SENA, HOW TO PAIR, GPS,PHONE AND BLUETOOTH DEVICES, FACTORY RESET 

Sena Intercom Factory Reset and Pairing with Bluetooth devices
To factory reset Your Sena intercom system:
1. Turn Sena unit on by pressing Jog dial and Phone button together
2. Hold the Phone button for 10 Sec (you will see solid red light)
3. Press the Jog dial once you see the red light, Sena will factory reset.
Mobile Phone Pairing:
1. Hold phone button for 5 sec until you hear phone pairing (alternate Red/Blue led will flush)
2. Make sure you phone is in Bluetooth pairing select on your phone Sena under Bluetooth and you are done
3. Some phones will require PIN if needed it is 000
GPS Pairing
1. Tap Jog dial for 5 sec
2. With 2 sec of hearing intercom pairing tap the phone button once
3. You will hear 2nd mobile phone pairing
4. Again with 2 sec tap the phone button to hear GPS pairing (green light will indicate your device is discoverable)
5. Now you can select Sena on your GPS
Pairing non-Sena intercom Bluetooth such as Cardo you have to connect via 2nd phone pairing.
1. Hold the Jog dial for 5 sec (once you hear Intercom pairing)
2. Tap phone button once within 2 sec hear it say intercom pairing
3. You will hear 2nd mobile phone paring (blue led will flush indicating it is discoverable)
4. Now make sure your other non Sena intercom system is in discoverable mode and you are done.
Music: bensound.com
Thank You for watching please Subscribe Like and Comment below