Fantastic results! Thanks for the tutorial! Can you list some of the settings youve used while capturing? I have tried unsuccessfully attempted to capture meteor scatter recently using sdr# and im hoping to work out my errors before the perseids
Thanks for watching Jason! Meteor Scatter can be very tricky beyond the software settings. The big killer of Ms is a high noise level, it seems. If you have the ability to get an antenna out in the open, away from sources of RF noise (buildings, electronics, power lines, etc.) that really helps. A directional antenna and sensitive receiver are also important. My setup for this video is an Innovantenna 10 element FM beam and an AirSpy HF+ SDR. The antenna is about 10-15 meters from my home and pointed into unoccupied land, which helps with noise. Regarding software settings in SDR Console, check out Episode 2 in the series and Episode 5 on the Data Analyzer, if you haven't already. Good luck!
Hi there. I am not familiar with the RTL Dongles myself, and every radio has a bit of a different process to get working with SDR Console. I touched on this in Episode 1 of the series. A good place to look or inquire though would be the "groups.io" site for SDR Console. (sdr-radio.groups.io)