SDG  

Glad to have found this channel (thanks to Martin). Like your approach, very practical.

Thanks Steve. It's a pleasure watching.

Cheers from Aotearoa NZ. Great attitude.

Nice work on the lens. Looking forward to the pic program. Quick thought on the construction, I think you use too much heatsink compound. You want to use just enough to smooth any uneven surface, but too much actually creates a barrier to heat transfer.

If you sand the the lens in a linear fashion instead of random orbital you can cause the light to be focused in a slightly ellipsoidal shape. Each scratch leaves a slight raised rib that acts as a lens magnifying the light perpendicular to the direction of the scratches. We use diffusion gels similar to this in theater lighting all the time.

Thanks 👍🙏🇮🇩

Can you please tell us where you got the aluminum cases with the lens you called downlighter...possibly a link.

When something is difficult to solder, use flux. Anybody who solders regularly should have it. It's easy to use and it helps a lot.

Hi, you have done a great job! Could you suggest me a driver to supply a single XHP 70.2 with 2 18650 series connected?

2:20 you're welcome

Hi just watched your video and i was wondering if these leds would be suitable for lighting the interior of model buildings on a model railway layout? If so could you let me know which type i should purchase please? Thanks Phil

Any ideas on how I can run just two of these “Led/smd Per Bulb 194 T10 T5 Wedge Base Cool White 12v Dc 1407ww” bulbs off maybe a old cell phone changer or a 120 v to 600ma power supply I have, or what I need to run these two bulbs from 120 v plug? I want to run just 2 and make them be low voltage from 120 v. What I'm trying to do is come up with a setup for 2 front porch led lights I made for a kids outdoor playhouse. I'd be starting in the house with 120v then running low voltage wire to the playhouse. Any suggestions? PS any kind of led would be fine don't need much light just for looks.

Great! I use 42ah 3,2v lithium battery for many parallel connected leds, do i need a led driver?

Great video, very informative! Could you include the link to the places where you purchased every item you're using. so all we have to do is click on the link and we can buy them as well. Thanks again for the Great content!

Tnx it is awesome!!! Can i ask a video about making grow light?! Something like 10 x power LED (1w) and LED Driver (9-12)x1W

Would you be able to point me in the direction of a dimmer/driver? I basically have 10 x 3w beads 3.2-4.0v 750mA (max) on one chain and again another 4 white 3W beads with 3 x blue 3.2-4.0v 750mA (max) and 3 x 3w red 2.2-2.8v 800mA (max) on another I'd like a driver and dimmer (x2) for each series. This is for indoors, so will be wanting an AC (240) input. Any advice appreciated.

Isn't that Dow Corning paste the same stuff Intel puts under their CPU lids?

Great video.just subscribed.can u do a cheap x4 cxb3590 cob grow light build using and explaining how to wire the driver.that would be a great video.just my opinion.

Dear Sir,If you don't mind can you help me in building a led light with 1 watt and 3 watt leds for an planted aquarium. I want to use cool white and blue leds both. Want to know what resistors should be used and what power supply to use

Hello , can I power these LEDs with a pc power supply?

Need advice. I plan to use 3W 20 red 2,2V and 10 blue 3,6V LEDS, all 700mA. What kind of driver I could use and maybe I can DIY from other devices?

Would you think a 3W LED with 750 forward current, 3.6V voltage could be ran with a 5V 1Amp battery? I only need random flashes, not continuous light.

I need your help 1 have 6 nos. 1watt 350mA CC led light Plz help me to calculate driver size and how i have to connect this led to driver .. i have to take 1 driver for 6 leds

between the LED and the plate you have to put the thermal paste?

Please smile! ☺

Where can I find that reflector and housing. Thank you so much.

hi i have 5w uv led n i need 12 of this leds in series and the each led consume 3.4-3.8 v wit 1400ma can u suggest any driver or resistor setup as im using resistor but it get hot wit 12v power supply n this uv box need to run at least 8hours per day

Man for the life of me I can't figure it out. I want to power a 3 watt star LED replacement for my microscope on a dimmer switch. I want to use a regular 12 volt input, not the 5 volt original. Can I buy something to achieve this ?

Hi This 3W LED I want to connect to 12V, how many Ohom resistor I need?

never seen a 50 fps video coolio

hi sir I need help.how to making 1w led 13 blu in 15v adapter i power plz help me sir

Hi! Where i buy the lens?i'm brazilian

Sir may I ask what led adapter you use?

Where did you get that case for the led?

What’s referred to as wet & dry?

Hi sir 3w Star LED 3 light serious resistor value

Hai, please suggest me the proper driver to connect 2nos 3w led to 12v dc supply I would like to modify my vehicle break lamp and the voltage source will be the 12v car battery. Spec of led are 2.2 to 2.4 v and 700ma for red And 3.2 to 3.4 and 700ma for White. Can i connect 2 LED parallel to a 3w driver with an out put of 700 ma? Please suggest me the proper driver to connect two 3w led parallel or series. Thanks and regards Anuraj

Good morning SDG. I have the same led lights. I have a total of 39 led lights in series, they are 3w each. Can you direct me to a proper led driver to power them thank you.

Sorry i meant to add that these are what the model manufacturers use but they are quite hard to get hold of in the UK www.faller.de/App/WebObjects/XSeMIPS.woa/cms/page/pid.14.17.91/agid.1115/atid.15928/ecm.at/Lighting-fixture-LED-warm-white.html

what is the case name? does it also function as an heatsink?

I got a question any one could answer it what is the limit of how many led can be put together on usb I will have 2 in series with some low resister but how many can I chain together in parallel what number am I looking for here sorry for my ignorance

where u live i live usa

Hi SDG Electronics, i have 2 X 3W LEDs and i have USB mobile charger, how many and how much capacity resistors need...?

If you provide me a blue print of a few leds will be really grateful. I want to power 18 cool white leds, 6 blue leds. Please provide me blue print of both 3 watt and 1 watt led.

Now I know whos responsible for that damn robot voice shitbags use... Thanks guy...