SEPLOS Mobile 14.3KWh 51.2V 280Ah Lifepo4 Lithium Solar Battery System for Home Energy Storage 

This design does not compress the battery cells as required by 300 kg according to the datasheet. Because the back wall has a window 00:16, into which the middle of the batteries will be squeezed out. It was worth placing a partition between the 2 rows of batteries for better heat dissipation. On the top pressure plate, the stiffening ribs had to be extended to the edges to ensure that the plate was stiff enough to allow compression of the batteries. I'm ready to help you with design, it looks like you don't have good engineers :)

nice products

Very nice 😮

👍👍

Nice product

I am trying to find a seplos reseller in Europe but can't find any. I am looking to buy and install it in Greece

Is it available in Africa (kenya) & at what price...

You need to improve the design: it suffers in case you want to use this as a powerwall mounted on a stand or on a wall mount. Why ? Because you then would need to turn the battery upside down or make the back to the front cause in this case you need access to the backside with all the essential connections and of cause TURN ON and OFF and also what ? Reset button. Once mounted to the wall you will be screwed if the front would stay the front cause you would then need access to the back you will not have. So, redesign the case and offer a solution to reuse the display on the back or even maybe on the top, why don't you put it on the top with an option from which side it could be looked at with a readable display and not upside down of cause. We have ordered the L but were not aware of all the issues and implications that you will need a lot more space cause you need to be able to turn it around once it shows faults or errors and what not. It might also be a solution to use a shortened panel with the display to mount that on the front and if needed on the back and the shortened back panel on the front. Needs more flexibility and you can not hide behind the argument that it was designed as a battery on wheels. Good design is a different story and hard to achieve - at least if you look at apple designs or the microsoft surface series. And it was an obvious troublemaker cause the Mason rack shape battery has all connectors and displays mounted on just 1 surface, not 2 as seen here with important switches and functions hidden in the back like turn battery on and off.

Where is the cut off switch, and can you link two or more together?

I like to keep and store the cells UPRIGHT and not flat... there is some kind of fluid inside, and mind the gas release valve. Any opinions on this?

Vedo che non pressate le celle...a me hanno consigliato di pressare le celle per avere più durata...a chi devo credere?grazie di un vostro riscontro.