Setting Up A Kawasaki ZX6R As A DRAG Bike! 

Definitely can tell the difference in the M4 knock off….. Doesn’t have the same growl as the original M4…. Love the bike 🏍️

My 2009 zx6r went 9.95 at 138mph stock wheelbase, stock tune, stock exhaust, on 87 octane. I've got 45,000 miles on it now, I've launched it on the limiter over 100 times. Still has the original steels in the clutch. They are blue from all the heat, I just rough them up on the garage floor. It's a great bike.

Back in 2006 when I got my 636 I dropped and stretched it immediately. I eventually ran a best of 10.09 with it dropped/stretched/geared and a little 40 dry shot. That was also at a low 120mph b/c I was bracket racing trying to not break out. My normal mph was 136-138. LOVED that bike!

Putting all that money into the bike and is using a knockoff m4, jfc lol

MooreMafia putting the “pimp juice” on the 2DLAR ride😉 another great video👍🏻

Chris and Moore Mafia, y'all rock! Love the bike. Peace ✌️

Removing the seals from the bearings is a cheap way to reduce drag also. Use Mobil 1 blue EM grease!

That Edy brake speeds up the dyno times for sure. No more waiting for the drum to stop.

That front wheel is backward lol😂

Make 600's great again

Is there really a huge difference in feel for ceramic wheel bearings for street riders? Worth buying?

What's your opinion on ceramic wheel bearing for everyday riding not track use? 2023 harley lowrider st.... 121hp 133tq at wheel

My 2013 zx6 did 118hp. All I have is m4 exhaust with ktm filter

Nice, good stuff on the bearings 😊

I went a 9.77s on my swb 599cc ZX6R. They are pretty fun bikes to ride.

I was wondering about rear caliper drag and how to reduce or eliminate it. Like to take my Suzuki DL677 MM flashed bike to the strip again!

I keep telling my guys around here to vest in those bearings.....😮😮

the chuckle after $2 made me chuckle as well lol, inferring correctly on the following statement that would demonetize this video lol

Chris, did you give up on the other cheaper brand of race fuel you were trying out a few months ago? Sticking with the MR12?

Taking my bike up there

Brake drag on the front before and after were different. Not saying the wheel bearings are not good because they are buuut…

M4 great pipes but the not proper original m4'is an issue especially on a mostly beast of a streat fighter 💥

I've seen one other stretched out 636 of this gen, as long as they having fun lol hurts to see ngl

I was thinking the saying “ 2 dollar make up holler”

With a full exhaust? Just keeps me thinking to just do a slip on when gains are minimal

Don't get me wrong. The bearings are noticeably better. Especially rolling it around in the shop or driveway. If you ride a lot a lot alot a lot on the street you may notice the turn in is smoother but as far as actual "performance" (going faster) per dollar ain't no way they're worth that much money. Overpriced mod. You'll notice %100000 more difference with the bike having Chris tune it for you.

Where’s part 2?

I’d really like to try those bearings for my street bikes but $475 per set seems crazy

Can I adjust tb (sync) after ecu is mapped?

How long does it usually take to install ceramic wheel bearings on both wheels? Congrats to Anthony for winning the $500. 🥳

Right off the bat u can tell the difference in the exhaust. That knock off sounds like a fart can civic lol

Swing arm effects numbers?? More like the weight of the LONGER chain along with gearing.

I thought the tag was in reference to the song Me So H0rny... When someone ask for a grudge race... What can I get for $2 dollars? Anyting you want. 😁💪

Wait , strength or mass ?? I can see strength and maybe a little mass for a beginner . Just asking

So it's an Mfaux exhaust?

Why does the rear tire have those 2 shinny marks?

He rides a 600 and all his friends ride zx14s😮

Bitchin' content!

CM$🤙🏾🙏🏾✌🏾

Sure can get dyno sessions wrapped up sooner without sitting there waiting for the dyno drum to quit spinning.

So would it be good to say what ever your swingarm is you lose half that in hp. If its 10in u lose 5hp. if its 16in over u lose about 8 and so on Same difference would be 2hp. Ever inch over stock ?

Them kawi’z all look like small cc bikes if its not a zx10 or a h2 cant change my mind

Sheeeesh.... the hate on the knock off is real 😂

So what is the point of making a naturally aspirated 600cc sportbike into a stretched drag bike?

The pipe is a M4 street slayer, header is ebay knock off

Bunch of haters in the comments😂 if someone wants to build a 600 let them do it , its not your money haters

He needs help with that chain next.

Invest thousands in aftermarket upgrades on a small block..... Why not just buy a bigger bore bike??

🤘😈🤘🔥🔥🔥

👍💪

No his big ass needs a 1000cc not a hyped up 600cc 🤦🏾‍♂️

Can I purchase a tune for my r6? 😈

M-forgery with all the rest of that high end gear? 🤦‍♂️

Just add lots of carbon fibre', titanium and liquid money :) remove everything else :)

That pipe sounds terrible!

Why not just do all this to a 400? Same concept. Absolute waist of time and money

Nice to see my bike extended just to know I would never lol and smh knock off m4 and 2 dollar plate says a lot about this guy.. sounds like crap btw

And here I thought the 2DLAR had something to do with the bike being from Japan.

What an absolute waist of time and money

My 21' 636 will smoke this thing. Embarassing to extend the swingarm on a 600. I need to race this guy. Please drop his @ so I can rag on him. (Vid of my 636 on my channel)

Sounds good,I thought "2DLAR" was what he paid for the exhaust 🫤