Тёмный

SCX24 - The "Apex-1" V2 Pro by Dinky RC. Box Opening, Full Build and Review! 

The Shop - Mini RC
Подписаться 10 тыс.
Просмотров 7 тыс.
50% 1

Time to build the "Apex-1" V2 Pro by Dinky RC! This awesome micro-sized 1/24th scale rock bouncer is designed for the enthusiast! Take your stock Axial SCX24, add some double barrel / tele-shocks and a tiny battery and turn it into an iconic off-road beast!
We do a full deep dive and build of this unique kit and hope you join us for this journey into a 1-of-a-kind crawler! Check below for all the parts we used in this build. Make sure you tell Dinky, The Shop - Mini RC sent ya!!!
#dinkyrc #apex-1 #rccrawler #24thScale #miniRC #rcrockcrawler #RCRockBouncer #Furitek
Dinky RC "Apex-1" V2 Pro: www.dinkyrc.com/collections/a...
The OD Transmission: s.click.aliexpress.com/e/_Dmz...
3Flow9RC RBSL: 3flow9rc.com/products/r-b-s-l...
Furitek Iguana: amzn.to/3kt8N0t
Furitek Chameleon: amzn.to/3YseNpv
or
Get the Combo: furitek.com/products/furitek-... or amzn.to/3ks6tqs
OGRC Axles: amzn.to/3FugutX
OGRC Drive Shaft: amzn.to/3WkXPaN
43mm Adjustable Aluminum Shock: amzn.to/3PvlcfG
Emax Servos: amzn.to/3hxz7FC
0:00 Intro
0:20 What’s In The Box
3:16 Ultimate Combo Vs Baseline Combo
4:32 What You Need
5:10 Parts Talk
7:30 Avenger Assemble!
13:28 Overdrive Transmission
13:55 Motors?
15:31 The Overdrive Transmission Discussion
18:39 Motor and Trans Install
20:51 Unscrewing Screws
21:33 The FCX24 Battery Fits!
22:28 Installing Links
26:00 Installing the Tube Frame
28:37 Front Shock Mount Blocks
31:08 Planning Electronics
37:20 Interior
39:32 Clean Wires
42:07 Testing Electronics
42:44 Shock Talk
48:45 Tire Talk
49:53 +4mm Axles
51:29 Double Barrel Shocks
1:02:14 Drive Shafts
1:08:56 Some Final Checks
1:10:24 Wheels and Tires Install
1:15:30 Lexan Panels
1:20:50 All Done!
1:23:51 To The Rocks!
Purchasing from these links really helps support the channel!!
We now have shirts and stuff! Find it all here: my-store-4267224.creator-spri...
Bench Gear:
AMIR 28 IN 1 Cordless Mini Power Precision Electric Screwdriver Set: amzn.to/3VIAD6i
The Sickest FIELD BENCH EVER - Turtle Laboratories Portable Hobby Workstation Work Bench: turtlelaboratories.com/produc...
Pro'sKit 900-015 Helping Hands Soldering Aid: amzn.to/3DkNkfx
Lifegoo Heat Insulation Silicone Repair Mat: amzn.to/3Luf44d
SCX24 Toolset: amzn.to/35mjXgh
ANBES Soldering Iron Kit, Upgraded 60W Adjustable Temperature Welding Tool: amzn.to/3u7Owjq
UNIWEIGH Gram Scale,200 gx0.01 g( 7.05 oz x 0.001 oz)Digital Pocket Scale: amzn.to/3u71oWT
Recording Gear:
Blue Yeti USB Mic: amzn.to/3J4Bnf4
Apple Lightning to USB3 Camera Adapter: amzn.to/3LvwaP6
Pasow USB A Male to A Female Extension Cable (50 Feet(15m)): amzn.to/3J4Bnf4
Camera Stand 1: Custom Built
Camera Stand 2: amzn.to/3wJszZH
Camera Stand 3: amzn.to/36wqwgZ
Camera Stand 4: amzn.to/36xhSib
70 LED Video Light with Adjustable Tripod Stand / Color Filters, Obeamiu 5600K USB Studio Lighting: amzn.to/3lK56Rq

Развлечения

Опубликовано:

 

22 май 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 28   
@rockwolfdesigns6384
@rockwolfdesigns6384 Год назад
Hell Yeah little Experimental Class rig. Good video. I love the long build videos
@TheShopMiniRC
@TheShopMiniRC Год назад
Thanks a ton for watching good sir!!
@arthurhood3182
@arthurhood3182 Год назад
yes this will be my go to video when I do my build. you do a great job explaining the step by step. thank you
@TheShopMiniRC
@TheShopMiniRC Год назад
Huge thanks. I hope it helps a ton. Be sure to let Dinky know how much you love his kit and that my video helped.
@jashandeep8412
@jashandeep8412 Год назад
Experimental class bud!
@TheShopMiniRC
@TheShopMiniRC Год назад
Thanks a ton for watchin!!!
@topplerc6617
@topplerc6617 Год назад
Sweet, see you figured the shocks and tires figured out!
@TheShopMiniRC
@TheShopMiniRC Год назад
Yep, Just took some tinkering and using the teleshocks like Dinky's site says.
@andrewrichey7374
@andrewrichey7374 Год назад
Super cool, I watch the whole build, appreciate you sharing
@TheShopMiniRC
@TheShopMiniRC Год назад
Thanks a ton for watching.
@micahandamyzastrow4910
@micahandamyzastrow4910 Год назад
Experimental Class
@TheShopMiniRC
@TheShopMiniRC Год назад
Thanks a ton for watching!
@TobyBurt
@TobyBurt Год назад
The injora oil filled shocks are a great idea but slightly out of optimal spec. Removing the plastic washer/spacer from the lower seal and using some thin shock oil allows good bound rebound adjustment without the binding that occurs (the oring/spacer/oring config creates too much friction against the shaft.). You will still need spacers though.
@TheShopMiniRC
@TheShopMiniRC Год назад
Good tip!!
@NikolaiOfTheJungle
@NikolaiOfTheJungle Год назад
Can you drop a link to the front OD tranny you purchased? I just purchased a UDIRC 1608 from AliExpress (first purchase with Ali) but I’m still a little skeptical about some of the stuff on there. Having a link and knowing you got one from there would help out if you have one, if not no worries. Thanks for the content as always. Dinky just keeps giving us truly remarkable parts. These build vids give so much more context to the amazing pictures on Dinky’s site for this chassis. Little things like your explanation of the Delrin and other printed plastics is super useful and things that you won’t get from most other people on here. I really appreciate that you share your expertise and all the great content!
@TheShopMiniRC
@TheShopMiniRC Год назад
Thanks a ton for watching. I am glad the video helped. Be sure to let Dinky know you enjoyed my video and found it helpful! Here is the link to the transmission I purchased. s.click.aliexpress.com/e/_Dmzs1CJ
@arthurhood3182
@arthurhood3182 Год назад
OMG must have ... LOL
@TheShopMiniRC
@TheShopMiniRC Год назад
It’s pretty awesome.
@carlreeves9762
@carlreeves9762 Год назад
I wonder if fms batteries would work?
@TheShopMiniRC
@TheShopMiniRC Год назад
They sure to. That’s what’s in it now.
@gibsonlife573
@gibsonlife573 Год назад
I like everything about this I don't understand though why are guys printing stuff so thin why not thicker and don't wait Harley nothing so why not go a little bit thicker like a 3 mm rail
@TheShopMiniRC
@TheShopMiniRC Год назад
It would be hard to keep the scale look in this one with printing it thicker.
@RRRCinc
@RRRCinc Год назад
Just because it's a tubed cage doesn't make it a rock bouncer
@garymiles4230
@garymiles4230 Год назад
What makes it one
@RRRCinc
@RRRCinc Год назад
@@garymiles4230 big power, driving like you stole it. better watch busted knuckles productions for a refresh
@TheShopMiniRC
@TheShopMiniRC Год назад
I get that. Rock Bouncer is less about the design of the chassis and more about going fast on rocks.
@RRRCinc
@RRRCinc Год назад
@@TheShopMiniRC your videos are still legit
@TheShopMiniRC
@TheShopMiniRC Год назад
@@RRRCinc huge thanks for the watch! Keep on watchin! I also appreciate you giving some knowledge in the comments, it helps everyone learn!
Далее
Помогаем маме уснуть
00:19
Просмотров 68 тыс.
SCX24 Transmission Upgrade: Injora Metal Transmission
13:18
SCX24 Indoor Crawler Course Build and Overview!
43:10
Просмотров 173 тыс.
The FX118 gets some Furitek Upgrades!!
1:26:15
Просмотров 3,7 тыс.
SCX24 Chassis Upgrade + More - Friday Night Live
2:59:12
14 мая 2024 г.
1:00
Просмотров 3,2 млн
Зубарев Женился! #зубарев
0:20
Просмотров 1,5 млн