A couple of tricks that I use are to photocopy my patterns in red. It makes it easier to follow the lines. The other trick is to dip the top end of my blades in whiteout. That way you know which way to install the blade.
So Earlier this week i asked a few scroll noob questions and got the answers I needed. That said I also bought a Foot Switch, Prior to seeing this video, and a foot switch needs to be part of the starting kit, It gave me the control I needed and allowed me to focus on feeding the wood properly. If you don't have a foot switch get one you will be glad you did
You're very welcome Jerry. I'm glad that you are finding the videos to be useful. If you have any questions along the way, please don't hesitate to ask. I'd be more than happy to help if I can. Thanks for tuning in and for the kind words.
Ken, I agree 100%. I have also been scrolling for decades and my list would be awfully close to yours. Funny thing, the 2” square. For years and years I used the method of squaring blade where you make a cut in a piece of wood then see if the cut lines up when you move the piece of wood behind the blade. One day while looking through a catalog I saw a 2” square for just a few dollars. I bought it and it has never been away from my saw since. Sure does work better than any other method. Thanks for sharing your list.
LOL. I used to use a similar method Paul. I would cut a large interior cut and make sure that it slid perfectly in and out of the kerf from both directions. If it got stuck at all, the cut wasn't square. Thanks for tuning in and for taking the time to share some of your experience with us. It's appreciated.
I love your videos they are very detailed and Helpful. I decided to take up the hobby of using a scroll saw when I was 68, exactly 1 year ago. I only wish I had have taken it up years ago. So many things to learn and do and your videos have made it an easy task for me. I love love love them and the craft. Thank you so much. The great thing is when hubby and I go shopping now he can not believe that I make a beeline for the tools, the look on his face is pretty close to what the look on my face used to be when he headed that way as well...lol
Lynn, it is comments like yours that make all the work to produce the show, completely worth it. Scrolling is (bar none) the most relaxing form of woodworking and coming from someone who has been woodworking since the age of 10 and scrolling for the past 25 years, I can honestly say that they are the best hobbies. Just a ton of fun. Thank you so much for the kind words on the show and for tuning in. I truly appreciate it. If you ever have any questions, please don't hesitate. I'd be more than happy to help if I can.
Lynn, I am just starting. I got my saw last week and I will turn 67 this year. I am a bit overwhelmed, as this is something so new to me. I am trying to learn all I can and I was so glad to see another lady (and my age) commenting. And thank you, Kenney, for the get information.
I hope you are enjoying your scrolling Eddie. If you ever have any questions along the way, please don't hesitate to ask. I'd be more than happy to help if I can. Thanks for tuning in to the show.
Wow. Thank you soooo much. Been scroll sawing off and on for years. I wouldn't have thought of some of these but I do now. I was waiting to hear the foot switch idea. Got one and it's been a whole new world since. REALLY great video. Thank you again.
You're very welcome Mark. I'm glad to hear that you enjoyed the video and I have to agree with you, that adding a foot pedal really adds a whole new dimension when scrolling. Although it won't improve anyone's scrolling abilities, it does greatly improve the operation of the machine. Thanks for tuning in to the show and for taking the time to leave the kind words. It's very much appreciated.
Kenny as someone who shares your passion for gadgets, tools and robust organisation I really enjoyed this video. Loved the magnetic label and the stand storage ideas - ideas I intend to imitate. Whilst I appreciate it's a matter of preference, I would have added a ' right height stool' to my list of accessories - but then again that might be an age thing! So now I'm off to sort my blades, label my test tubes and see if I can get a foot pedal for my new Jet 22B.
A properly adjusted seat when scrolling is a very important accessory regardless of ones age. This is a list of my top ten but that doesn't mean that it is the ONLY ten. Thanks for chiming in with your addition to the list. It is very much appreciated. Thanks for tuning in to the show Mike. Please don't hesitate to ask any questions you might have.
I watched a video recently where someone made sanding sticks by glueing sandpaper to old blades and mounting them in the saw.. I haven’t tried it yet but the person on the video said that it works well. I loved your dramatic countdown. And I think you have some great tips.
That method definitely works C.W. and there's nothing wrong with doing that. In fact, it would be a great use for used up, dull blades. Thanks for tuning in and for taking the time to leave your kind words on the show. I truly appreciate it.
You're very welcome. If you have any questions along the way, please don't hesitate to ask. I'd be more than happy to help if I can. Thanks for tuning in to the show.
The most important thing in woodworking is to do what works for you. It sounds like you already have this all figured out. That's fantastic. Thanks for tuning in to the show and for chiming in with your methods. It's very much appreciated.
Great idea Mike. Anything that can help you is a good thing. Just be careful of over torquing the thumb screws and stripping them out. It's a real pain in the butt when that happens. Thanks for tuning in to the show. It's appreciated.
Nice video ! I also made a wooden square that fits over the wingnut that tightens the blade. It is much easier on your hand when you are tightening the blade
Great idea Mike. Anything that can help you is a good thing. Just be careful of over torquing the thumb screws and stripping them out. It's a real pain in the butt when that happens. Thanks for tuning in to the show. It's appreciated.
That's awesome Patsy!!!! I'm glad that your husband is supportive of your hobby. Enjoy your foot pedal. It's a whole new ballgame now. Thanks for tuning in.
You are very welcome. I'm glad I could suggest things that you hadn't thought of. Thanks for tuning in to the show and taking the time to leave a comment. If you have any questions at any point in time, please don't hesitate to ask. I would be more than happy to help if I can.
I'm glad that you found the video to be helpful Eduardo. Thank you for tuning in and for taking the time to leave your comment. It is very much appreciated. If you have any questions along the way, please don't hesitate to ask. I would be more than happy to help if I can.
6 of the 10 tips were new to me and very interesting. I used an old sewing machine from my wife for the pedal. everything is there and connection simple. the magnifying glass will cost another penny, but it will come anyway. still looking for a generous dentist ;-). keep them coming Ken, love to see you in action. grts, ivan
Thanks for the kind words Ivan. I'm glad that you were able to take something positive away from the show. Here is a link to the picks if you are interested. www.leevalley.com/en-ca/shop/tools/hand-tools/picks-and-scalers/31063-carving-and-clean-up-picks?item=86K9501 Good luck with your scrolling and thanks for tuning in to the show.
I have definitely been scrolling for a long time and I have enjoyed every minute of it. Thanks for the kind words on the show and for tuning in. It's very much appreciated.
All you need to do is ask Lance and I would be more than happy to help out and share every ounce of experience that I have. Glad that you liked the show. Thanks for tuning in sir.
Seen that this video was made 4 yrs ago. Just added the Axminster Profesional Scroll Saw to my arsenal...this video invaluable as a brand new guy to the world of scrolling. So thanks fir the great vid. Im off to look thrrough your other vids. Cheers from the UK 🇬🇧
Not to worry about the age of the show Joe. I am still here and still producing videos. There are well over 600 episodes of the show to choose from on the channel so I hope that you will be able to find something of interest. If you have any questions along the way, please don't hesitate to ask. I'd be more than happy to help if I can. Thanks for tuning in.
@acutabove_woodworkings that's awesome! Glad you're still going strong 💪. I do have one question...more probably to come. What make and model is your magnifier. I've used a small one and the difference is already great. However I do need a bigger scope on the lense. Thanks again!
@@ReplicantDream Unfortunately, the magnifier I use on my saw has been discontinued and it's a real shame. The lens is huge and the magnification is fantastic. I do have a second one that I use on my bench that is really great as well and while the lens isn't quite as large as my scroll saw magnifier, it is still an amazing and very clear unit that would work well on the scroll saw. You can find it here. www.leevalley.com/en-ca/shop/home/lighting/worklights/76037-led-magnifying-bench-lamp?item=17J3030 I hope this helps.
You're very welcome. Good luck with your scrolling. If you have any questions, please don't hesitate to ask. I'd be more than happy to help if I can. Thanks for tuning in to the show.
This is a good vid Kenny, I was reviewing scroll saws just now and came across this one. I love the detailed information you always give, best review so far and I always learn something from your video's. I think you are abig assett to our wood working community.
You're very welcome. Glad that you liked them. Sorry for the delayed response on this comment. For some reason, it got categorized in the spam folder. Thanks for tuning in.
Hi Kenny, I was waiting for it, and I totally agree with you. Foot pedal is #1 with me too, and a good quality magnifier w/light is definitely #2. I wouldn't want to cut w/o either of them, as they make such a huge difference! I also liked your idea of using the magnetic strips to hold/label the used blades on your saw, and will start doing that...it's much better than what I'm doing now and will eliminate any confusion later, so thank you for that tip. One thing you didn't mention was using files to clean up edges and flats. Small detailing files and larger files work great for cleaning up any fuzzies or cuts that might be a little rough or slightly misshapen, and it's much faster (and cheaper) than trying to use sandpaper. Just use the roughness of the file to match the job you are trying to accomplish. I know this is an older video but I always enjoy your show, and I always learn something. Thanks!
Thanks for the kind words on the show Dave. I appreciate it. Great advice on using detailing files to clean up your work. Although my list is just a top 10, that doesn't mean that there are only ten accessories and your suggestion is a great one. Maybe I should have made it the top 11 scroll saw accessories. LOL. Thanks for tuning in to the show and for taking the time to chime in with your suggestion.
Didn't mean to insinuate in any way, that your list was wrong or that it should have been longer, and I hope you didn't take it that way. It was a great list and I enjoyed hearing all your suggestions, just thought I'd add one to it, lol. I always enjoy watching your show and I've been a long time subscriber, hope you'll keep up the good work.
@@MnktoDave No worries Dave. I'm always open to new suggestions and I know that this is not a definitive list. I welcome all additions to it and yours was no exception. Feel free to add or suggest as many add-on or accessories as you like. No matter how old we get or how experienced we get, there is always room to learn more. Thanks for chiming in.
Thanks for the tips. Using sanding strips was the least useful tip for me and I agree the the foot switch was the best tip. One tip that did not make the list was dust collection. I have a small cyclone dust collector that comes on when the scroll saw is turned on, reducing dust by a significant amount. These tips are all helpful. I also agree that working on a scroll saw is relaxing and fun.
Duct collection is one of those grey areas when it comes to scroll saws Tom and I may have to do a show at a later date to show how to combat the dust problem with them. I like your idea. Thanks for the kind words on the show and for tuning in. I truly appreciate it.
Instead of a 2" square I made a template from a 2" x 4" x 1/4" piece at wood that I have cut a vertical saw kerf in 90° to the table. I, then, slide the template behind the blade to see if it slips into the kerf cleanly. If it does, I know it is 90° to the table. Quick, simple and free.
And there is absolutely nothing wrong with that. Tools in the shop don't have to be store bought. As long as they do the job, that's all that matters. Thanks for tuning in and for chiming in with your method. It's appreciated.
There are plenty that could be "honourable mention" Girth and I totally agree with you that a comfortable seat is an important asset. Thanks for tuning in to the show and for chiming in with your suggestion. I truly appreciate it.
They are definitely not a necessity but they do make scrolling a lot more enjoyable. Thanks for tuning in Phil and for taking the time to leave the kind words.
Yes. Enjoyed very much! Going to buy a light/magnifier. So when you talk of sanding the back of the blade I am thinking that you literally mean simply rounding off the squared back of that saw blade. Anyway gonna find drawers and I have an extra foot from my seeing machine that I could use. I'm gonna try that, too. Thank you. Keep the info coming. Joy. Pgh, PA
That is exactly what I mean with regards to rounding the blades. The back edges are quite sharp and the burrs dig into the stock which cutting, causing extra blade drift. Rounding the back edges of the blade will help to reduce the drifting. I'm not so sure that you sewing machine pedal will work Joy but there's no harm in trying it. Sewing machine pedals are generally variable speed where you speed up the machine, the more you press the pedal. The scroll saw speed control is obtained by the saw's controls and the pedals are strictly a contact to turn it either on or off. I hope it does work for you though. That would be awesome. Glad to hear that you are gearing up for scrolling.
Glad to hear that you are enjoying the show Harry. Thanks for tuning in and for taking the time to leave a comment. If you have any questions at all, please don't hesitate.
That would work as well Frank. As long as the edges are square, it really doesn't matter what you use. Great idea. Thanks for tuning in and chiming in with your methods.
You're very welcome Howard. I hope you found it useful. If you have any questions along the way, please don't hesitate to ask. I'd be more than happy to help if I can. Thanks for tuning in.
I'm sure that I can add that to my list of show ideas for a future episode. Thanks for tuning in and for the show suggestion. It is very much appreciated.
You're very welcome. Good luck on your scrolling adventure. If you have any questions along the way, please don't hesitate to ask. I'd be more than happy to help if I can. Thanks for tuning in to the show.
Thanks for the kind words on the show Rafael. If you check in the playlists of my channel, you will find over 25 turning videos. Some are very much geared to the beginner and might give you some ideas as to small projects that you can turn. I hope this helps. Thanks for tuning in to the show.
Bah!!! Once you've been scrolling as long as I have, you can do that. First, you must let go of your anger and feel the force flow through you. But until that happens, feel free to continue tuning in to the show. I appreciate your support. Thanks for tuning in.
Good thing peanuts aren't cheap, because these squares aren't either. LOL Great video, I just bought an original Purple EX21 Excaliber Scroll saw made in Canada. for $125.
That's a great deal on the EX21. The older purple edition were great saws and you are going to love it. Thanks for tuning in and taking the time to leave a comment. I truly appreciate it.
The foot switch is a momentary contact that would allow you to kill the power to the saw right away upon breaking a blade. Don't let it scare you Verna. Blades are a consumable in scrolling and from time to time, they break. It will always make your heart jump a little when it happens but it is definitely nothing to be concerned or frightened of. Thanks for tuning in to the show.
Great video as always and some great tips. No 5, I used the magnetic material to make a table protector. You can make a smaller hole for the blade this way too and works well (I put this to SDGood on RU-vid and he featured it on a video but did not give me a mention. Grrrrrrr). Plenty of marks on my magnetic protector but the table underneath is perfect as new. No 2. Hate my glasses. Bought the work light/magnifier and wow what a difference, I agree with you completely. No 1. In the UK my supplier has told me if I attach a foot pedal the 3 year warranty will be void?!?! Not sure what to say on that one. As the scroll saw was expensive I will have to live without a foot pedal, just in case. No 11. I forgot why I added this on my watch list but now I remember so will get it bought. Thanks Kenny :O)
I can't imagine a manufacturer stating that a foot pedal would void the warranty. It is no different than flicking the saw's switch on and off. It is a normally open switch, not a speed control. I could see them voiding it for a speed control but honestly, they would have no idea that you were using a foot pedal as it serves the same purpose and function as their factory switch. I like your idea of the magnetic table cover with the zero clearance type hole in it. I may have to look around for magnetic material and see if I can't make one of my own. Don't worry though, if it makes the show, I will be sure to mention you. ;) Thanks for tuning in this week. I'm glad that you enjoyed the show and I hope that if you won't risk voiding your warranty, then you will keep an eye on the date of its expiry so that you can add one to your saw. You're gonna love it.
That's exactly the sort of thing I was thinking about @@Jetsetscotty . Now I just have to find a supplier of it around my area. Thanks for the suggestion.
It's hard to make plans for something like this Jim as each saw is completely different. This one was custom fit for this particular saw stand. I hope you are able to make yourself some storage drawers for your saw however. Thanks for tuning in.
Glad to hear that you found it to be helpful Kathy. If you have any questions along the way, please don't hesitate to ask. I'd be more than happy to help if I can. Thanks for tuning in to the show.
It's difficult to supply links Rita as not all accessories are compatible with all scroll saws. Amazon can be your friend in this case as to locating the accessories. As for your quilting magnifier, you can most definitely use it on your scroll saw. Depending on the scroll saw you have, you may want to clamp it to something other than your work table to avoid the saw's vibrations affecting the position of the magnifier. I hope this helps. Thanks for tuning in.
I have a magfier. It has been a big help for weeding cut vinyl so I will for sure using it when I start using my new scroll saw. It;s also a light. need to get a foot pedal. I see most people remove the presser foot. I think I'll be too nervous to use it without. Any advise on that? I got the ryobi.
I actually recommend keeping the hold down foot in place while you are learning. It assists you in holding your stock down to the table and lets you concentrate on your control of the cut. While you still have to hold the stock down even with the hold down foot in place, you don't have to apply hardly as much pressure to do it. Don't worry about what others do Janine. You do what you are comfortable with. That's the best way to learn. If keeping the hold down foot in place make you more comfortable and confident to learn scrolling, then by all means, leave it where it is. After all, those that remove it (myself included) are actually removing a safety feature of the saw. I just prefer to get my fingers a little closer to the blade and the hold down foot prevents me from doing that. I hope this helps. Thanks for tuning in to the show and for chiming in with your thoughts. Please feel free to ask any other questions you might have.
My brand of magnifying light on the scroll saw is a Craftex Paul. Unfortunately, this model is no longer in production. I also have this one from Lee Valley which I really like as well. www.leevalley.com/en-ca/shop/home/lighting/worklights/76037-led-magnifying-bench-lamp?item=17J3030 I hope this helps. Thanks for tuning in to the show.
re SQUARING THE TABLE, IMHO there is no need for a 2" square and its minuscule cost. To check the square of the table to the blade just take a piece of scrap wood and slide it gently onto the blade so it makes a mark. Then turn the wood over and make a second blade mark next to the first one. If the table is square with the blade the cut lines will be parallel. If the table is tilted the lines will be closer at one end than at the other end. All at the cost of a piece of scrap wood. :)
All of these accessories are merely suggestions Greg and it is up to the individual user to decide if they are the right thing for them or not. There is always more than one way to do things in woodworking and that's the great thing about the craft. Thanks for chiming in with a tool free way to check your blade for square. I'm sure there are many of viewers who will greatly appreciate the information. Thanks for tuning in to the show.
I'm eagree with you. Naw ı dont have a scroll saw machine, try to DIY, done with the control pedal, it is run but has lots of bad balance. I think buy e cheep one to start do sometings. Thanks for ideas. Salute from Turkey 🖐️
I am borrowing my wife's channel for this comment. I have been scrolling for about 15 years and make use of a lighted magnifier. I first tried a plastic molded lens & it wasn't good. Very small viewing spot. I had the opportunity to attend a Judy Gale Robert's Intarsia class where she used ground glass optic on her saws. Huge difference and worth the extra money.
That's some pretty good advice. I've never had an issue with the magnifier that I have but then again, it is a larger surface area. Maybe that makes a difference. Thanks for tuning in to the show and taking the time to chime in with what you have learned from others. Judy Gale Robert is a very well established and respected Intarsia artist so I think we can take her advice seriously. Thanks for sharing with us.
Hi bud, can you not just mill out the hole to accommodate the sanding sticks ?? Have to agree that the foot switch has to be No.1. I'm just starting out and thinking that I WILL break a blade or 2 and this will definitely make things less stressful and dangerous to me or the machine. Cheers for all you great tips.
Milling anything on the saw would change the geometry of the mechanism and is definitely not recommended. You can pretty much prepare yourself that you WILL break multiple blades while learning the craft and it is nothing to worry about. Blades are a consumable with scroll saw work and you will go through many of them through the course of your scrolling adventures. Glad that you are enjoying the shows. Thanks for tuning in.
Great top 10 my fellow 50+er. Is that the same mag/light as the Lee Valley? Any issues? I'm new to scrolling with my $150 Craigslist Dewalt, cha-ching! Enought money left over to pimp my ride, lol.
That magnifier light was actually sold by a company called Busy Bee Tools and has since been discontinued. So the only issue is that it is no longer available. It's been awesome since I purchase it many years ago. As for the Lee Valley light, I have that one also on my bench and it's been fantastic as well with no issues. I hope this helps. Thanks for tuning in.
About the sanding strips.... over the years I've found that the 1" section of the sanding strips that actually sands doesn't last long. Cost wise, they are VERY cost ineffective. Better to just cut pieces of sandpaper or pick up a set of tiny files from Harbor Freight for about $2, they have lasted 8 years and show no wear at all...... and, speaking of Harbor Freight, my lighted magnifier lamp from them, about $30 has also lasted years and still going strong.....Loved the video though, keep them coming....
Having only used the strip sporadically, I can't say for certain of their longevity. Thanks for chiming in with some hands on experience. We don't have Harbour Freight here in Canada, but we do have our equivalent to that. Thanks for tuning in to the show and for chiming in with your experience with the sanding strips and the magnified light. Glad to hear it's still going strong for you.
@@acutabove_woodworkings Canadian Tire? The handful of times I'd been in one of their stores I seem to recall them being much more than just a cheap tool store like our harbor freight however that's my guess. Not a canuck myself, although having lived my first 30 or so years in Michigan and the rest, so far, up here in Alaska, the CBC was no stranger to our television set (Sat. Nights especially). Couldn't ask for better neighbors than those of the Great White North.
@@girthbrooks39 Canadian Tire is a great, all round store where you can purchase pretty much anything. Their regular brand of tools (Mastercraft) can be good or bad, depending on the tool but they do offer a lifetime warranty so they have that going for them. Glad to hear that you had a Canadian connection. Thanks for chiming in with your story. I love it.
Dental picks. Man I got a set still in the pack..now they can come outta the pack. All great tips. Btw the focus out and in was a good effect for the subject...(although it did make me check my glasses lol). Nother good vid bud.Peace.
Quit mucking about on the computer and go open those darned dental picks man!!! LOL. Thanks for tuning in and for the kind words on the show. It's very much appreciated Dale.
pura vida mi amigo great video with a lot information ,could you made a video about how to cut aluminiun or brass with a scroll saw for a jelwery project? pura vida
The foot pedal would be something that you purchase. The pedal has a receptacle at the back that the saw plugs in to. Then the pedal plugs into a wall outlet. The pedal essentially now acts as a switch to turn the saw on and off. Here is a link to an example of one. www.amazon.ca/MLCS-9080-Billy-Switch-Deadman/dp/B000LJNJOE/ref=sr_1_8?keywords=foot+pedal&qid=1581479065&sr=8-8 Thanks for tuning in.
Thanks, very helpful. What about a dust blower or dust collection? Foot rest? My wife is about to get started scrolling, and I am trying to ensure she gets off on the right foot.
Glad that you found the show to be helpful Joe. Dust collection is a difficult thing on a scroll saw and for the most part, I have always had to fabricate my own form of dust collection while scrolling. I know the the Excalibur 21" came up with a scroll saw that had dust collection years ago but I can't say for sure if it works well or not. As for a foot rest, I'm not so sure that would be necessary but in the same context, it also couldn't hurt. The more comfortable you can be, the more you will enjoy scrolling. The list that I provide in the show is pretty much my top ten and then after that, the rest is a complete bonus. I would say a magnifying work light and a foot pedal switch are the two most important accessories for the beginner. Everything after that is gravy. Besides, you want to keep some things for birthdays, anniversaries, Christmas and that "just because" gift. LOL. Thanks for tuning in and please feel free to ask whatever questions that you, or your wife might have. I'd be more than happy the help if I can.
Glad to hear you are back to view the show again Leonard. As always, if you have any questions at all, please don't hesitate. Thanks for tuning in to the show sir.
The diameter of my lens is around 5" Paul but unfortunately it is no longer in production. It was purchase years ago at a store called Busy Bee Tools and they no longer carry that magnifier. This one here though www.amazon.ca/Magnifying-Veemagni-Stepless-Dimmable-Magnifier/dp/B09C1Y8774/ref=sr_1_7?crid=QEMVJDK9HLXR&keywords=magnifier+light&qid=1641425528&sprefix=magnifier+light%2Caps%2C114&sr=8-7 looks very similar to mine. I hope this helps. Thanks for tuning in to the show.
The magnifier that I have Lisa, is no longer in production. It was discontinued a few years ago. I do have another one that I really like though and you can find it here. www.leevalley.com/en-ca/shop/home/lighting/worklights/76037-led-magnifying-bench-lamp?item=17J3030 While its viewing area is smaller than my discontinued one, the view is clear, the magnification is great and the light is brilliant. I hope this helps. Thanks for tuning in.
5 times can be too much if you aren't used to it. I have a great one that is only 1.75 that I use on my bench and it's perfect. It's all about personal preference Dave and what suits you best. If you have good eyesight, you may not even need a magnifier but I find that a good starting point is the 1.75X magnification. I hope this helps. Thanks for tuning in to the show.
You're very welcome Leonard. Please feel free to ask any questions you might have along the way. I would be more than happy to help you out if I can. Thanks for tuning in to the show.
I believe it is a 1.75X and it works really well. This particular model has been discontinued which is disappointing but I also have another one that works equally well. www.leevalley.com/en-ca/shop/home/lighting/worklights/76037-led-magnifying-bench-lamp?item=17J3030 I hope this helps. Thanks for tuning in to the show.
Ken, Loved the video. I am new to scrolling and just ordered my first scroll saw (DW788). I was hoping you could give me the brand and model number of your lamp. I am 78 yo and know I will need some help in following the lines. Thank you, Charles
That's a little difficult to do as the model that I use has been discontinued and is no longer available. I do have another one that I use though that is just as good and I love it. Here's the link. www.leevalley.com/en-ca/shop/home/lighting/worklights/76037-led-magnifying-bench-lamp?item=17J3030 I hope this helps. Good luck on your scrolling. You've chosen a good saw. If you have any questions, please don't hesitate to ask. I'd be more than happy to help if I can.
A foot pedal, in my opinion Rafael, is an absolutely must. If you are looking for an Excalibur, you will most likely have to purchase one used as they are no longer manufactured. The are still made, using the same specifications, by King Canada and they are sold under the name Excelsior but the original Excalibur scroll saws are no longer made. Thanks for tuning in to the show and taking the time to leave a comment. I appreciate it.
Scroll saws are not well known for the their dust collection qualities Ebony. Currently, there is no dust collection on my scroll saw. Any good quality dust mask will serve you well while scrolling. Whether it be your normal disposable type that is worn in construction or a latex mask with filters, either one will work well for protecting you against the dust that a scroll saw creates. I hope this helps. Thanks for tuning in to the show.
what brand is the magnifying light? I have been searching for a 7 inch like yours as the 5 seem a bit too narrow and cannot find it for the life of me! You would probably make a bit of money if you put affiliate links in your description for your listed items. Great videos as I am new to scrolling. Your videos are a great resource! Thank you for sharing your knowledge!
The magnifying light was from a local tools supplier called Busy Bee Tools. Unfortunately, I believe they no longer carry it in their stock. Good luck with your magnifier search. If you ever have any questions, please don't hesitate to ask. Thank you for tuning in to the show.
Most definitely Daryl. While some might not think of a chair as an accessory, being comfortable while you scroll is just as important as the accessories that help you scroll. Thanks for tuning in and for chiming in with your thoughts. I appreciate it.
I don't really consider spray adhesive to be an accessory Nathan but more of a consumable. It's pretty much a necessity in order to get patterns attached to stock for cutting. Great suggestion though. Thanks for tuning in to the show.
I just bought a saw with stand and have a question. I like how the stand back leg is adjustable to have a good angle to work with but how do you square it away if its at an angle doesn't the saw have to level? How do you level the blade if base is angled??
The blade gets levelled or squared to the table top. If the table top is at an angle (which some are for comfort while sawing) then the blade will still get square to that "tilted" table. Anything below the table will have no effect on the squareness of the cut, as long as the blade is square to the table top work surface. I hope this helps. Thanks for tuning in to the show.
Of course. Scrolling is a great way to both create a project or enhance it. There are countless ways to enhance your scrolling. Chisels are a great way to do it as well as wood burning, power carvers, flocking, paint, etc. There's no limit to the projects as long as you use a bit of imagination and not be afraid to try something new. I hope this helps Lisa. I honestly hope that you do decide to venture into the scrolling world. It is, bar none, the most relaxing form of woodworking there is. Thanks for tuning in to the show.
Glad that you enjoyed the show Bryan. If you have any questions, please don't hesitate and I would be more than happy to help you out if I can. Thanks for tuning in to the show.
Ken, do you have a suggestion on which light magnifier version to buy? I bought an led version and it's so bright it washed out the lines in trying to see.
That must be one really bright LED light to wash out the lines. Not knowing how bright the one you have is, it's hard to give a suggestion for one that is lower. I know that I have the magnifier from Lee Valley and really like it but I'm not sure it the brightness will do the same thing or not. I would suggestion trying to reduce the brightness of the one you have. Perhaps and parchment paper filter attached to the front of it will reduce the brightness a little. If you want to check out the one at lee valley, you can find it here. www.leevalley.com/en-ca/shop/home/lighting/worklights/76037-led-magnifying-bench-lamp?item=17J3030 Unfortunately, the one that I use on my scroll saw is no longer available. Thanks for tuning in Pat.
I know this video is older but I’m newer to the scroll saw and found this video very helpful. Could you tell me why the sanding blades can’t be used on interior cuts, how are those different than outside cuts? 2) you mention dentals picks being helpful for small interior cuts are you wrapping a piece of sanding paper around the tools first or are the tools used as small sanding pieces? Thanks in advance
In normal interior cuts, depending on how small they are, the sanding "blades" won't fit through the cut holes, therefore they can't be used. As for the dental picks, you can use them as a scraper to take away burrs with no sanding needed. You basically use their sharp edge to scrape away any imperfections. For the most part, if you choose the correct blade for the application you are trying to accomplish, sanding should be a minimal anyway. I hope this has helped KC. If you have any other questions, please don't hesitate to ask. I'd be more than happy to help if I can. Thanks for tuning in to the show.
Unfortunately Stephanie, that unit has been discontinued. I also have this one and it works really well also. Although the viewing area is a little smaller, it still works really well. www.leevalley.com/en-ca/shop/home/lighting/worklights/76037-led-magnifying-bench-lamp?item=17J3030 I hope this helps. Thanks for tuning in
Great video Kenny, i haven't got a Scroll Saw but if i did there are some good tips there for me. I'm a bit surprised that not on your list, you didn't include a good seat to sit on. I presume that doing Scroll work takes a while to do, so a nice seat to look after your butt and back would be a must for me. Barry (ENG)
While a comfortable seat is definitely a must, I wouldn't consider it in the top 10. It's might be number 13. LOL. Great suggestion Barry. Part of having success in the shop is the ability to be comfortable while doing it. Thanks for chiming in with the suggestion and for tuning in to the show.
Hi Kenny. Great tips. I am new to this craft and have recently bought a very basic scroll saw. The saw does not have a built in dust blower, and I now realise how important a feature this is. Do you have any suggestions (You may have covered this elsewhere) on making one. Great videos. Thank you.
Hi Julian. Thanks for contacting me. A small fan from an old computer can be hooked up to blow the dust away from your cutting, but it is a little bulky and cumbersome. A better solution would be a half decent air pump from an old fish tank. You can use the fish tank's air hose, with the pump to blow away the dust from your cutting. If you tape a piece of wire to the hose before attaching it to your scroll saw, you will be able to shape the hose and aim it where you need it. I hope this helps. Thanks for tuning in to the show and if you have any other questions, please don't hesitate to ask. I'd be more than happy to help if I can.