Setting Up A Siphon Feed Spray Gun

Подписаться 498

Просмотров 161 тыс.

50% 1

In the equipment set-up segment of the "Operator Training Program" we demonstrate the procedure to set up a conventional air spray siphon gun. In the full length training video this segment also shows you how to set up your gravity feed spray gun, your pressure feed spray gun, your air-assisted airless or Airmix spray gun and your airless spray gun. The full length "Operator Training Program" can be used to comply with NESHAP and 6H requirements for an operator training program. Whether or not you need to comply with environmental regulations, this training video will help you to improve finish quality, improve productivity, reduce rejects and rework, reduce your coating and solvent usage and reduce waste stream generation and much more. The entire training video will soon be available online at www.sprayequipmentspecialist.com and other sites to be announced.
If you require hands-on training or consultation these services are now available. To inquire about these services just post your request on the website or email us your contact information and we will get back to you quickly.

Опубликовано:

9 июл 2013

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 27

@looking_33 2 года назад

Very helpful video. Thanks.

@lokita2491 2 года назад

Nice 👏👍

@3rdGenGuy 10 лет назад

would a Siphon feed gun be better than gravity feed for single stage Urethane paints?

@el.handyman. 8 месяцев назад

Hello, what is the tipe of air compressors i need to use the siphon gun.

@lennykoss8777 2 года назад

💗

@cvillarrealb 5 лет назад

Thanks for sharing

@michaelvmichalski8239 3 года назад

Thanks.

@Alicesweetalice 8 лет назад

what brand and model gun is being used in this video?

@user-ip7vu2po6x 2 года назад

Binks 95 HP

@gvanys 3 года назад

Can this be used to stain a fence?

@skysharksingh 2 года назад

Yes

@seb3858 4 года назад

I like the ancient ways

@michaelvmichalski8239 3 года назад

Which means?

@user-ip7vu2po6x 2 года назад

@@michaelvmichalski8239 HP

@MAZEMIND 2 года назад

Hell Yeah, team human sacrifice all the way baby.

@bachased4507 7 лет назад

im warak pom

@ZZZZ-wz4ue 7 лет назад

… here he does not attempt to explain where the air fan pattern knob should be adjusted to. Wide open , half way or just a few turns out as the fan pattern adjustment has much to do with what "texture print" you will achieve with the paint once sprayed out on the surface. We can only assume that the fan pattern is open fully. But with that said, he demonstrates as the fan pattern is widened the amount sprayed out is thinned and lighter than if the fan pattern is reduced in accordance to where the fluid needle is adjusted to. This leaves us to believe that to spray properly and with an adequate "flowable" spray amount covering the surface being sprayed one would have to UP the hair pressure slightly to achieve more paint being atomized at any given fluid/air pattern needle setting or decrease / back off on the air pattern needle to achieve a denser yet smaller flow and pattern. Otherwise the end result will be a grainy or slightly textured end product due to either too much paint coming out and not enough dispersant of material between gun tip and surface or intermittent slightly dryer areas due to too much air and not enough fluid being delivered.

@sw74glssuperstar61 6 лет назад

I completely agree 😆

@jimmorton1169 6 лет назад

Hey zzzz I have a binks model 18 siphon feed gun. Do I have to worry about the tightness of what I call the "butterfly collar" thing that I screw onto the tip of the gun. I know it is used to change spray pattern from horizontal to vertical and all degrees in between--BUT does it effect flow rate? So far I screw the collar on all the way and crank it down at vertical or horizontal. Hope that makes sense. learning

@throttle_down_beers_up 5 лет назад

All guns are different depending on tip size...so it will have to be set to taste upon painting. Not all guns will tune the same.

@vk7408 5 лет назад

I appreciate the information as I've just started to learn how to spray. Please if you want more viewers, hire a script writer, video production co, host and get rid of this 1980's shop class video style.

@michaelvmichalski8239 3 года назад

Too late. Company closed after 2008 recession.

@doctorfeinstone6524 3 года назад

I think they DID have all that stuff

@michaelvmichalski8239 3 года назад

We made this video 20 years ago, on a shoe string budget. No script writers, constant time constraints, etc. Before this video, there was no comprehensive training program for the wood finishing industry, yet the EPA required Wood Product Manufacturers institute new environmental guidelines, which included an operator training program. Manufacturers had to train all employees involved in the finishing process be. We provided them with something that they found beneficial and allowed them to comply. This entire video is over 2 hours long and covers everything a PRODUCTION LINE finisher, Finishing Supervisor or Environmental Compliance Manager needed to meet the EPA rules. It was not intended to be the Ultimate Guide to Wood Finishing. That would take too many videos to cover. We did the best we could in the time available. I hope that you find some benefit in viewing just the clips, that I have posted. There is a portion of the video that covers overall spraying techniques and yet other sections on how to apply specific coatings, such as stains, sealers, topcoats, pre-cats, post0cats, etc. All you see here are just VERY short clips of SOME of the topics covered.