No video :(

Screek MMWave Sensor that can count people!

Подписаться 3,4 тыс.

Просмотров 9 тыс.

50% 1

Screek Sensor: www.ebay.com/itm/185986815148...
Beta Firmware: www.dropbox.com/sh/rhk6m80y5f...
Some items in my smart home:
Zigbee smart bulb: s.click.aliexpress.com/e/_Dnq...
Shelly Uni: s.click.aliexpress.com/e/_DmQ...
Athom 4 gang switch: s.click.aliexpress.com/e/_Dkt...
ESP32 Dev board: s.click.aliexpress.com/e/_DeN...
Shelly 1: s.click.aliexpress.com/e/_Dkd...
Shelly Dimmer: s.click.aliexpress.com/e/_DCj...
CO2 Sensor: s.click.aliexpress.com/e/_Ddl...
Great contiuous super bright LED Strips with no dots : s.click.aliexpress.com/e/_DCF...
Weather station: s.click.aliexpress.com/e/_DEC...
Broadlink Pro for controlling IR devices like TVs: s.click.aliexpress.com/e/_DEE...
Athom local control ESPHome smart plugs:s.click.aliexpress.com/e/_DeK...
Zigbee smart blind controller: s.click.aliexpress.com/e/_DFl...
Raspberry Pi: s.click.aliexpress.com/e/_Dkl...
Kingston SSD RAM: s.click.aliexpress.com/e/_DFq...
Ice Tower Cooling Fan: s.click.aliexpress.com/e/_DmI...
Some of the links above are affiliate links, where I earn a small commission if you click on the link and purchase an item. You are not obligated to do so, but it does help fund these videos in hopes of bringing value to you!Some items in my smart home:
Zigbee smart bulb: s.click.aliexpress.com/e/_Dnq...
Shelly Uni: s.click.aliexpress.com/e/_DmQ...
Athom 4 gang switch: s.click.aliexpress.com/e/_Dkt...
ESP32 Dev board: s.click.aliexpress.com/e/_DeN...
Shelly 1: s.click.aliexpress.com/e/_Dkd...
Shelly Dimmer: s.click.aliexpress.com/e/_DCj...
CO2 Sensor: s.click.aliexpress.com/e/_Ddl...
Great contiuous super bright LED Strips with no dots : s.click.aliexpress.com/e/_DCF...
Weather station: s.click.aliexpress.com/e/_DEC...
Broadlink Pro for controlling IR devices like TVs: s.click.aliexpress.com/e/_DEE...
Athom local control ESPHome smart plugs:s.click.aliexpress.com/e/_DeK...
Zigbee smart blind controller: s.click.aliexpress.com/e/_DFl...
Raspberry Pi: s.click.aliexpress.com/e/_Dkl...
Kingston SSD RAM: s.click.aliexpress.com/e/_DFq...
Ice Tower Cooling Fan: s.click.aliexpress.com/e/_DmI...
My gear:
Rode Wireless Go Mic: s.click.aliexpress.com/e/_DFw...
Camera: s.click.aliexpress.com/e/_Dlo...
Some of the links above are affiliate links, where I earn a small commission if you click on the link and purchase an item. You are not obligated to do so, but it does help fund these videos in hopes of bringing value to you!

Опубликовано:

2 авг 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 28

@74357175 Год назад

It's the season of the mmWave sensor 😂

@simonsayshomeassistant Год назад

Oh yes it is evolving almost as fast as AI!

@rasbe6863 Год назад

I'm looking forward to getting mine in the mail soon. I had a lot of problems with the Athom one resetting and not reading correctly. Everything I read about this one seems like it's much higher quality

@simonsayshomeassistant Год назад

Yes, I agree and the shipping is pretty fast too! It seems this company is putting allot of effort into writing better software to control it too!

@raresvintea1 11 месяцев назад

@@simonsayshomeassistant have you problems with Athom?

@simonsayshomeassistant 11 месяцев назад

No problems with mine @@raresvintea1

@HATipsByLarry Год назад

Yea they are using the LD2410B sensor with a BH1750 light sensor. I have a D1 Form factor ESP32 with a LD2410C mmWave sensor i built myself which works very well. I think i paid 3.50 for the mmWave sensor and 6.50 for the D! form factor ESP32 and about 2 for the small project box its in. Of course you have to put it together yourself so there is that. 😁 I'm working on a Multi-sensor with a LD2410C, BME280 and a BH1750 sensors in it.

@simonsayshomeassistant Год назад

Nice one Larry, DIY is great!

@HATipsByLarry Год назад

@@simonsayshomeassistant Yes if you want to keep the price down it very much is. Although this one's price wise is not all that bad compared to the Aqara FP1 and FP2. I bought one of the FP1's when they first came out and about a week ago it stopped working. Tried everything to get it working again but no luck. The nice thing about making your own is if it craps out you can just replace the sensor or the micro controller that stopped working and your back in business. That's why i'm putting the parts plugged into headers. Makes the project somewhat larger but easy to fix.

@geesharp6637 Год назад

That's great. I have same parts but having problems getting the config correct. Would really like to see a working example.

@HATipsByLarry Год назад

@@geesharp6637 I put this in a project box but even after drilling holes for the BME280 and the BH1750 sensors the BME280 temp/humidity sensor readings was wrong so as you can see in the config i built lambda math functions so i could adjust the humidity and temp readings. If you don't need that you can remove them.

@HATipsByLarry Год назад

@@geesharp6637 if you want just the D1 form factor ESP32 and the LD2410 mmWave sensor here is that config uart: tx_pin: 01 rx_pin: 03 baud_rate: 256000 parity: NONE stop_bits: 1 ld2410: timeout: 5s max_move_distance: 2.25m max_still_distance: 2.25m g0_move_threshold: 45 # 0m / 0' g0_still_threshold: 15 # 0m / 0' g1_move_threshold: 45 # 0 - 0.75m / 0 - 2.46' g1_still_threshold: 15 # 0 - 0.75m / 0 - 2.46' g2_move_threshold: 40 # 0.75 - 1.5m / 2.46' - 4.92' g2_still_threshold: 15 # 0.75 - 1.5m / 2.46' - 4.92' g3_move_threshold: 40 # 1.5 - 2.25m / 4.92' - 7.38' g3_still_threshold: 15 # 1.5 - 2.25m / 4.92' - 7.38' g4_move_threshold: 40 # 2.25 - 3m' / 7.38' - 9.84' g4_still_threshold: 15 # 2.25 - 3m' / 7.38' - 9.84' g5_move_threshold: 40 # 3 - 3.75 / 9.84' - 12.30' g5_still_threshold: 15 # 3 - 3.75 / 9.84' - 12.30' g6_move_threshold: 30 # 3.75 - 4.5m / 12.30' - 14.76' g6_still_threshold: 15 # 3.75 - 4.5m / 12.30' - 14.76' g7_move_threshold: 30 # 4.5 - 5.25m / 14.76' - 17.22' g7_still_threshold: 15 # 4.5 - 5.25m / 14.76' - 17.22' g8_move_threshold: 30 # 5.25 - 6m / 17.22' - 19.68' g8_still_threshold: 15 # 5.25 - 6m / 17.22' - 19.68' sensor: - platform: ld2410 moving_distance: name: Moving Distance still_distance: name: Still Distance moving_energy: name: Move Energy detection_distance: name: Detection Distance binary_sensor: - platform: ld2410 has_target: name: Presence has_moving_target: name: Moving Target has_still_target: name: Still Target Hope this helps.

@BradleySmithies Год назад

FYI the BH1750 is a light sensor not the MMWave

@simonsayshomeassistant Год назад

Thank you Bradley

@barygol 8 месяцев назад

How does it compare to Aqara Fp2 and other commercial mmWave solutions?

@simonsayshomeassistant 8 месяцев назад

This is a much more DIY type device than FP2. It has some great features and the team are upgrading the software on a regular basis. It can sense 3 people in a room vs 5 on the FP2

@IronicoII 10 месяцев назад

Please send pinoia ld2450, and esp32c3 connections

@simonsayshomeassistant 10 месяцев назад

Here is a picture of the wiringh, just check the pins on your version of ESP32 C3 facebook.com/photo/?fbid=10161430441204744&set=gm.851977529468226&idorvanity=595676065098375