FE Ford Cylinder Head Rebuild - Serdi 4.5 Three Angle Valve Job

Подписаться 659 тыс.

Просмотров 189 тыс.

50% 1

This video walks through the entire process of remanufacturing a set of FE Ford cylinder heads for a nearly bone stock 390 FE we are building in the shop.
These heads get cleaned and inspected before all new valve guides and valve seats are installed in the head.
After the multi-angle valve job is performed on our new Serdi 4.5 valve seat machine we finish these heads off with resurfacing the intake manifold surface, exhaust manifold surface, and head gasket surface. Finally they are reassembled with new valves, springs, valve stem seals, keepers, and the stock retainers.
Equipment Used:
-Peterson Industrial Bake Oven
-Steelabrator Steel Shot Blast Machine
-Peterson TCM-25 Valve Seat and Guide Machine
-Serdi 4.5 Valve Seat and Guide Machine
-Rogers Machine Company RMC-1000 Surfacing Mill
-Kansas Instruments/Peterson Spray Cabinet
-Various additional hand tools
Parts List:
-D2TE-AA Cylinder Heads
-SBI Intake Seats
-SBI Exhaust Seats
-SBI Valve Guides
-Engine Pro Intake Valves
-Engine Pro Exhaust Valves
-Engine Pro Valve Springs
-EOK Valve Stem Seals
-Pioneer Valve Keepers
-Ford OEM Retainers
Instagram: @jamsionline
Facebook: JAMSI Online
TikTok: @jamsionline
Website: www.jamsionline.com
Outro Music --
Freedom - Atch / atch-music
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/al-freedom
Music promoted by Audio Library • Freedom - Atch (No Cop... Amazon Affiliate Page (Commissions Earned)
www.amazon.com/shop/jamsionline

Авто/Мото

Опубликовано:

5 дек 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 277

@naldahide 2 года назад

This is the perfect example as to why the cost of quality machining is soooo worth it.. Even though its a "stock" rebuild, I'd put money on it that the engine lasts another lifetime because of the strict quality standards set forth from the start of the project.. Well done! I enjoyed watching this immensely!

@loupuleff571 Год назад

You do some really good work your customers are lucky to have you and your dad around !

@randallyarborough7923 Год назад

I have used automotive machine shops for years but it's always seemed like a little black magic...nice to see how the process works

@jordan666120 3 года назад

Doing level 2 apprenticeship for auto tech. Our engines teacher assigned us this video to watch and get an idea instead of just reading dry out of the textbook. Just letting you know that your video definitely gave me a better understanding, and hopefully you hearing that my engines teacher assigned us to watch it, compells you to make more informative videos such as this one. I enjoyed it very much, especially your step by step info. Take care

@christophercraig289 2 года назад

Very enjoyable watching a craftsman at work.

@grahamlucas6033 2 года назад

Dad may be able to retire in the not to distant future knowing that the business is in excellent hands. 😊 Great work

@samrodian919 2 года назад

I really enjoyed watching you do that, you are a credit to your dad with the same work ethic. Get it as good as possible within the anomaly's of working with old engine castings. If I lived in the states and needed engine machining done, I would sent the parts to your shop to get the work done . No matter where in the states I lived.

@christoffer1973 Год назад

So satifying to wach your videos! If I lived in America I would love to give my Engine to your shop for refresh and rebuild. WOW.. Love your work!

@brodyschmidt5579 3 года назад

I’m sure the FE community would love to see more work like this. 👍

@hansyzer1350 2 года назад

De kosten zij Srd Prima. ....en y CSzc,=., ,÷Zaza 5as, POSSE

@hansyzer1350 2 года назад

,6 8

@FordSeniorMaster 2 года назад

Yes! Yes we would!

@gainsum 2 года назад

I second this

@joshuaatkins5197 Год назад

Here here

@LordandGodofYouTube Год назад

The steel shot gives a much nicer finish than bead blasting. Nice job.

@CrazyPetez 2 года назад

That’s a beautiful set of heads with the perfect machined surfaces.

@jerseyjoe2684 3 года назад

A trick with the Serdi (that you may already know) when you encounter chatter that is giving you fits: Turn the spindle off and bring the cutter down until it just touch the seat. Then turn on your spindle until it just starts to spin, holding very light pressure on the down feed handle. That will get rid of 95% of chatter problems. Sorry to be long winded; I rebuilt engines for 23 years and feel compelled to pass on tips and tricks I learned along the way.

@amirkarimi6496 Год назад

Thanks for sharing. I am a manual mill, lathe and cylindrical grinder operator. I make gears, spindles and stuff so I'm not new to machining. I want to start my own business of engine machine shop. Any advice? Or are there any books that I can read to get more familiar with the job?

@natsts50 2 года назад

Nice to see a young tradesman taking pride in his work. On top of that it’s awesome to see a RU-vid channel dedicated to this trade. It may give people some understanding on how much care needs to be taken to perform trade.

@docfischer7291 2 года назад

It’s nice to see that the cylinder head holding fixture is tall enough to measure the valve height as well. Back in the day I was doing cylinder heads on a old float table . PITA !

@davidlloyd6045 2 года назад

Another very good video. I really enjoy watching these video. Please keep up the good work.

@doughills2188 3 года назад

Your narration of your workflow is sooo good. Very informative!

@carsonwhitty Год назад

I love your RU-vid videos because they're more detailed. Keep it up and bring on more

@daviddavidson3606 3 года назад

Why does an engine shop cost so much? Because its well worth it. This video proves it

@Engine_biulds 3 года назад

This is not true I spend 3 grand on machine work for a complete workup of two engine heads both heads were completely ruined pistons ruined, forged rods not intended to be ground were ground and weakened at the bolt area, crank was offset ground progressively on each journal from being ok at the trans side to 5mm offset at the front bearing, all ruined due to the fact the machine shop (green Lee machine in Baton Rouge) had interns fresh out of school working on my second visit. My first engine done was perfect, as the owner did that engine. But the interns completely turned my last engine into scrap. And I wasnt able to do anything because it took me a little over a year to get back on my feet from a complex surgery

@milotorres6894 3 года назад

His dad taught him the right way to do quality work consistently as repetitive as that job can be sometimes ,excellence by designed discipline steps...

@Engine_biulds 2 года назад

I would pay for this machine work any day I just will have to save up... his work is so SO much better than any work I've seen

@electedsphinx4086 2 года назад

@@Engine_biulds that would be poor operation of said expensive engine shop

@electedsphinx4086 2 года назад

@@milotorres6894 well when you have the knowledge to do it right every time as accurate and consistent as this young man it’s more than just work it’s a lifestyle

@jimmyk6336 5 месяцев назад

It's nice to see a young kid that knows how to use a machine, hands and brain precisely to get the job done. My compliments and well done!!!

@milotorres6894 3 года назад

Liked your catch of factory defects in the valve seats having pourous inclusions coming out on the resurface of the old ones ,👍💪😊🙏

@geoffhansen9969 3 года назад

Great to a young man taking such pride in his work

@MrAmorti 3 года назад

Came to the comments to say exactly the same !

@roserides4929 3 года назад

Ok boomer

@TheOmw2000 2 года назад

Interesting trick with the freeze plugs in the exhaust seats. I’ll keep that in mind if our tig machine ever goes down, at the shop I work at we use a tig torch with no filler and just run around the seat, once it cools it’s lose enough to pop them out with a crowbar(? Not sure what the exact name is, I’m new to the engine machining career, just started 4 months ago) your channel is part of what made me chose this path, thank you for the amazing and informative videos.

@djosbun 3 года назад

Factory specification? I'd say 50% better than factory spec! Love the videos. Superb details in both video and description.

@coreymason7320 3 года назад

Another great video! I know these are obviously more time consuming than a short Tiktok, but they are very helpful for the community. Especially me, I learn so much from your videos. Thank you. Always excited to watch them when they get released!

@JAMSIONLINE 3 года назад

Thanks Corey! I sincerely apologize that I have not gotten back to you regarding your TCM-25... crazy busy. Not meaning to blow you off, but please be patient with me 🙃

@josepharagon8259 Год назад

This is the kind of stuff that keeps me at home and sitting on my arsenal… lol😂

@QXZ9027MKII 2 года назад

Top notch sir, wish you the best for building up a craft & being professional on it, rather than dwindling between cubicles. Much obliged for the insight & sharing the knowledge, learnt a ton.

@gsxrsquid Год назад

Beautiful! I wish you had been around when I was building all my FE engines!!!

@ocam988able 2 года назад

Great video. Very informative. First time I see the process of rebuilding engine heads. Thank you

@Vacman0331 Год назад

Awesome job. Keep the tradition strong.

@tomasnedbal2672 3 года назад

Beautiful beautiful beautiful!!! I wish everyone is so precise and thorough as you 👍

@an1m3f9n4 Год назад

I wish I had the money to do this for my 390fe, this is a gorgeous piece of art

@timothygeiger8271 2 года назад

Back in the day, i actually learned how to grind valve seats by hand, with a 3/8 electric drill.

@Larrycarr63 Год назад

Buddy,, you did a great job on the heads and the video,, you were articulate and clear I was able to understand everything you said easily.. If you make more videos and I highly encourage you to do so,, I will gladly watch them.. Great job..

@johnc7431 Год назад

Nice job sitting here watching everything that you do I had no idea there was so much involved

@ORego-em8yf 3 года назад

Next time I order something I’m going to send a shirt button for Jim, he is so proud of you his chest pushes those buttons right off of them! Seriously I think you are inspirational to watch! We can criticize today’s youths but you really are an exceptionally talented young man, both in machining operation and in narrating these exceptionally informative videos! Congrats young man!

@chuckgugino733 3 года назад

I am an FE fan great job I hope there's a guy like you in my area Buffalo NY .

@paulbarber1960 3 года назад

Such a neat tidy clean job 👌 You'd never put them back on the engine, have them as show and tell ornaments in the house 😎

@xr7coug 3 года назад

So much care is hard to find in a shop these days!

@erbenton07 3 года назад

Very cool idea on the valve seat removal!

@frederickarp7911 2 года назад

Dude. I'm envious of your knowledge and skills.

@needforspeedmalmo1814 2 года назад

Interesting video, especially since I’ve just had this work done to my FE heads, and it didn’t turn out good. Valves came in at different height and being used to engines with adjustable valve train I didn’t think of checking the height before assembly and test start. Exhaust valve on cylinder 4 was higher than the others and the lifter probably bottomed out causing the valve to burn. I had to pull the intake, replace the lifter and fiddle with pushrod lengths to make sure the lifter had correct play. Now the engine doesn’t run on number 4 at idle so the heads need to come off again and get redone. A shame that my machinist didn’t put the same pride into his work as you do.

@jackies8538 2 года назад

there is a stem height that i e r a furnaces and a true machine shop would go back and check the stem eye to where the spring seats and cut it to that height don't think either one of these shops understands that.. check the stem height your butt stems if you need to then you clean the heads and put them together and it's done check area it's really not hard to do it wish I got 50 years experience doing this.

@georgiafan6618 Год назад

I had a 427 side oiler stroker (alum med. riser heads) so I took interest in this video. I like that you are knowledgeable and meticulous in this rebuild. My engine builder has similar personal constitution. He installed oversized Chevy intake valves, 3 angle cut, shaft roller rockers, roller cam, ported a bit and port matched. My engine (10.8 CR) was reliable and made good power on 93 pump gas. It turned over and fired up every time up until I sold the car last yr (‘21) some 27 years after I built it. I miss the engine, it’s planning and the anticipation of getting it completed. Enjoyed the video and beautiful job! Your customer will love these heads. 👍🇺🇸

@dougward1102 3 года назад

Very nice work! Hard to find machine shop that takes pride in there work.

@LynxStarAuto Год назад

The welding a freeze plug to pop out the seats is genius.

@dilligaf2827 2 года назад

Rather have your job than mine i am an industrial electrician and its its a hard life, keep up the good work

@raulgaribay6819 3 года назад

Wow. Awesome machines.. I was an engine machinist about 20 years ago... Miss it. Your videos give me a great feeling that I haven't felt in a long time. Thinking about going back to machining race engines.

@taylorsutherland9447 3 года назад

Wish you were closer! Excellent work! I would bring all my work to you.

@FrankDriscoll-cv5ci 6 месяцев назад

Great segment - love the detail on the process.

@ryandeweese363 Месяц назад

H3y. Thanks for taking us along the way and showing the process!! Would love to get into performance engine machining but not many around this area

@Kreupel 3 года назад

This is some good content man. I really enjoy watching this. Keep it up! 💪

@lancehill9971 6 месяцев назад

For FE I would show most owner's that buying aluminum heads is a good way to go and comparing machining costs

@weldmachine 3 года назад

The Serdi is definitely a great piece of equipment to have in the shop. The downside to running an Engine Shop is getting paid your worth. In my part of the world seems most shops are very busy trying to undercut every other shop ?? Not sure how things work in your part of the world ? I was interested to start up an Engine Shop many years ago, but for the above reason i decided it might be best to give it a miss. I am a lot happier doing what i am doing now.

@zephyrold2478 3 года назад

Super nice job, the fumes from welding the galvanized freeze plugs is extremely toxic, a good old handmade thumbs up to you, Merry Christmas to you and yours.

@nickkiofetzis5667 3 года назад

very nice work buddie thank's very much it was very informative and entertaining

@davidmacfadyen165 3 года назад

Really indepth and excellent job, learned quite a bit today. Thanks mate 👍

@GarySmith-up1un Год назад

Enjoying these videos Very much.

@Connectfarr 2 года назад

awesome thanks! do more of these

@modeverything1 3 года назад

Great video! Those heads will probably work better than factory!

@Kyle_Harding 3 года назад

Nice work man, never seen these automotive machines before

@javieraviles6314 3 года назад

Great job . Well performed .

@mikedrndarski2707 Год назад

Enjoy your videos, please keep them coming

@LatysGarage 2 года назад

Excellent video very informative thanks

@TheRealAaronWitchey Год назад

You guys make awesome car amplifiers!!!!

@joevanvalkenburg 2 года назад

A rough is not bad when you have a cast iron head & cast iron block. They Expand & Contract at the same Rate so they won't tare the inside of the head gasket apart. Aluminum heads need a glass like surface.

@albertcoburn5674 Год назад

The way I was taught, use a cut down valve,weld a cut down washer with a SuperMissle Weld rod. Then hammer the seat from the other side.

@thehappytexan 3 года назад

Nice work man. Your customers definitely get what they pay for.

@andrewclement7904 3 года назад

Pro job, keep up the good work.

@garyr7027 Год назад

Many factory engine don't machine this good because it's all about mass production. Get em' built, get em' sold and out the door, production demands it.

@floridamancomedy3151 2 года назад

Awesome video love these detailed explanations of a job no one knows exist, thank you

@Capt_Ron Год назад

Beautiful work!

@leedale4008 Год назад

Nice to see people having pride in what they do. 👍

@bjcasarez8557 Год назад

Awesome work wish I was closer to you guys I had a “ known shop“ do my rocket 350. Not impressed to say the least. A red flag should’ve been when they told me they couldn’t find flat top pistons that there wasn’t any available for my engine. I was able to order them on the spot from Summit and they were just speed pro flattop pistons

@flanagan1501 Год назад

Absolutely love your videos!

@bigal878 3 года назад

Great job 👍🏻

@nitousinfinitarius1866 3 года назад

Hey keep this up your very good at your job, and people like us love this stuff plus sooo much more in the engine, and all about.

@richardwalsh2110 Год назад

Great job, very Informative

@edh.9153 Год назад

Great job! Very professional!

@MurmulisLietiskais 3 года назад

This was super interesting. And the explanation was detailed enough for a professional, yet understandable enough for a beginner. Could you maybe show a bit more detailed look on how you got them to look like new already before machining? :D Like how the cleaning process works n stuff..

@JAMSIONLINE 3 года назад

Thank you! I can definitely do a detailed video on cleaning processes we use sometime. I

@halletts1171 9 месяцев назад

Excellent Work! Thanks for the video.

@dancomstock9964 Год назад

I use a tig welder for removing seats, no weld splatter. Nice shop!

@baby-sharkgto4902 3 года назад

Ahh nice the Serdi video!

@robertspringer4019 3 года назад

You guys great work.

@sheldongilbert808 Год назад

For the awesome perfection of your work is what I meant to say

@Engine_biulds 3 года назад

This is the stuff I do, video of all my work because otherwise you wouldn't know the depth of detail we go into when doing head work. 😍

@alwayssearching1882 2 года назад

Now I understand how it is done right.

@jessesanchez8708 2 года назад

Very entertaining. Very informative. Wish you were in Texas. Need to do this to a 4.0L jeep head.

@user-rv3yi9mb6q 3 года назад

Very very good work 👌💪

@evankibbe590 2 года назад

Something you may not know is that when re surfacing FE head's!!! It is very important to now how much you take off of them !!!! Because of the fixed rocker assembly!!! You may need thicker head gaskets or shorter push rods !!! We ran into that with a 360ci !! It pump the lifters up and shut down the engine till cooled down !!! 0.020 shorter push rods fixed it !!!! 😊👍👍👍👍👍👍🌎🌞

@davian157 Год назад

BEAUTIFUL WORK youngster 👌👌👌👌!!!.......You're going to WORK ON MY fe 390

@timdavis8154 Год назад

Nice job

@netomonte5628 3 года назад

Great job

@jjock3239 Год назад

Nice job.

@dee1089 Год назад

i love this stuff!

@floyddasilva8769 2 года назад

Great video very informative

@stanthology 3 года назад

Cool valve seat cutter.

@rogersmithii2649 Год назад

I love the video. Would like to see exactly how you set up the cutter for the serti. Would be nice to see you set up the head surface machine from the start without skipping anything for time as well. I am new and learning everything as much as I can.

@angelosmith8755 2 года назад

Watching from Brazil, well done bro your shop is awesome.

@a4000t 3 года назад

I've done so many 356/360/390/428 heads over the years,one of the worst factory machined head to begin with. Nice when you correct all the problems. I seem to recall heads with 1 or 2 spring seats taller than all the others on one end of the head.

@marcusmarrs 3 года назад

That’s for sure. I built a many of them referencing the tip not off the spring seats but using a large strait edge clamped to a precision flat surface so it could reference off the head surface. I then used a dial indicator to set the tip height. Worked great!

@johnolson5871 3 года назад

I enjoy all your RU-vid videos

@bullvine2062 3 года назад

More great work. However a kind suggestion is to Tig weld the core plugs to remove valve seats. Far cleaner, just as quick and you can just fuse them together, no cleaning. . Thank you.