what would be the range with a hitec HS-805BB servo ? normal its from 1 to 180 range . and does it work on 6 volts ?does it need to stay connected after adjustment ?
hey goBILDA nice to see ur video👍, please help me to choose which component i should buy if i have some project🥺. I want to make servo move due to DC voltage input, DC input from 0.4V-4.5V (i want servo movement depends on input voltage, maybe like throttle gas). And i want make it adjustable by screw like this video for servo movement. I don't want to use Arduino, bcz i just need 1 input and 1 servo and make it simple hehe. Help me please, thank you so much 😁
So looking to update my kicker motor throttle and steering on my fishing boat from a linear actuator to a servo. Both actuators are hooked up to a 4 way switch controlled by a wireless remote. 2 channels work the throttle and 2 work the steering. On the throttle end I have a speed controller so I can better fine tune the trolling speed. The 12" actuator I am using for steering is way to slow. Can you tell me what I would need to get in order to swap over to actuators? Steering I need it to move quickly and has about 12 inches of side to side movement for full turns. Throttle has 2 inches of travel. Everything is running on 12v.
I think I received a product return because all the screw heads to adjust the pots were almost completely stripped. The plastic appears to be very very soft. I never was able to make the adjustment to increase the travel work on my servos at all.