Self Leveling Floor Tips for Beginners

Подписаться 604 тыс.

Просмотров 2 млн

50% 1

See self leveling floor tips, specifically how to self level bathroom floors. If you're doing a bathroom remodel and need help, join our Platinum Membership and make your project easier at www.homerepairtutor.com/ 👍🏼
#selfleveling #bathroomfloor #homerepairtutor
0:00 Self leveling floor tips
0:20 How to use an angle grinder to remove thin-set mortar
1:23 How to use Ardex Feather Finish over wood subfloor
2:23 How to use Great Stuff expanding foam to seal bathroom floors
2:54 How to apply Ardex P51 primer to the wood subfloor
3:28 How to use silicone caulk to seal wood subfloor
4:23 How to mix self leveling underlayment
5:16 How to pour self leveler
These supplies were used in our video:
Fein WSG7-115 Angle Grinder
Ridgid Double Row Diamond Cup Wheel
Ironclad Gloves
Silica Dust Respirator
Fein Dust Shroud
Ironclad Gloves
Ardex Feather Finish
Drill
Small Mixing Paddle
Ardex P51 Primer
Great Stuff Expanding Foam
Silicone
Newborn GTD-930 Caulking Gun
Sill Seal
Stapler
Ardex K22F Self-Leveler
X01 Mixer (Collomix)
Dust Ex (Collowmix)
AQIX Water Dosing Device
Spiked Roller
Some product links may be Amazon affiliate links. As an Amazon Associate, we earn from qualifying purchases at no additional cost to you.
Want our newest DIY videos? Subscribe to our channel and hit the notification bell to see every upload. We upload new videos every Saturday.
Disclaimer:
Videos produced by Home Repair Tutor are provided for informational, educational, & entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. Home Repair Tutor does not make any claims of the safety of the projects, techniques, or resources listed on this site and will not take responsibility of what you do with the information provided by this site. Viewers must be aware by doing DIY projects on their homes they are doing it at their own risk and Home Repair Tutor cannot be held liable if they cause any damage to their homes. Home Repair Tutor cannot claim liability with all applicable laws, rules, codes and regulations for a project.

Хобби

Опубликовано:

26 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 562

@123Goldhunter11 2 года назад

I watched a lot of videos but when I saw the screws you drilled for height then it all made sense. No one else did that. Thanks.

@HomeRepairTutor 2 года назад

Thank you 🙏🏼

@gonzo1977 2 года назад

Same here. Good thinking there.

@robertgonzalez7745 2 года назад

@@HomeRepairTutor question about this. You covered all the joints and screws so that the self leveler is contained to the bathroom, but then drilled through it to mark the height needed. Doesn’t that defeat the purpose of sealing the screws?

@HomeRepairTutor 2 года назад

@@robertgonzalez7745 great question, I’d only use screws that don’t penetrate the subfloor but even if that happened wouldn’t be concerned as the screw is filling the hole. You could also use spacers and hot glue then to the floor 👍🏼

@chevyhighrider 2 года назад

No one except Sal ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-K47Dv8c0cA0.html

@nquiz2 28 дней назад

This is a great video. Aside from the straight forward, to the point explanation, one of the things I like the most...no background music!!!

@HomeRepairTutor 28 дней назад

🙏🙏🙏

@svensplooge9961 8 дней назад

@HomeRepairTutor u saved my butt man! I really needed to see this video. Thank u

@yodaguy6956 2 года назад

Awesome video. For future vids I'd recommend using the blue can spray foam designed for doors and windows, it has a lot less expansion than the regular foam. Newbies watching this could easily over apply the regular foam and have much more cleanup

@Ranger42 2 года назад

This was the most helpful instructional videos, in regards to self-leveling, I’ve yet to see. Thank you!

@Schnacks_Beat_Lab 2 года назад

Agreed. Watched about 10 so far and this one is so much better than any of those by far! 👍🏼 👍🏼

@shahnjordan7890 2 года назад

Hey mate I’ve been self levelling for years I wouldn’t say I’m a pro at it because it’s kind of the last resort to flood for the customer because it’s so expensive ($30m2) but I have done thousands of square metres of the stuff and I reckon your video is the best out there mate. Well done 👍🏼

@jkocaja1 2 года назад

Question. If adding screws to level, do the screws just stay in after it dries because the screws get covered by it? Have you ever used screws?

@shahnjordan7890 2 года назад

I’ve never used screws personally but I assume if they’re not completely covered you should screw them out

@themonkeydrunken 11 месяцев назад

@@jkocaja1 Yes, if you're using screws to establish your plane you'd leave them in place.

@themonkeydrunken 11 месяцев назад

@@shahnjordan7890 No, you wouldn't want to remove those screws -- that could fracture the SLU around them. We just leave them in place. Alternatively, pros often use tripods and of course you lift those away when you're done.

@jimsly1841 2 года назад

I've been doing this kind of work for years and I want to thank you for this video as I learned a thing or two. Great job.

@HomeRepairTutor 2 года назад

thank you, that means a lot to me 🙏🏼🔥🔥

@glassbazooka1645 2 года назад

@@HomeRepairTutor i

@robinshane4661 Год назад

Oh yeah, that helped. When we did our first floor, thankfully only a fireplace hearth, ours was WAAAAY to thick. Explains a lot. Thank you for helping out.

@thomaslafronz8445 Год назад

This video was great and to the point and definitely helped with my current job attempt. I purchased about $5k worth of epoxy flooring for my home from a company called Leggari and an ground area that used to be outside and now has a custom stone fireplace had a pitch to it for rain/runoff that needed to be leveled. This video helped a ton since this was the first time i've ventured this, so thank you. If I had to give any advice, take as much time as you need to prep and seal up all the perimeter with great stuff and/or caulk or whatever so as mentioned in this video, no self leveling mix will penetrate. Once the prep is sound, don't be afraid to make the mix wet and runny. If its not runny or thin enough it wont roll out as easy. Once your pour it, there's no doctoring it. Runny and thin will allow it to lay out in every crack and low spot. It may take longer to set but will be less work on the back end as far as feathering or grinding, etc.

@DaruDhillon 5 месяцев назад

Excellent video and tips! Be careful not to add extra water as it will weaken the self-leveller which can cause cracking. Like you say floor-levellers that are on the runny side are easier to level and smooth out.

@rogar61 Год назад

Love the suggestion for using screws as a guide for pouring the right amount of leveler.

@RoyCampanella44 2 года назад

Great video, Jeff. Love the off-label sill-seal trick. Thanks.

@HomeRepairTutor 2 года назад

thanks buddy 👍🏼

@mrharlemike28 Год назад

Perfection! Thank for all of the detail. It will be my first time applying self leveler and had no idea about all these steps. And I'm totally one of those ppl that thought self leveler 'levels itslelf.' 😅

@trendchamberlain8752 Год назад

I needed this, Thank you!!

@eddiem5040 2 года назад

One the best videos I've see on RU-vid on self level. 👌 great job on explaining everything especially PRIMER must be used on any type of floor for a proper bond.

@HomeRepairTutor 2 года назад

thank you 🙏🏼

@freightshayker 2 года назад

Thanks for the reminder on adding screws at different heights in order to double-check

@robinsonseff Год назад

Great video. Well explained. Thanks for sharing.

@pcm7315 2 года назад

Have no plans whatever to do this, but it still looked great watching the transformation.

@trueheritageinspections6354 Год назад

Did not know self leveler needed an expansion joint. Excellent video!

@jamienoonan1186 7 месяцев назад

Wow,. incredibly professional job. Well done 👍👍👍

@tedspens 2 года назад

I like that spiked roller. Great tips, Thanks! :)

@dianafield4250 5 месяцев назад

This is so great and so detailed! I hope I can manage it myself 😂

@BrooksBabies 2 года назад

Awesome tutorial. One thing, the spiked roller throws the leveling compound in the air, I noticed when it speckled my newly painted wall!

@thomo74 Год назад

Very helpful. Thanks !

@InspiredCraftsman 2 года назад

Great video, I've had great luck hooking up a dust deputy cyclone to my vacuum while grinding concrete. Keeps my hepa filter much cleaner.

@HomeRepairTutor 2 года назад

Awesome tip, is that the specific name of that product? Might have to get one 🙌🏼

@InspiredCraftsman 2 года назад

@@HomeRepairTutor yep, dust deputy cyclone. Also works great sanding drywall.

@jlh2119 Год назад

Loved the video! Thank you! Question … if after the first application of leveling compound has dried and there are still some low areas, is it ok to do a second application of leveler on top of the first? If so, would a different bonding agent be used (different than the original for plywood in my case?

@insurubagtr 3 месяца назад

You do really clean and solid work thanks for the tutorial feeling more confident i can do this myself !!

@HomeRepairTutor 3 месяца назад

Thank you 🙏🏼

@TheGuohua 3 года назад

"They just think that self-leveler is going to level itself." This is why reading the manual/directions/instructions is always important. You really can't ever assume anything or you're going to have a bad time.

@HomeRepairTutor 3 года назад

Always read the directions or call the company that makes the leveler to clarify questions. Ardex has one of the best technical support staff for products, I highly recommend using their products because of the support and outstanding product quality

@michaelmcgee2026 2 года назад

Yep. Doesn't matter if youve used a product 100x. It only takes one change to the directions to screw up a job. Always.read.directions.

@robertjames-life4768 4 месяца назад

The porcupine roller is a must tool for this. Worth the investment

@mistika72 2 года назад

Great video! Thanks!

@dallashill23 2 года назад

Thank you so much!!

@PhillyFixed 8 месяцев назад

Right to the point, thanks! Any thoughts on how the K 22 F product compares to Ardex Liquid Backerboard and when would you choose one over the other?

@TheChupacabra Год назад

Product maximalism to be sure

@rocktakesover 3 года назад

Love the screw trick

@ChristianChallis 4 месяца назад

Hi there, super informative. thanks a million.

@AlexanderEresov 2 года назад

Thanks mate, get good tip btw about dust extractor while mixing self-leveller. I couldn't find it in hw store, but printed some crude but functional substitute on my 3d printer.

@jackofall8617 2 месяца назад

I also just cut an edge of the bucket lid off, drill a hole to fit the shop vac hose and it does a decent job as well

@marks4399 11 месяцев назад

Thanks boss man! Great tips clearly laid out. Here I go!

@marks4399 11 месяцев назад

Thank-you. Did the job and it turned out beautiful! 60sqft +/- 1/16" from my set point. Only thing I added was I had 3 people with me mixing & carrying buckets. Done in half an hour. Again great tips!

@bahbarino4479 2 года назад

Wow! A lot of work, but seeing many self-leveling project fails, this is by far tops in reassurance of work done right 💪. Would recommend a vacuum wide blade attachment made for wet floor, has thin rubber blade for better water collection, but I use for both that though very effective for removal of finer dust particles as demonstrated in this video..

@TONYATTA 10 месяцев назад

Thank you

@medicwebber3037 7 дней назад

Wow, this was thorough! There were tips in here, well...perhaps I should say 'proper procedures', that weren't mentioned in other vids. THANK YOU!

@HomeRepairTutor 7 дней назад

Thank you 🙏 I enjoy the details. Glad you got some additional tips

@slaffkas 2 года назад

It would be also nice to cover of what can go wrong. As a first timer, I had one corner too high and some unevenness in spots, so I removed extra concrete at the corner and poured the second layer to even everything out.

@raincityjulia8406 Год назад

Good point! In my case, it was way too hot to do the job and the self leveler cured at lightning speed... creating a ton of work for me (I had to grind it all down, as it had formed little mountains all over)

@xochj 10 месяцев назад

Thank you!

@Pallidus_Rider 2 года назад

Video answered all my stupid questions. Bookmarked this video for future reference. 👍

@balastrade 2 года назад

Very handy thanks

@familypethealth 4 месяца назад

Well done! thanks for the helpful video. I am using this product to level the bottom of a pit in our floor to recess our pet scales!

@GoogleIT-qp7mk 4 месяца назад

You have some really cool tool setups

@FistandFootMartialArts 6 месяцев назад

BIG THX!!!

@collomix 3 года назад

Wow guys, great video! Excellent education and information as always. Love what you said about a dedicated mixing paddle for the job. Thanks for using our products and showing them to the world. Best and KEEP MIXING!

@HomeRepairTutor 3 года назад

thank you, both the Dust EX and AQIX are awesome tools, having a good mixer makes a huge difference with mortars and leveler 👍🏼🔥

@hazyandfriends9578 2 года назад

very good video thanks

@geza96 2 года назад

Great video thanks

@airlar4857 6 месяцев назад

"People think a self-leveler is just gonna level itself..." Gee, what would give them that idea?! 😂

@travhopkins 2 года назад

Love your videos and all the help you've provided, it's helped me a ton. How do you install the toilet flange now that the subfloor is wider than the flange (when the foam is removed). Thanks!

@brettpotter9900 2 года назад

You can put the flange down to the original floor depth, then use a jumbo, or two wax rings when you install the toilet if a regular wax ring isn’t thick enough. I think they make longer bolts too for securing the toilet. Hope that answers your question.

@alysonmosby4237 Год назад

Excellent video.

@mztawayne2561 Месяц назад

Great tutorial, thanks man!

@HomeRepairTutor Месяц назад

🙏🏼🙏🏼

@DachiaTheDogMom 7 месяцев назад

Ok, just to clarify- with a little back story- The guy at Menards, whom several people said knew what he was talking about, said to just leave the compound to level itself- that it was a mistake to futz with it. And yet you and several other youtubers are saying you kind of need to futz with it.

@SpainBlood001 2 года назад

enjoyed the vid. very detailed. ignore the haters 👍🏼

@mrmomo305 9 месяцев назад

Excellent

@kylehoyland 2 года назад

Really well done!

@HomeRepairTutor 2 года назад

Thank you buddy

@VOOODOOO37 Год назад

wow, you know your shit. I was going to just dump it on but now see there is much more involved.

@honestjohn6222 Год назад

Your a Good Tradesman Mate !

@nmssis Год назад

thanks for sharing this. Question: is there a reason why you did not attach the Sill Seal when you placed the Great Stuff?

@TheAlpine49 2 года назад

Fabulous!

@peytonhale1022 Год назад

“People think the self leveler is gonna level itself” 😂

@dejayajay Год назад

Use a spiked roller.

@sarcasmo57 2 года назад

I like the gray colour.

@adventureDad1976 Год назад

Great video my friend and thank you

@HomeRepairTutor Год назад

Thank you 🙏🏼

@VP411Designs Год назад

Awesome helpful video for diyers. Would you need to self level entire 2nd floor? If I am installing new LVL Lux Vinyl Lamanent flooring over the entire 2nd floor, would i need to self leveler over the entire floor using this method? If so then would this not be too heavy weight structurally speaking? Also will this Crack in the future?

@matteli1936 2 года назад

Great job wish my guys were this thorough on jobs lol.

@HomeRepairTutor 2 года назад

thank you 🙏🏼

@smateezic 2 года назад

I have just nick named you Cap'n Badass. Outstanding end product!

@onsetfx996 11 месяцев назад

Amazing!!

@colcol8288 2 года назад

So helpful! I have a very large room with lots of seams in the subfloor and slight dips and bumps throughout. How should I decide if I need to use self leveler over the whole room or use floor patch in different areas?

@Divine189 Год назад

Level the room if you want it flat. Patching will require more work/material/skill to create a flat surface.

@mohamadcanada7692 Год назад

Very good job .and how long I need to wait to set up my ceramic on that level on floor?

@ABRUSAHAELEKTRIK 3 года назад

Interesting

@georgiosladas3106 5 месяцев назад

Looks nice and smooth could someone use it as it? Or you have to put above extra tiles or wood?

@BrittanyGoldman Год назад

This is video is SO helpful. What should be done in the doorway into the bathroom? How do I prep that section to prevent the self leveler from flowing out of the doorway?

@HomeRepairTutor Год назад

You can add a 2x4 in the doorway and use the same methods that I used against the wall

@kmart6026 2 года назад

Wow what a great video

@CS2architecture Год назад

i really appreciate this very helpful video! I'm only grumbling from the fact that i may have to buy/rent tools that i'll seldomly use just for this project lol (like the squeegee & spiked roller). But that's the reality of DIY.

@dejayajay Год назад

After the job, sell them in Craig’s or similar.

@chadsichello4267 2 года назад

Great video, thanks for showing the full process. Only thing I would recommend is that you don’t need the great stuff AND the silicon around the base of the wall, the silicon alone is adequate. And in order to save on materials if you have the time, e.g. on a large floor area where you have 24 hours between floor prep and putting the leveler down, you can use an latex caulking with silicon in it. It takes longer to dry and seal, but is far cheaper and gets you the same result. If you don’t have the time, use a fast drying caulking with silicon (

@sgspec2 2 года назад

Lots of fancy gizmos in this video. All of my dust problems solved with a 10 dollar box fan in the window or with a 20x20 filter taped to it lol! I think he's sponsored by the brands he keeps name dropping even down to the caulk gun haha

@seekhimwithallyourheartand3358 2 года назад

Repent to Jesus Christ “However, if you suffer as a Christian, do not be ashamed, but praise God that you bear that name.” ‭‭1 Peter‬ ‭4:16‬ ‭NIV‬‬ J

@themonkeydrunken 11 месяцев назад

@@seekhimwithallyourheartand3358 This is irrelevant. Take that crap somewhere else.

@themonkeydrunken 11 месяцев назад

You're right -- Alex Plus or whatever's cheapest is good enough for the temporary job of holding the SLU back while it cures.

@borderlineiq 7 месяцев назад

@@themonkeydrunken Just keep reporting them to YT. They'll at least have to create new profiles.

@Participant616 2 года назад

If installing under floor heating mats, would you pour the self levelling compound onto the mat, or let it dry first and set the mat in tile adhesive?

@khalidanati8 8 месяцев назад

This is an awesome video

@mattyboombatty82 4 месяца назад

So.... Every step is super important? Got it 👍

@its__VP 10 месяцев назад

Anyone have any insights on how the prep changes if you have a concrete subfloor? I live in a high rise condo and am thinking of installing concrete floor (as opposed to laying new tile).

@giovanigiorgos2955 2 года назад

That was a great and very detailed video I probably would have cut a few steps but everything you listed was helpful.

@diesel104 11 месяцев назад

Man, you needed a lot of self leveler.

@redcloud870 9 месяцев назад

Great video. Thanks for sharing.

@michaelsa892 2 года назад

This is the first time seeing the screw trick do you leave the screws in or do you have to remove them before installing the flooring

@danyeldan2139 2 года назад

Great video and info but please I have a question I am removing my tub and walls and I want to install walk in shower base and new walls made by flexstone and they recommended to glue the base on wood subfloor and walls but they not recommended using shims for leveling the subfloor and if subfloor is not level do I need to use self leveling or any other way ? or Mortar ? and do I need to add wire mesh if I am using self leveling? please advice

@JosephErik83 2 года назад

I’ve got a basement I’m trying to put LVP down on. Unfortunately, about 30 square feet of it is covered with cement/glue type substance that was used for the old tiles. It is so hard that it broke a grinding tool I rented. Since I can’t remove it, hopefully this will work. Thanks.

@kaizersoze 5 месяцев назад

I've removed tiles with a jackhammer before. Way faster but you have to angel the jackhammer where you are holding its weight.

@ArkMedic1 3 года назад

What if you have 2 rooms that were combined into one, and one of concrete slabs is tad bit higher than the other one? There is a crack where the two slabs meet. Can you put a screw in the crack to make sure both slabs are the same height, and enough to fill in the crack?

@johnathanbarnes6796 2 года назад

you guys are the best

@HomeRepairTutor 2 года назад

thank you 🙏🏼

@djfunkyg 3 года назад

This is awesome - thanks! One quick question: I have a control cut running diagonally through the basement bathroom I'm working on and am nearly ready to put down self-leveler. What do I need to do to prep the control cut? I'm planning to mark the two walls where the cut runs and run my tile at that angle and will be putting down a HeatMatrix underlayment down (originally was going to do in-floor heating, but decided not to). Thanks in advance for any advice!

@HomeRepairTutor 3 года назад

Hey Gary, that’s a unique situation and I’m not familiar with HeatMatrix. So I recommend calling Ardex technical support to clarify your questions. They’re awesome and will do their best to help out

@seekhimwithallyourheartand3358 2 года назад

Repent to Jesus Christ “However, if you suffer as a Christian, do not be ashamed, but praise God that you bear that name.” ‭‭1 Peter‬ ‭4:16‬ ‭NIV‬‬

@themonkeydrunken 11 месяцев назад

@@seekhimwithallyourheartand3358 Dude this isn't the place for this crap.

@ryanmccue8180 7 месяцев назад

@themonkeydrunken it's not crap it's the truth

@mxg709 Год назад

Great video

@HomeRepairTutor Год назад

Thank you 🙏🏼

@rhdtv2002 3 года назад

It looked pretty level already

@jordanwingett Год назад

Great video, but why didn't you staple lath to the subfloor before pouring the levelling compound? Thanks.

@heathertowner5881 2 года назад

Do you pull the sill seal along the bottom out before tiling?

@framingvagrant 6 месяцев назад

That ardec is what I use it's perty good I'd say

@carlhughes1467 8 месяцев назад

If you’re applying LVP over the top of this, do you need an expansion joint in addition to the one made for the self leveler?

@breakingchris6889 Год назад

Would you use feather finish in a cracked concrete bathroom floor on a lower level? Or would an epoxy or another process be better?

@jonc222 4 месяца назад

Do you have any recommendations for doing this over heater wires, on plywood? I’m thinking the liquid BackerBoard which does not require lath is a good idea, but I’ve heard it is thick and doesn’t flow well.

@AidanSkoyles 3 года назад

Additional tips: buy more bags than you think you need. You do not want to have to make a run for more and then try to repour. Also this is a two man job for any DIYer. One to mix, one to pour/agitate, etc.

@AidanSkoyles 3 года назад

Another tip: Mapei brand from Lowe’s works fine. AND - this looks totally intimidating but is actually pretty easy and will provide great results.

@HomeRepairTutor 3 года назад

Totally agree, get an additional bag or two just in case

@andre1987eph 2 года назад

You are awesome.

@HomeRepairTutor 2 года назад

You rock!

@geo-ch6qz 2 года назад

Finally a video where trolls haven't said, "but you missed this, but you didn't do that, and you could've, would've, should've!". Lots to do in this video, it is not for first timers.