SERDI PROFILE - The Most ADVANCED Valve Seat Machine On The Market?

Подписаться 659 тыс.

Просмотров 76 тыс.

50% 1

Be Sure To Visit SERDI in Machinery Row Booth 5201 At PRI Show 2023 December 7th-9th!
‪@machinesserdi3318‬ recently invited me to their facility in North Carolina to learn all about their latest single point CNC valve seat machine, the SERDI PROFILE!
The PROFILE is the latest single point CNC Machine from Serdi. More than 10 years of experience in single point technology condensed into the most advanced machine on the market. Ease of use, speed and accuracy brought to a whole new level, leaving all competition behind. Extremely versatile machine appropriate for machining any kinds of cylinder heads, from small motorcycle to large stationary engine. It does it all.
Longer Form Technical Video: Coming Soon
Chapters:
00:00:00 Introduction
00:01:02 Introducing Renaud From France
00:01:26
Form Tool Vs. Single Point Cutting Inserts
00:02:08 Machine Axes Explanation
00:03:24 CNC Controlled Spindle Speed
00:03:59 Auto Balance Facing Head
00:04:47 Leveling The Cylinder Head
00:05:27 Hydraulic Collet For Pilot
00:06:14 Defining Cutting Tip Diameter
00:06:48 Describing A Seat Profile For A “Recut”
00:09:14 Programming Seat Diameter
00:09:34 Programming Machining Datas
00:10:45 Setting Centering Float Time
00:11:27 Seat “Touch Off”
00:13:46 Setting Z Offset
00:14:31 Simulating Tool Path
00:14:41 Cutting The First Seat!
00:15:49 Modifying The Programmed Profile
00:17:40 Increasing The Depth
00:19:09 Chip Guard
00:19:22 Comparing To Cutting On A Form Tool Machine
00:20:18 Valve Seat Runout Check
00:21:43 Cutting A More Complicated Profile
00:25:13 Slow-Mo Seat Cutting Action
00:25:29 Transitioning to Cutting Exhaust Seats
00:27:03 Programming & Cutting A Blank Seat Insert
00:31:29 Seat Counterbore Programming & Cutting
00:33:14 Measuring Counterbore & Setting Tool Wear Compensation
00:35:54 Recutting Seat Counterbore (Slow-Mo Action)
00:36:14 Verifying Seat Counterbore Diameter Accuracy
00:36:49 Counterbore Form Tool VS Single Point Comparison
00:37:09 Outro & PRI Show 2023 Invite

Авто/Мото

Опубликовано:

10 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 203

@JAMSIONLINE 7 месяцев назад

Be Sure To Visit SERDI in Machinery Row Booth 5201 At PRI Show 2023 December 7th-9th! Let us know if you’re going! The cleaning guy & I will be wandering around all week 😎

@thatguywillt 7 месяцев назад

I'll be there, crying over the machines I can't afford, lol.

@JAMSIONLINE 7 месяцев назад

This is the whole experience of PRI as a machinist or fabricator lol

@tomstrum6259 7 месяцев назад

Quite an Amazing flexable Machine but I don't know.....Lots of Math & many Key Strokes Required 😢 .....I Know I'm Not 100% accurate with any Keyboard Entries & Input entry do Happen.....I'm Not getting any younger & feels more More cut Risk errors prone compared to setting up a Known good Single multi-Angle cutter....

@countryracer69 7 месяцев назад

Looked for y'all at PRI. Was in the Serdi booth a couple times but missed ya.

@JAMSIONLINE 7 месяцев назад

Shoot! Sorry we missed you lol!

@fastindy 7 месяцев назад

Whenever someone says they're "kind of" an expert, you know you've found the right person. They know what they know, and they know there's always still more to learn.

@howlinhog 7 месяцев назад

Always wished I had went into automotive machine work. I'm 62 and have had a very productive nearly 45 years as a professional mechanic, and later as an Automatic Transmission shop owner operator. I've been using the same machinist for nearly that long. First the father and now the son.

@JohnH20111 7 месяцев назад

i can just imagine how much more cfm flow would be if the cylinder heads were fitted with race valves or severe duty valves

@mgmjferg89 7 месяцев назад

I would agree. I wish i had got into engine machining. I am in aircraft machining and would love to have access to the machines i need to get my ls3 block work done.

@jeffbear5317 7 месяцев назад

I'm 55 have been a professional mechanic since 1986 and remember grinding valve seats with a pilot in valve guide and stone attached to basically a big hand drill and that was considered high tech 😂😂

@ChrisHarding-lk3jj 5 месяцев назад

@@mgmjferg89If you want the absolute best machine work possible send your block to qmp racing in Chatsworth California.

@mariocooldude9092 5 месяцев назад

@jeffbear5317

@loganpe427 7 месяцев назад

Renaud's knowledge and use of English is impressive, especially given that it's a second language for him!

@JAMSIONLINE 7 месяцев назад

He was great to work with!

@jonasthemovie 7 месяцев назад

He knows a few english.

@Absaalookemensch 7 месяцев назад

Thank you Jim's and Serdi. Very informative.

@JAMSIONLINE 7 месяцев назад

Our pleasure!

@georgedreisch2662 7 месяцев назад

Coming from the age of grinding seats, myself, this left my head spinning.

@waynee.3244 7 месяцев назад

All your content is great, but when a multinational machine tool company reaches out to you based on the work they have seen you produce, it speaks volumes about your skill and dedication to the achievement of perfection.

@johnhoops3531 7 месяцев назад

Agreed. You are definitely very talented at your craft young man. Keep up the great work. Enjoy your content almost daily.

@pete540Z 7 месяцев назад

Using polar coordinates instead of cartesian coordinates makes perfect sense for this machine. Bravo, Serdi.

@Eytaris 7 месяцев назад

glad I'm not the only French viewer and it's nice that they are people in your industry, shoutout to Serdi Machines! :)

@thevenardaxel9926 7 месяцев назад

Non tu n’est clairement pas le seul👍

@waynerohde1036 7 месяцев назад

Alot of factories and metal shops in the US have French machines. I ran Amada break press and turret press

@TyphoonVstrom 7 месяцев назад

A huge advantage of using the single point insert on this machine will be virtually eliminating the chatter that you will get from the large cutting edge on a profile type insert.

@robbfisher2876 7 месяцев назад

That is insane! One tool and you can deshroud, cut the seat, and presumably match the bottom of the seat and port. So much possibilty!

@billrimmer5596 7 месяцев назад

Having a great RU-vid channel with hundreds of thousands of people enjoying your content is a huge factor on whether or not this becomes affordable. The cleaning guys hot rods and tractor generate a whole lot of interest!! The dyno series and build of the small block was a page turner. I mean video turner. The way they compliment each other is too cool!!

@kevinwalker4623 7 месяцев назад

Props to the Serdi Rep for having to deal with imperial and never skips a beat!

@cdnaudioguy 7 месяцев назад

That’s pretty amazing! Imagine being able to undercut to make the transition as smooth as possible. Bloody marvellous!

@jcnpresser 7 месяцев назад

Seems if your doing performance heads this is the next best thing since sliced bread!

@troydspain1099 7 месяцев назад

Never have to wait for a custom cutter ever again

@JAMSIONLINE 7 месяцев назад

Exactly! And when you find out you really wanted a 32° angle on that custom cutter instead of the 35° you ordered, you can change it on the fly instead of waiting all over again! lol

@jcnpresser 7 месяцев назад

And the price point on the cutters, you can probably get a pack of single point cutters it uses for the price of one special cutter I’d imagine.

@Moeandlife 7 месяцев назад

I'm glad that your hard work and talent are recognized

@Adrianzx 7 месяцев назад

this is now a cooking channel for metal machining

@slicedbread9003 7 месяцев назад

I didn't know that Serdi was French. I'm not surprised either. This is pretty neat. CNC has changed so much in machining.

@douro20 7 месяцев назад

Newen, the company which originally developed this technology, is also French. It was founded in 1992 by two former Serdi engineers.

@BerlietGBC 7 месяцев назад

What a incredible machine, I will link this to my friends in France 🇫🇷

@P51 7 месяцев назад

merci beacoup!

@andy347495 7 месяцев назад

wow, seems like a very valuable machine.

@travisfabel8040 7 месяцев назад

This machine is amazing. I wonder if it can do non-circular shapes by running the u-axis in and out depending upon the angle. If it can, it would be able to cut the valve guide and the head around the valve guide to blend into the valve... Perfectly accurately.

@rickfinsta2951 7 месяцев назад

I am not sure if this particular machine can do this but I heard a tech talk from one of the big names in Pro Stock several years back where they mentioned they were doing exactly that. IIRC, the presenter said that the seat has to transition into the throat which will be oblong, not round, so they used a single point cutter like this that made the top and main angles round but the throat angle transitioned to the runner shape slightly.

@paulsalvestrin7253 7 месяцев назад

Once you move to this type of machine you will never go back. I have been using the Newen cnc for around 10 years now and it is next level compared to anything else. It still takes an experienced operator to produce consistency. They cost a lot but the standard of work it produces is so much better. The only downside is the cutting cycle times are longer than a conventional machine.

@robr1656 3 месяца назад

Great videos. Lots of learning!

@scrotiemcboogerballs1981 7 месяцев назад

Thanks for sharing hope you guys had a great thanksgiving

@keithkamps77 5 месяцев назад

Way cool!!!!!!!!!!!!

@Tinman97301 7 месяцев назад

This is an amazing bit of kit

@tobiasbostwick9002 7 месяцев назад

Absolutely fascinating technology!

@patrickwendling6759 7 месяцев назад

Thank you for your knowledge and video's USA 🇺🇸

@lydonlafitte5573 7 месяцев назад

“Babe what’re you doing? Get off me, put your clothes back on.. Jamsionline has a new video out”

@user-hi2ev7ug4l 7 месяцев назад

Very nice piece of machinery....good content...thanks.

@gizmothewytchdoktor 7 месяцев назад

with that machine i can imagine a curved radius valve seat. machining valves to match. no abrupt transitions at the seat equals less turbulence equals smoother flow enabling faster air flow.

@mwrcrft 7 месяцев назад

That CNC machine is the right tool for production work and you need to batch out a run of heads.

@JAMSIONLINE 7 месяцев назад

On the flip side, I think it makes one off work easier as well! And you can save your program for the next time that style head arrives in 2 years!

@mwrcrft 7 месяцев назад

That is super nice to have , so what is the, "but" answer to not getting one of the new CNC machines then, other than affordability of your shop's budget?@@JAMSIONLINE

@JAMSIONLINE 7 месяцев назад

This machine was not on the market when we made our investment in early 2020. Had it been and had we known what I know about the machine now, it would have been a very serious consideration despite the increased cost over the Serdi 4.5 that we purchased. Either way, they're both fantastic machines. Serdi has a reputation for quality and our experience has been that they provide the customer service to match!

@yosmith1 7 месяцев назад

Great demo!

@JAMSIONLINE 7 месяцев назад

Thanks!

@stevenewman5117 7 месяцев назад

Come on Serdi, you should sponsor the guys a machine for content! 🏁 win win

@JAMSIONLINE 7 месяцев назад

🧐😏

@shanerorko8076 4 месяца назад

@32:00 the reason for the discrepancy is because the probe has swarf under it. It should have been desinged that it probes each hole before cutting then uses that probe measurement and cuts off that, so it doesn't use the probe while cutting. Unless I'm wrong and it only uses it as a first measurement.

@ldiver61 7 месяцев назад

that was impressive. now of only you had marked the seats so we could see the infinitesimal cuts being made. those chips were SMALL

@JAMSIONLINE 7 месяцев назад

Should’ve brought my Dykem lol

@tyrain20 7 месяцев назад

Video it self is nice but man over 50 adverts to watch it is insane. 😮

@curvs4me 7 месяцев назад

Dude! That's wicked. Can do the throat taper like using the sandpaper flap wheel before final cut on the seat. Like an infinite angle valve job.

@TheUlrikkaul 7 месяцев назад

A French guy doing messurement in Imperial!? Now thats a treat. Thanks for the video.

@dondorfman3951 5 месяцев назад

If a CNC machine was on my purchase list to be functionally value added it would have to cut an interpolated circle or ellipse or other offset throat shapes. This is just a programmable concentric seat cutter. Takes the place of form tools and will cut hard seats better without chatter. A good thing but I could not justify the cost based on just that feature or the skim cut features shown. Then there is the service aspect.. I can fix my S100 and still get parts. Having to call the factory when some electronic issue arises..

@stephenpoe2037 7 месяцев назад

WOW ! What a nice machine ? $$$$$$$ is all it takes !

@skylinefever 7 месяцев назад

In some videos, certain valve seat material were difficult to cut. I am thinking about how those valves seats could be better cut with this CNC machine.

@JAMSIONLINE 7 месяцев назад

Exactly! This machine would tackle hard seats no problem!

@Midnight_Rider96 7 месяцев назад

A form cutter has much more load to make a cut while the single point tool cuts effortlessly! Amazing

@dereklacey1 7 месяцев назад

I have no clue about all the technology but it was awesome watching.

@Kenny-1958 7 месяцев назад

Is this machine only for doing seats, so you would need to keep the older machine around for doing guides. Also if something goes wrong in the electronics, you would be setting dead in the water if you didnt have the older machine.

@Aleks_Mechanics 7 месяцев назад

Notification SQUAD!! Have a nice weekend!🔥🔥🔥

@JAMSIONLINE 7 месяцев назад

Same to you!

@Aleks_Mechanics 7 месяцев назад

@@JAMSIONLINEThank you!😄

@scotthultin7769 7 месяцев назад

132 👍's up thank you for sharing 😊

@JAMSIONLINE 7 месяцев назад

Thanks for watching!

@mikedaugharty5544 7 месяцев назад

Great video wonderful machine gotta take and do a lot of valve jobs to pay for it though that's the only problem great video

@djosbun 7 месяцев назад

Super-detailed videos like this are awesome. I’m curious how many professional racing organizations in the USA use Serdi machines? Must be at least 95% of them.

@allurared9029 7 месяцев назад

Hard to say, but I dont think there are thaaat many of these CNC serdis in use... I dont know how a shop could set up with this quality of equipment and turn a profit, thats a whole lot of valve jobs.

@TurboDog73TX 7 месяцев назад

What an awesome S&G machine, reminds Me of thr Newen single point machine, I'd be interested to see a head to head comparison of the features and benifits of each..

@shawnthomas7404 7 месяцев назад

I think Serdi bought Newen.

@douro20 7 месяцев назад

@@shawnthomas7404No, they are two different companies. Newen developed the technology first. They were actually founded in 1992 by two former Serdi engineers.

@MrRustyjackson 7 месяцев назад

I'm sticking with my Neway hand seat cutters! 🤣

@grembal. 7 месяцев назад

Used to work for Edelbrock and did the valve jobs for a few months, their Serdis are probably from the 90s and were in dire need of service but we still made it work somehow 😅. Wish we had this kind of stuff while I was there. We had some CNC Rottlers and got some training to set those up but they would always give us issues especially with runout...would have saved so much work if we were able to get it running properly, but in the end they ended up ditching them and they're slowly starting to add valve job cycles to their HAAS machines.

@ldnwholesale8552 7 месяцев назад

I have owned Edelbrock heads, a dyno session and ONE race meeting and all the seats were leaking and one bent valve. Dissaapointing on brand new roller cam race heads.

@grembal. 7 месяцев назад

@@ldnwholesale8552 They've had a reputation for selling bad heads that need work out of the box for a while and after working there for a couple years I am not at the least bit surprised. Leadership valued numbers over quality

@YooperICE Месяц назад

What hardness, Rockwell c. I’ve cut 66, more plunge and slide. And can it handle radius vs the simple angles on taper, seat and any reliefs.

@otterconnor942 7 месяцев назад

Means you can cut radiuses for valve seats, a very popular profile in aviation valves

@roncoburn7771 7 месяцев назад

dont no a whole about what he is talking about but I love this stuff

@denniss5512 7 месяцев назад

Surprised Steve Morris hasn't bought one of these yet. I bet Jackstand would buy one in a hot minute.

@bcbloc02 7 месяцев назад

Steve has a 5 axis doing his ports his setup is more advanced than this already.

@JAMSIONLINE 7 месяцев назад

He still cuts his seats on a Rottler form tool machine though! Porting & valve job are two different processes.

@andy347495 7 месяцев назад

it looks like you could eliminate the need to use bowl hogs also. the money amd time savings seems substantial.

@JAMSIONLINE 7 месяцев назад

Yep! The cutter can do everything from deshrouding to blending into the bowl in a single process!

@grahamrussell2038 7 месяцев назад

Yay first comment!

@georgew.5639 7 месяцев назад

Can the cnc machine copy the profile of a valve and cut the seat to exactly mimic the valve? Thus perhaps eliminating the need for lapping of the valve.

@MrJamesBanana 6 месяцев назад

This makes me realize that I'm not sure how we cut the valve seats at work. Maybe they are delivered pre-cut, that could explain why we have so many varieties, I will have to check next time i pass by the cylinder head line. I work at a factory building heavy duty diesel engines, which includes machining and assembly. We also do prototype work, so would not surprise me to find a machine like this on the prototype line.

@YooperICE Месяц назад

Either single point or plunge and slide depending.

@FiveStringCommando 7 месяцев назад

How’d you like North Carolina? NC is my old stomping grounds. If you get to go back anytime soon, have some Bojangles and don’t forget the BoBerry Biscuit for dessert. #LetsGoCanes

@JAMSIONLINE 7 месяцев назад

lol Cane’s is my jam but I did have Bojangles when I couldn’t find a Cane’s! It was pretty dang good but I missed the dessert! Hopefully Serdi will have me back sometime and I’ll try again lol I enjoyed it but there were too many trees 😂 I like being able to see for miles with the Rocky Mountains in the distance haha

@ellieprice363 7 месяцев назад

I live in Charlotte. Wheres the Serdi sales plant located?

@JAMSIONLINE 7 месяцев назад

Mooresville

@francisgravel6593 7 месяцев назад

Such a nice machine! Enough to make you sick Lol!

@user-kr9mh5oi1q 6 месяцев назад

It wasn't long ago when they said a 5 angle racing valve. How can you cut 5 angles in that little space?

@odl21 7 месяцев назад

Finally something that is better than stones.

@yeagermcbipper9008 7 месяцев назад

so for the cost of all this cnc goodness how many seats do you need to cut to pay for it? Does it speed things up that much to make you money? I don't care about the tech, I care about the cash flow.

@seitenryu6844 6 месяцев назад

Is the delivered weight of the new machine much different than the old? Seems like they they could get away with a lighter casting, since the loads are smaller. It shouldn't ever see heavy cuts by design.

@jmflournoy386 4 месяца назад

can I use all my existing cutters in the new machine?

@JSMCPN 5 месяцев назад

What if a piece of cutting debris gets stuck under the probe tip?

@ericsmcmahan 7 месяцев назад

@jamsionline what is the name of the micrometer used to measure the seat counterbores and do they make them that measure in thousandths?

@JAMSIONLINE 7 месяцев назад

If you look up "three point internal micrometer" you will see some different options. The Mitutoyo ones are called "holtest" micrometers I believe. They have standard sizes as well as digital. They're on my tool wish list as they're very handy, but they're also quite expensive lol.

@bertus76q 7 месяцев назад

very cool machine!! Getting one?

@JAMSIONLINE 7 месяцев назад

On the wish list lol

@raycollington4310 7 месяцев назад

Impressive machine. I can see the old school brigade thinking this is a bit OTT and that you need a lot of valve seat work to justify the investment.

@dangerrangerlstc 7 месяцев назад

That sure beats the old school stones i have in my home shop! Does the single point tool mean you can do undercuts too?

@JAMSIONLINE 7 месяцев назад

Yes! Venturi shapes are possible!

@W4BIN 7 месяцев назад

Wearing headphones (as my wife plays her piano) I heard a telephone ringing close to the end, dimly. Ron W4BIN

@firstnationsindian8062 7 месяцев назад

Same as the Newen contour.

@paulcooper9011 7 месяцев назад

A question springs to mind and 33:04 shows this best, I think. How does the machine handle swarf that gets between the probe and the deck? Especially if it continually references the probe.

@JAMSIONLINE 7 месяцев назад

The probe references once when you first move to that seat. It isn't constantly referencing during the cut if that makes sense.

@paulcooper9011 7 месяцев назад

@@JAMSIONLINE It does, thank you. From what was said in the video it seemed as if the machine was constantly referencing the probe every time it cut and the probe made contact with the deck.

@stephenboyd6378 6 месяцев назад

Hi! I just ran across a warning in the repair manual. It warned me not to stamp the rods to mark them with a marker. I disassembled before I had the manual and I always stamp the rods in three spots rod and cap on either side of the joint and 1 on the cap. Should I worry? Should I get them checked at a machine shop? Should I suck it up and get new ones? I am going to reman the engine so I can sell it, I want a new toy! If anyone could let me know what to do or should do I would highly appreciate it! It's on a 2006 Jeep Grand Cherokee 3.7L V6

@odl21 7 месяцев назад

Harbour Fright tool trolley….

@rictaracing2736 7 месяцев назад

I wonder how many heads you need to do in order to pay it off XD awesome machine!

@MrRustyjackson 7 месяцев назад

I was wondering the same but... I think a more intense view for shops like JAMSI is how much times does it save to allow me to perform other money generating tasks vs the Serdi that they have? Thats a tough question to answer. I suspect this CNC Serdi is aimed at production shops like Dart, Edelbrock, etc.

@number2664 7 месяцев назад

Would do a better job for roundness then a form tool I would expect

@gregertman6497 7 месяцев назад

So this is basically the same as a Newen contour

@Calango741 7 месяцев назад

As I was watching the chips fly out and land on the deck surface as the probe came down, I couldn't help but wonder what kind of problems might be caused by a metal chip getting stuck between the deck and the probe. Is there normally air blowing the chips off or something like that?

@JAMSIONLINE 7 месяцев назад

The probe only measures prior to the cut, it’s not actively measuring during a cut. So as long as you make sure there are no chips under when you initially center on that guide it is no problem.

@Calango741 7 месяцев назад

@@JAMSIONLINE Aahhh... okay

@blownaway4371 7 месяцев назад

But.. is that a pilot that goes into the guide? Because One has to install new guides first correct? If you have a head with 2-300k miles, can you trust the "seats" to be "true" in relation to the guides? I wouldn't think there is a "tolerance" relation between the two. (?)

@JAMSIONLINE 7 месяцев назад

All valve seat machines reference off of the guide and therefore the guide must be in good condition to expect your seat to come out in good condition. If your guide is worn out, you can’t expect decent seat results. That’s true for all methods of resurfacing valve seats.

@cedricwilson2055 7 месяцев назад

I can see the flat bed pulling up now. Sell the old one advertise head work and get everything in the region

@ellieprice363 7 месяцев назад

No, don’t sell the old one. Keep it for breakdowns or maintenance on the new machine.

@robertmason8341 7 месяцев назад

So this is obviously meant to go head to head with Newen’s Contour BB cnc single point machine. Do they both operate the same, besides the different graphical interface (software)? I haven’t gotten up close and personal with a Newen and this is first I’ve laid eyes of Serdi’s version, but I can’t really see how you could do it any other way besides the three axis he demonstrated here. Great machine no doubt, however the Siemens sinumerical (sp?) control seemed a little , how to say it, uhh, metric” to me. Like from what I could make out of the their wording it seems a little at odds to what we r used to here in the states. Obviously it’s only a matter of getting familiar with the controls but it just didn’t seem entirely inuitive to me yet it could have been the language barrier with their rep (he did a pretty good job though for it not being his native tongue).

@retiredafce3373 7 месяцев назад

This is awesome!

@paulwest4755 7 месяцев назад

You could probably get rid of most of not all of the chatter by putting a rubber grommet - band on the guide shaft .

@jeffflanagan2814 7 месяцев назад

How much for the Serdi cnc?

@ellieprice363 7 месяцев назад

I’m certain this a great improvement over previous machines of this type. I just wish I could understand the French gentleman’s accent.

@JAMSIONLINE 7 месяцев назад

If you enable the RU-vid provided closed captions on the video they are pretty accurate! We will work on correcting any errors in them.

@ellieprice363 7 месяцев назад

@@JAMSIONLINEI tried the CC. Didn’t help much.

@ericsmcmahan 7 месяцев назад

What is the price of one of those machines?

@mrvector257 7 месяцев назад

Next video - "We bought the Serdi Profile machine!"

@richardphelan8414 7 месяцев назад

There is no comparison to the CNC ,machine ,What the difference is in dollars ,When your looking for Horse power gains This is the way to fly, doing profiles then flow bench flow testing when your looking for that bit of Horse power

@JohnH20111 7 месяцев назад

yes, especially when it comes to a difference of a couple ten thousandths of an inch and a few horsepower

@sirmister4411 7 месяцев назад

Watch the cleaning guy is probably want to know something about this I hope he cleaned up the metal shaving after the video was finished

@automan1223 3 месяца назад

someone tell me how much this machine costs ?

@theodoreshasta7846 7 месяцев назад

Far out!

@Stzer118 7 месяцев назад

Bruh!

@wowgatsi 7 месяцев назад

Why does this Serdi leaves its competitors like Newen behind? And is it more advanced than the Newen? A lot of High end shops uses Newen contours and epocs and the machines have been around for the last 16 years Bottom of Line, is the Serdi better than the Newen? And why?

@carbidegrd1 7 месяцев назад

I doubt the CNC boring head is proprietary. You could build you own.

@magnusdanielsson2749 6 месяцев назад

Or you could just use a stone to touch up the seats. Both heads done before the setup in the machine is done 😁 No really a cool machine. But for making special valve seats I guess.