No video :(

Sealing and Mounting Transom Replacement for my 12 Ft Aluminum Jon Boat

Подписаться 58 тыс.

Просмотров 65 тыс.

50% 1

CHAPTER 2-
=Sealing and Mounting the Transom for my 12 Ft Aluminum Jon Boat=
This is the second video for the new jon boat to bass boat build I am doing. In this video I will be sealing and mounting transom. I seal the transom in fiberglass resin and then mount it permanently into the 12 ft aluminum jon boat. I'll show you the wood prepping process before laying down the resin to seal and waterproof the transom. I'll perform prep work on the aluminum, then carefully glue and bolt the new transom replacement into place. Of course I will include details step by step through the process and all tools and materials needed to perform the task at hand on this jon boat project.
This is a continuing series documenting the build process of my new 12 ft jon boat project which will be a portable, trailerless, fishing boat. Whether you follow along to learn something or help with your jon boat project or just enjoy watching me on my boat project, hopefully you enjoy and can take something away from this process!
New videos coming every week documenting this ful build so stay tuned! Subscribe here and follow the build on Instagram: Adubjones .
MAY YOUR TINY BOAT BUILDS BE GREAT!!!

Опубликовано:

23 окт 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 49

@devinxtodd 7 дней назад

I pass that sign every day

@stevenmorris2293 4 года назад

Keep us posted on the process. Thank you

@tripplebeards3427 6 месяцев назад

Nice job. I probably wouldn’t of glued the wood to the back of the aluminum though for the next guy so it’s not so hard to take apart.

@mikemills2420 4 года назад

Way to GO !!!

@AnthonyJonesBrigadeBoats 4 года назад

Thanks man

@ensidetheshop9475 4 года назад

Looking good bro!

@AnthonyJonesBrigadeBoats 4 года назад

Thanks cuzin

@jerrykolberg6046 2 года назад

Enjoyed you know your stuff thanks

@AnthonyJonesBrigadeBoats 2 года назад

Appreciate you

@derekwiggs4818 4 года назад

Good job man, it's always a little nerve racking drilling holes below the waterline. But that 5200 is the truth.

@AnthonyJonesBrigadeBoats 4 года назад

No doubt man, just gotta take your time with it!

@Palaciosjujitsu1 4 года назад

What type of adhesive glue did you use on rear board try to do the same here!

@WayneTheBoatGuy 3 года назад

I always wondered if it was ok to use stainless bolts on an aluminum boat.

@ryanpierson7233 4 года назад

Did you use 5200 to glue it to the aluminum?

@lukaswalker7825 4 года назад

How did you build the transom on the job top gun Jon boat? It just looks like metal there.

@AnthonyJonesBrigadeBoats 4 года назад

Same way as this. I left the original transom in tact and made a 1/2 inch cap and mounted it over the original. You can see pics on my Instagram. Its painted so it looks original but is not

@MailmanDownEDC 4 года назад

Awesome video!! So far, so good and your boat looks like it’s gonna turn out very nice!!! What grit sandpaper did you use to sand the aluminum transom before you mounted the wood? 120 like what you used to sand the wood after the resin cured?

@AnthonyJonesBrigadeBoats 4 года назад

Yeah 120 but you can use 60, 80, or 120. I like 120 because it doesn't scratch the aluminum too bad but removes the paint well enough. 60 might gauge it to where you'll see scratches after paint. In my case it didn't matter because it was getting covered up. Thanks , it came out great, looking forward to showing you guys the metalwork in the next video, that's where it starts to really take shape

@MailmanDownEDC 4 года назад

Thanks for the reply/info. 👍 Looking forward to your next video! By the way, were you able to check out my Jon Boat intro (Part 1 & Part 2) I uploaded on my Channel? Curious to know what process I would need to take in order to get that JB Weld/Epoxy stuff off the bottom of the boat.

@derekwiggs4818 4 года назад

@@MailmanDownEDC probably best to just sand it off, or if you get it cold enough chisel it off. I.e. dry ice on top of it.

@MailmanDownEDC 4 года назад

Derek Wiggs Thanks, Derek. Appreciate your suggestions. 👍👍

@AnthonyJonesBrigadeBoats 4 года назад

@@MailmanDownEDC I haven't yet, sorry I have a lot of stuff to catch up on, I will check it out though. I will be using wire wheels on my bottom of boat to get the stuff off the rivets before I di the epoxy coated bottom.

@CLTNY1 4 года назад

Do you think the ss bolts with the sealant would be watertight for the floor of my jon boat? I am going to put in a new transom and the factory one has a 45 degree support bracket going to the floor held with four rivets which probably will need to get removed to get the new wood in. I could permanently remove the support and seal up the four holes or put it back and use ss bolts. So wondering what you think?

@AnthonyJonesBrigadeBoats 4 года назад

I'd personally try to drill rivets out and go back w solid rivet in larger diameter. You could use a bolt though, id use nylon lock nuts and 3m 5200 around the head real good.

@CLTNY1 4 года назад

@@AnthonyJonesBrigadeBoats Thanks so much for the feedback. Will explore solid rivets. Was also thinking of closed end pop rivets but probably too weak. So either solid rivets or bolts.

@bullyakker 2 года назад

JB Water-weld works great. Pop a rivet into the hole and 'waterweld' it or get a $20 tube of 3M

@ayala1497 4 года назад

how long until the 3m 5200 can be painted after applying?

@jasonsmith4243 3 года назад

7 days

@southernstyle8636 Год назад

What size plywood

@benjaminsperry5562 4 года назад

How did you seal the the bolts so water doesn't leak through

@AnthonyJonesBrigadeBoats 4 года назад

It's in the video at the 10 min mark

@donjuan4113 4 года назад

Question how many chapters do you plan on doing

@AnthonyJonesBrigadeBoats 4 года назад

3 on the transom. I'm not leaving anything out. Too much footage to make one video and explain it all. How many chapters on the whole boat? As many as it takes.

@beebob1279 3 года назад

I'm curious. Was it a couple hours, A day for the resin to cure?

@AnthonyJonesBrigadeBoats 3 года назад

Depends on how much hardener you add. About an hr to a few hrs the way I mix

@silasbrooks2697 3 года назад

i realize Im pretty off topic but does anybody know a good site to stream newly released tv shows online ?

@kyriedarwin3703 3 года назад

@Silas Brooks lately I have been using flixzone. Just google for it =)

@diegoidris6738 3 года назад

@Kyrie Darwin yup, I've been watching on Flixzone for months myself :)

@silasbrooks2697 3 года назад

@Kyrie Darwin Thank you, I signed up and it seems like they got a lot of movies there :D I appreciate it !

@nicklausmisiti5204 Год назад

Why do u glue it to the boat? Wont that make it extremely hard to remove when it inevitably needs to be taken out?

@AnthonyJonesBrigadeBoats Год назад

I don't plan on removing any time in the next 20 years. By then the glue probably wont be doing its job. Transom wasthin and shot, wanted to glue to hold it and not have any air voids. Boats are a case by case basis.

@ryanrose7523 3 года назад

Cuz! how you making a whole new jon boat and not making your own cold brew coffee?

@AnthonyJonesBrigadeBoats 3 года назад

Cuz! I guess I need to get on some Diy cold brew coffee channels in my down time!

@richardtharp1608 Год назад

Clamp/bolt at the Bottom First Before you Clamp the Top.. The Bubble has Nowhere to Go if you Don't work it up Then Clamp the Top.. Thanks

@bassinrhodeisland4386 3 года назад

Couldn’t you just attach new wood and be on the way lol

@pablorivera6879 2 года назад

It would have worked like you recommend Bass, but this is Anthony Jones and he thinks about the future and by protecting it with the resin it gives the wood more life