I think I have a broken bearing race or cage in the pinion part of the rear end assembly

@tc410 3 дня назад

That thing sounds like an air raid siren!

@westvideo 2 дня назад

Dave's new nickname will be Radar

@seamasrigh2162 2 дня назад

"Hey! It's that guy." That was IMPRESSIVE.

@johnt.848 2 дня назад

Wrong channel. 🤣

@williamsquires3070 3 дня назад

“It’s ‘limited slip’ only until you spill lubricant on the shop floor. Then it’s ’unlimited slip’!” 😅

@ryburnsjr 3 дня назад

Baseball cards in the spokes

@Michael-yi4mc 3 дня назад

Poker card is better since it’s laminated

@jackbowman4788 3 дня назад

Morning Ray- I got nervous when you were under that truck with the engine in gear ! Just me I guess !

@1jackvalley580 3 дня назад

Nope, You were not the only oneJack

@williameldridge9382 3 дня назад

Then you fundamentally don't understand physics.

@kennybaumann2117 2 дня назад

@@williameldridge9382Well I guess I don't fundamentally understand physics either so please explain how they are applicable in this scenario.

@alanclarke2524 2 дня назад

No. Not just you, but I was more concerned as he lowered the truck towards the ground with the driving wheels still powered.

@kennybaumann2117 2 дня назад

@@alanclarke2524 Me too I that's why I asked @williameldridge9382 why he responded we don't understand physics because of our concerns. He has yet to respond so must be a keyboard troll.

@daveanderson2865 3 дня назад

Full bearing rebuild is in order if the owner is going to keep truck. Otherwise, minimum replacement.

@dnclark79 3 дня назад

Following up on a previous comment I made about Dave being quoet and that is why I like him as part of your channel. Back in the days before your own shop, there was a video where you changed a compressor on a ford van. One of your coworkers came to tell you to make sure to have the bolts in the compressor when reinstalling for the clearance. I am sure that mechanic was trying to be helpful, and social. Or at least trying to get through the day. Dave is recognizably skilled. When he helps you out, he makes sure he understands what help is needed, and doesn't try to one-up you

@olddrummer1942 2 дня назад

Dave probably quiet because he can't get a word in over Ray's talking!! LOL. (Just Jokin' folks)

@wolfpreist 3 дня назад

may favorite use for used newish oil is drill bit lubrication

@peterwill3699 2 дня назад

And used transmission oil makes a grate winter rust prevention up north.

@reaper352c5 3 дня назад

when you put the gloves on, the first thought that came to mind was bend over and cough. lol

@Bfaided 3 дня назад

I mean he is servicing the rear end

@peterlennon1139 3 дня назад

😂😂😂😂 @@Bfaided

@doncnunez6231 3 дня назад

And both hands on the shoulders!! 🤣

@sweezyjackson4935 3 дня назад

The coughing is for hernia check. Bending over is prostate. What kinda Dr you going to that wants you to cough after bending over? 😂

@rickydonahue1586 3 дня назад

@@doncnunez6231😳!🤔? 🤣🤣🤣

@benrandomly2016 2 дня назад

Looking at those back tires and weirdness with the pinion bearings, I bet a kid has been out doing power brake burnouts. I use to see this a lot in the 1990s in V8 cars from the 60s, 70s, and 80s. I hope you get this job for a full rebuild.

@CatsMeowington 21 час назад

"I need a little bit of protection for reaching deep into the rear", and upon reassembly, we recommend a tube or two of Desitin be applied to the affected area of noise, I know it works for me!

@ChrisLincolnHomes 2 дня назад

"Using the whole fist there doc?"-Fletch lol

@stevemccauley5734 2 дня назад

Best movie EVER

@jamesmoore7106 2 дня назад

Hey, you can mix that with a little bit of regular drain oil and use it for chain lube on your chainsaw. I’ve been doing that for years.

@ralphedds1 3 дня назад

Once I saw the tires, I remembered the truck.

@rjc862003 3 дня назад

the soft preload on the limited slip clutch sprags would be enough to prevent diff action without any load on it

@martinmurphy4852 8 часов назад

You have the patience of a saint and evidently the heat resistance of a camel. Maybe I am just getting older but I can't do the simplest thing with my car anymore. Within 3 minutes my clothes are soaked in sweat and shortly after that my glasses are also covered and I can't see what I am doing anyways

@SuperBighead1973 21 час назад

I’ve been a fan of the Axel Saver Bearings anytime I’ve ever had to work on a rear end. An Axel Saver is built the same as a regular bearing, except they’re wider (double thick). It allowas you to keep an axle that otherwise would have to be replaced. If you’re working on a budget, they are lifesavers.

@otissmith7057 21 час назад

That proctologist snap of the glove when you had to 'go deep' for the retaining clips got me.

@MarkWatson-xi1ry 3 дня назад

Limited slip? I don't see any springs or clutch plates, also there was no tag on the cover bolt to use special additive.

@darkerbinding6933 День назад

If I was the owner, I'd let you do the full meal deal on the axel. You've already got it taken apart.

@JRS-iq9pz 3 дня назад

Interesting. Can't wait to see the rebuild.

@petethefat2614 22 часа назад

I’d have to agree with you ray. The rear end in this ford is super finicky and if someone torqued it down too much it will make that sound.

@Paramount531 3 дня назад

Great video! I haven't done much differential stuff, only one has ever failed me on a Pinto station wagon in the early 80s. A $75 used rear axle at the wrecking yard solved that one.

@michaelpressman7203 2 дня назад

Blown up u-joints,yokes and blew a spider gear threw the rear end housing 😢

@DanielJohnson-ec8rk 2 дня назад

Brave man to admit to owning a Pinto

@DocZoidberg549 2 дня назад

@@DanielJohnson-ec8rkMy first car was a sh*t green pinto wagon. It was the 70's and I was so happy to have transportation. It wasn't like today with spoiled kids that don't appreciate what they have.

@DanielJohnson-ec8rk 2 дня назад

@@DocZoidberg549 when I was 17 I bought an 82 Trans am. This was about 1989. My insurance was $300 a month for bare Minimum liability. After 6 months of paying for insurance, I traded it straight across with my mom’s mechanic for an AMC Pacer. Yes, it’s true. Now that car was embarrassing but cheap and reliable

@doleph1 День назад

"A noise" is an understatement. Holy heck!

@therealblue42 День назад

Perfect example of why bearings have to be tested under load. Nice work!

@JonathanDeaux 3 дня назад

RAY! I subscribed to your channel about a month ago, been watching a ton of your vids. Today, I go to check on any new vids only to find out I was unsubscribed, had to re-subscribe. Something wonky with RU-vid because I damn well didn't unsubscribe.

@RainmanRaysRepairs 2 дня назад

Yea YT does that all the time. It’s really annoying

@RobH. День назад

Thanks!

@whatwasthat3269 3 дня назад

Shop looks fantastic.

@mikelococo3254 2 дня назад

Just had mine replaced last month same noise. New diff and bearings all around. Worked great did complete break in procedure. 3500 miles later same whining. Going back to shop tomorrow.

@ALConfederate День назад

Simple, just turn the radio up. No more differential noise! I agree -- if it were me I'd replace all of the bearings and associated parts, maybe even the center section as well.

@garypatton9720 2 дня назад

Hi Ray. Those Ford 8.8's have been known to have their pinion nuts loosen up all by themselves and they can make that horrible noise even if the bearings still look good. That's why they recommend to use a new pinion nut with red thread locker upon reassembly. That doesn't explain a resistance to turning freely though ...

@Papieck37 3 дня назад

Had the same issue 2 times with my 1988 E30 325is BMW.... Ended up doing a complete rear diff overhaul.

@charleskadletc2431 2 дня назад

Good honest work.

@Wartai 2 дня назад

When you drove off with that Helicopter sound, you drove it further than I would have ... I was waiting for the diff to explode

@squiggyg.8415 3 дня назад

I noticed I was holding my breath when he was lowering the truck 😎

@confuse3671 2 дня назад

1) it's a crush sleeve, not crush washer. 2) That is not a limited slip differential, that is an open diff. Those "clutch packs" are actually shims. 3) Yeah, someone over tightened the pinion. The races are probably not smooth anymore. I had one that actually cracked the race. Snap on makes special punches to get at the races - highly recommended (under the category - the right tool saves you lots of time). 4) I've never seen diff fluid look so much like water and have soap bubbles in it... That's supposed to be 90 weight??? How hot is it in Florida? New bearings should be set for 25 in-lbs drag torque. That includes the side bearings.... There is no way a diff should have fallen out like it did. Recommend you install the diff without the pinion, set the side pre-load, then install the pinion. I would also check the backlash and pattern just to be sure. Someone's been in there. Tapered bearings are supposed to have pre-load to survive. I like getting differential parts from Tom's Differentials. When Tom still owned it he gave me lots of advice on my first differential rebuild and gear swap after I messed up the first set of gears (I was too loose on the backlash). I would also recommend getting the GM gear marking compound. It is yellow, contrasts nicely with the black metal parts. Heck, by an install kit from Tom's. I think all of them are Timkin, made in USA bearings. BTW, are the side shims under the bearings? Is that a Dana? I hate Dana's for that reason alone. Give me a GM any day over a Dana. I know Dana 60s require pinion spreaders to make your life easier - but they are expensive. See OTC. BTW, before I did my own rear end work, I found offroad and 4x4 shops were the most economical way to do it. Those guys did gear swaps day in / day out and it was something like $500 / axle. Now a days, the gears alone would probably cost that. Sorry for the long response

@gregjohnson2073 2 дня назад

Maybe he torqued it to 25 ft lbs.

@mivitel 2 дня назад

Not related to this video, but I want to mention that Ray's lines even reached The Netherlands. I had to change the light bulb on the front of my car. To remove the whole unit (thanks Volkswagen) I said to myself that I have to "popping zee hood".

@keithhastings4092 2 дня назад

Wow. Just wow.

@garypillischafske1425 2 дня назад

I believe you are correct. The adjustments had been tinkered with for those bearings, causing a lot of stress in that diff. Good catch!

@kevincurry4735 3 дня назад

Happy Friday Ray. Noise instead of Words. Wow sounds like a sewing machine on its last legs.

@gmoffat70 2 дня назад

It is a very common problem. I had a 2008 that did the same. They were originally recalled. If noise just started it can be shimmed. It's just the gear alignment. Even when parts look perfect. I had to get all new rear end parts from driveshaft yolk to inner wheel bearings.

@lawrencecavens5760 2 дня назад

I think you missed the noise - To me it sounded like the back lash was Way to Way out of adjustment and if you look closely to the ring gear at the outer tip the pinion wasn't set right and was extremely loose. Bearings don't sound like that They just growel

@catherinemorgan2741 3 дня назад

Good Day Ray and hi to Dave

@Hobotraveler82 2 дня назад

Like to see another part. For some odd reason this truck fascinates me. Been enjoying watching the videos on it. Of course, all your videos i find fascinating. Great job. 😊❤

@timanglin89 2 дня назад

Dang man, your shop sure has come a long way. It’s looks great!!

@martylandry751 3 дня назад

Great job

@fleece192 2 дня назад

Good video, always learning stuff. On what to do.. and not to do. Like filming under a running vehicle 🚗

@kirk1065 3 дня назад

As a diff. tech for many years it's my opinion you should look at replacing ring and pinion with the bearings it will make noise if you don't

@wilbilt 2 дня назад

It looks like that ring and pinion are toast, especially the wear at the outer edges. Slamming around with that much backlash likely did them in.

@kirk1065 2 дня назад

@@wilbilt 👍

@stillraven9415 3 дня назад

I dont know what you did but the only time o heard any difference at all was right at the diff cover

@Michael-yi4mc 2 дня назад

I had a 1978 Dodge Aspen with locking diff. A special additive fluid , four ounces)was required to be added to the differential to quiet the clutch packs in it.

@johnlacroix1639 День назад

I like the video and WOW amazing TY so much ,,Keep up the great work

@thevideoscrutinizer8312 2 дня назад

I watch all the time. When you pulled into the shop today I didn't see your sign for the shop! Give a look at it when you get a chance. 😊

@philsonnenberg6092 3 дня назад

Least of your worries with that year F150. Pretty sure that thing is part of the recall that is due to the trans downshifting to first at any speed. Quality UAW made vehicle!

@kendrickgrimes7747 3 дня назад

Same rear-end as my 2003 Dodge Ram 1500 5.7. Mine started whining bad at 243K. Sounded just like this except no play. The siren was running! It was the large pinion bearing race failed. It was quite pitted and pieces flaked off. Bearings weren't that bad. Had to clean all the metal flakes from the entire axle. Replaced all bearing, races and seals as Ray is doing here. Installed a Truetrac unit and did not deal with the crush sleeve but instead utilized one of the kits that has shims. Took a little trial and error but got it all perfect. Now 10K later and still perfect. Nice thing about Truetrac is that it has no clutches to wear out as the clutches on mine were worn out. New trucks are too expensive so I invest in mine for the future. Compared bad race to pictures on internet and clearly showed that it was metal fatigue from the miles of use.

@RenegadesGarage 3 дня назад

Rainman Ray.. I would definitely do a complete rebuild on it. And now is the perfect opportunity to change the gear ratio. Why not, right?

@TimSwannell 2 дня назад

When you show the close up of the bearing race at 24.04 you can see it has ridges in it; the rollers falling into these grooves is what is causing the noise, essentially cogging. It could be an under hardened race or it could have been someone putting way too much preload on the bearing (its probably a combination of the both)

@THEDRAGONBOOSTER8 2 дня назад

Great video..

@btwbrand 2 дня назад

I'm doing this on a 2004 tomorrow. Truck has 114K miles. The noise is almost as loud as this. Owner did not complain one bit about it.

@timcarlyle147 2 дня назад

my brother had same issue 3 week ago ford f 250 found bearings were bit tapered customer did rebuild come out great

@tsimpson007 2 дня назад

Love that bearing noise. Ray I hope you and the wife unit are doing well.

@bblod4896 2 дня назад

I'd replace all the bearings since it's already apart and perhaps the clutch (friction ) plates if the wrong differential lubricant was used. Looking forward to part II.

@5695q День назад

new bearings and seals all the way around and hope the owner understands that the diff would be a good choice to change also. Rear end would be good for the rest of the trucks life.

@bootinnj 2 дня назад

thats a hard diag but of course you got this your rainman ray! cant wait to see the rebuild if customer agrees.

@fanofoldfans9238 2 дня назад

I think it's the inner pinion bearing race. just an observation. I agree rebuild the whole rear end or put a used one in it. Great troubleshooting method.

@XENONEOMORPH1979 3 дня назад

new parts kills the doubt and fresh parts.

@HypocriticYT 3 дня назад

My Camaro had the diff howl twice until I replaced the gears with Yukon gears and upgraded the ratio 😅

@brianmckenna3440 3 дня назад

Great video Ray Man interesting mate 👍

@stevenakn1 2 дня назад

Finally a new tool box appearance🙂

@CedroCron 2 дня назад

Good call, I'd rebuild it so you can stand behind it. It's only going to serve the customer into the future anyway so might as well do it right the first time and then forget about it. Also Amsoil Severe Gear will do a great job in this Rear-End.

@patricknesbitt4003 2 дня назад

I remember replacing front wheel bearings on a Plymouth Horizon where the owner's son rode the brakes for 2 miles coming down a mountain heating the rotors to the point where they turned blue and cooked the grease in both bearings. Test driving the car produced a noise that sounded like a twin engine Cessna flying 10 feet over the car.

@1DarkStorm 2 дня назад

Welcoming back!

@petermccoll469 2 дня назад

rear differential rebuild looks like the way to go

@DarkLord89213 3 дня назад

Morning Ray

@williammyers5911 2 дня назад

I concur, it sounds like a bike with cards in wheels attached with clothes pins

@garywalstrom2603 2 дня назад

I would start looking for recycling yard replacement part.

@user-jn9xh5nt3t 3 дня назад

What a unique anti theft alarm.

@bobbg9041 2 дня назад

It really sounded like the pion was slipping I'm surprised it didn't chew them up. If it was mine I'd take this time to do a full rebuild and upgrade to the way he drives either speed or power like you did on the Jeeps. He can always sell the used parts as a set.

@marksmith-ew7ir 2 дня назад

I have seen you put new bearings in axels and you have said set the correct tension on bearings to gain the uneven wear not to shorten the life .

@TheJcrandazzo 2 дня назад

Pinion preload and mis adjusted ring to pinion gears

@lokigames5091 2 дня назад

I think you're probably right, someone tried to tighten the pinion.Hey Dave🤘🤘

@RAYROTHSTEIN66 2 дня назад

Those dark lines on the outter races on the pinion bearings are the cause of the noise. It's like little digits the bearing has to roll over.

@Bowhunters6go8xz6x 2 дня назад

Any sign of unusual or uneven wear on the pinion bearings or races, if there is pitting on a bearing there will also be pitting inside the running surface inside the bearing cage that you cannot see ! I agree with you that it wouldn't hurt to get a new or remanufactured rear differential so everything is new and change all the bearings including outer axle bearings.

@robames1293 2 дня назад

When I first heard the noise when you were driving it sounded similar to UJ noises, possible the tone relative to road speed. I didn't think of pinion bearings though.