Sealing the Seams with JB Water Weld

John Richter - Chest Freezer Cold Plunge

Подписаться 4,1 тыс.

Просмотров 25 тыс.

50% 1

This video shows how to mix the 2-part epoxy JB Water Weld and apply it to seal the seams of your chest freezer.
There is an introduction that talks about mixing, and video that shows it being applied to an actual chest freezer.
For details about preparation and other best practices for applying a two-part epoxy putty to seal the seams of your chest freezer cold plunge, see this page on my website:
chestfreezercoldplunge.com/jbww/
If you found this video to be helpful, consider buying JB Water Weld from my Amazon Affiliate links below. There is no additional charge to you and I earn a bit which helps support this channel.
3-Pack:
amzn.to/3qbhxbW
1-Pack:
amzn.to/3wr9qdd
Join my free Facebook group where we discuss DIY topics related to making DIY and professionally built cold plunges:
/ chestfreezercoldplunge
You can learn more about my book, consulting services, and recommended products on my website:
www.ChestFreezerColdPlunge.com
Feeling overwhelmed by the DIY route, or just don't have the interest or time?
If you have $5,000 - $8,000 in your budget (or can afford monthly payments of around $200), consider buy a commercially made cold plunge with a warranty. I've been using one of these since May of 2021 and can vouch for the quality of the product and the people behind the company.
I am an affiliate and happy to answer any questions about it. Search my channel for the review.
Here is a link and discount code for you.
plunge.pxf.io/MXjMRJ
CODE: RICHTER

Опубликовано:

19 июл 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 57

@Binze86 2 года назад

Thank you for showing this ❤️👍

@JohnRichterAustin 2 года назад

You're welcome

@tylerphotos Год назад

Very helpful, thank you!

@JohnRichterAustin Год назад

You're welcome!

@jesset55 2 года назад

Great helpful video however some things were not included such as preparation (sanding, vacuuming, cleaning with acetone), and the type of gloves that are best to use (nitrile with water to avoid sticking).

@JohnRichterAustin 2 года назад

I made these videos a long time before I started thinking about widely sharing them. Yes, a few steps are left out of the video - however, that is why I provided a link the video description that fills in those details and provides other videos to watch. Check it out and let me know if anything needs to be added to this page: chestfreezercoldplunge.com/jbww/

@spencerbjones81 Год назад

Love your content. If the JB weld is done correctly do you still recommend a pond liner paint? How long does the jb weld last if applied correctly?

@JohnRichterAustin Год назад

Renob81 - thanks! If applied correctly, JBWW will likely outlast your chest freezer. The best practice for all chest freezers is to have a liner to protect the floor and walls. If you are in my Facebook group, check out the files section for comparison of the for recommended liner options. If you're not in my Facebook group, there is a link to join in the description of the video.

@djbeachkng8931 Год назад

Been following for a while now and I have to ask: what are the consequences of not doing the pond shield? Let's say I just do the JBWW to seal. I understand this isn't a great long-term solution but is it mainly rust that will build up on the sides?

@JohnRichterAustin Год назад

Not installing a liner of some kind will result in a shorter life-span of the chest freezer, whether it has a bare metal or white enamel interior. When rust and corrosion starts, it tends to get worse over time, and if not addressed can result in leaks and a dead chest freezer. Having to drain the tub and deal with rust, corrosion and leaks will ultimately take more time and money than just doing it right the first time. However, if you only want a short-term solution and have it in your budget to repair or replace the chest freezer when it dies, you don't have to install a liner.

@russelldobos8515 Год назад

Just curious as to why you sealed areas the didn't appear to have a seam. It looked like you had JBWW at the top rounded edge of the compressor covering. Was there a seam there? Mine is rounded and I only have a seam at the bottom edge of the compressor and the sides.

@JohnRichterAustin Год назад

Different chest freezers are designed differently and have seams in different locations. Some have a seam on all sides of the compressor cover, some at the top and sides only, and some on the bottom and sides only. Some chest freezers have on vertical seam, others two or three. It might be difficult to see in the video, but if I'm putting applying JBWW it's definitely over a seam. :)

@freespirit6369 Год назад

Hello John.. Is it OK to apply a new layer over an already dried one (that is covered with mold) and in general, can you apply a new one over a dried one? or you have to peel it and do it all over again? (I hope not!) Thanks!

@zwuuuuu 3 месяца назад

same q

@BrandonCLong Год назад

If I applied the jb water weld without mixing it correctly, Can I remove it and then mix it again? Or should I just get new tubes?

@JohnRichterAustin Год назад

Any putty that was not mixed correctly must be completely removed and discarded. Sand again and clean with acetone and reply completely brand new putty.

@freespirit6369 2 года назад

Do you know where can i get the Inkbird device for European plug? (220v) Thanks.

@JohnRichterAustin 2 года назад

Search your local Amazon. I have an affiliate link, but not sure if it works in the UK: amzn.to/3DF2A6h

@johndecola 10 месяцев назад

Can I apply the epoxy pond liner over seams that have already used silicone on? Additionally can I apply JB Water Weld over the seams that have been siliconed? Thanks John

@JohnRichterAustin 10 месяцев назад

No to both. See the articles on my website about sealing the seams, liner options, and Pond Shield.

@freespirit6369 Год назад

should you seal the drainage hole? (it has a plug)

@JohnRichterAustin Год назад

Yes, see this article: chestfreezercoldplunge.com/sealing

@thatkidcruz4189 11 месяцев назад

If I'm using a liner you recommend, do you still need to seal the seams with the JB weld or can I use a marine grade silicone?

@JohnRichterAustin 11 месяцев назад

Which liner? If you are using a permanent liner such as Pond Shield, you need to use a 2-part epoxy putty like JB Water Weld to seal the seams. If you are using a removable liner, then you can use either JBWW or a high quality silicone or marine adhesive such as 3m marine 5200.

@marcosv935 2 года назад

What is the best way to seal the drain plug?

@JohnRichterAustin 2 года назад

From the inside of the chest freezer I stuff the drain with as much JB water weld as needed to go down about half an inch, insert the drain plug, and completely cover the plug overlapping JBWW onto the floor at least one half inch around the plug. Do not seal the exterior plug on the front wall- it is your early warning system if there is a leak.

@freespirit6369 Год назад

can you help with amount? how many tubes of "waterweld" do i need for 140X75X50 chest freezer? Thanks.

@JohnRichterAustin Год назад

You're welcome! See this post for your answer: chestfreezercoldplunge.com/sealing

@freespirit6369 2 года назад

Hello.. wonder if you can help.. I'm from Israel and I can only find here a metal interior chest freezer... Is there a way to cover the metal? or is it still OK to use if it's metal? what can you suggest with this type of situation? Thank you so much!

@JohnRichterAustin 2 года назад

Yes you can use a chest freezer with a metal interior - however, it needs a liner of some kind if you want to avoid problems with water corroding or causing rust. Join my FB group (see the link in the video info above) and check out the faq on my website for more info: ChestFreezerColdPlunge.com/faq

@freespirit6369 2 года назад

@@JohnRichterAustin can you tell me what type of liner? specific name? where can i find it? (can you please link it?) Thank you!

@JohnRichterAustin 2 года назад

@@freespirit6369 - read the FAQ with the link in my previous answer. It has that information.

@thepsychomarley4217 Год назад

It looks great, but, can i weld the freezer instead of sealing it ???

@JohnRichterAustin Год назад

I'm not a welder, but I don't think the materials - especially the foam insulation - would hold up. On top of that, the seams often have large gaps that I suspect would not be suitable for welding.

@thepsychomarley4217 Год назад

@@JohnRichterAustin thank you very mucho for your answer and help, you are right, it is not possible to weld the freezer because of the materials, so i am going to seal it today 🥳🥳🥳

@klajdistari827 10 месяцев назад

Hi, how many tubes of jb water weld did you use ? I have 10 cu ft freezer. Thnk you

@JohnRichterAustin 10 месяцев назад

See this article: ChestFreezerColdPlunge.com/sealing

@zorandomazet8875 11 месяцев назад

Can I do JB waterweld and have the shop do liner Line X or Rhino over it? Most shops are using a silicone based caulk but I wanted to see if JB Waterweld would be a better solution.

@zactastic4life 4 месяца назад

hey what did you end up doing? line x or rhino?

@zorandomazet8875 4 месяца назад

@@zactastic4life I went with Line X shop it was around $500 for the liner

@miguelangel6160 2 месяца назад

So if I buy your book on your website do I get the digital copie and a paper copie send to my home??

@JohnRichterAustin 2 месяца назад

The digital copy of my book is available on my website for immediate download (PDF). You're welcome to print one copy for personal use. If you prefer a hard copy mailed to you, it is available on Amazon. Your patronage helps me support our global cold plunge community- and my family- and is appreciated.

@user-ug2se5uz2q Год назад

hey @john do you recommend sealing the Defrost Water Drain in the bottom of the chest freezer? Mine is leaking out a lot of water?

@JohnRichterAustin Год назад

Yes.it is best practice to seal the drain

@user-ug2se5uz2q Год назад

@@JohnRichterAustin thank you so much for responding. in that case how do I clean / drain the water when needed? Do you recommend a water pump? Note: planning on installing a jed ozone generator.

@JohnRichterAustin Год назад

@user-ug2se5uz2q - use a submersible utility pumps to drain the water. 1/4 to 1/2 HP will work. If you buy a JED ozone generator from my website, I'll send you conolete instructions on how to set it up and run it for your cold plunge. chestfreezercoldplunge.com/product/jed303/

@wmwmw92 7 месяцев назад

Can i use silicone to fix chest freezer hole

@JohnRichterAustin 7 месяцев назад

Yes, but it will leak. Use JB Water Weld.

@miketownley6152 Год назад

If my freezer has a metal lining inside, can I still add Epsom salt or will it ruin the metal?

@JohnRichterAustin Год назад

Mike, If you chest freezer has a metal lining inside, water alone can cause it to corrode. Those aluminum walls are almost never pure aluminum, and water (and salts) will interact with the impurities. You should drain it and try it out immediately and plan for some kind of liner. If you're in my Facebook group, check out the files section for a comparison of the four recommended liner options. If you're not in my Facebook group, see the link and the video description to join.

@miketownley6152 Год назад

Thanks for the tip! Is there a spray solution that I can coat the entire thing with? Instead of a pond liner.

@JohnRichterAustin Год назад

@@miketownley6152 - You're welcome. You can have the pros do it for you at a Line-X shop, DIY with Pond Shield, or buy one of my custom liners. Here is info on Pond Shield chestfreezercoldplunge.com/pond-shield/ Here is info on the custom removeable liners that I offer: chestfreezercoldplunge.com/custom-liners

@JohnRichterAustin Год назад

@@miketownley6152 - see the faq on my website: ChestFreezerColdPlunge.com/faq

@castellum40 10 месяцев назад

Do you need gloves?

@JohnRichterAustin 10 месяцев назад

Absolutely yes, wear gloves.

@trophysucka Год назад

Does sikaflex 291 work as well as JB Weld ?

@JohnRichterAustin Год назад

We don't have much long term data on Sikaflex 291. If you use a removeable liner, it should be fine. With Pond Shield, a 2-part epoxy putty is required.