SHARKSET Install! How to install Sharkset suspension

Подписаться 8 тыс.

Просмотров 37 тыс.

50% 1

We have unboxed the Sharkset front suspension. Today I take you through how to install your new suspension.
This turned out to be as easy as installing the fork suspension. The hardest part you have to deal with installing the wiring for the RGB.
If you own a German controller, please note that you will have to rewire the connector that goes into the controller by changing around the black and red cable. This is because the polarity is swapped.
You can now buy Sharkset front suspension at scootletsgo.com
How to change your Ninebot Max brake cable • How to change your Nin...
If you like my content and want to help support future projects, please feel free to help out.
/ scootletsgo1
All donations go to helping produce more content for you guys.
Buy rear suspension here s.click.aliexp...
And front suspension here s.click.aliexp...
Needing some common tools?
US Links:
Hex Keys amzn.to/3qvMEN4
Threadlocker amzn.to/3s3I60C
Wrench set amzn.to/3pw9SRZ
Tire Slime amzn.to/3qz1x0Y
Electric pump for tires amzn.to/3au2brd
UK and EU
Hex Keys amzn.to/3mAXC13
Threadlocker amzn.to/3nBwIHv
Wrench set amzn.to/2WylTdG
Tire Slime amzn.to/3p2sAB3
Electric pump for tires amzn.to/2Zfof2p
Follow on Instagram / scootletsgo
Email me at contact@scootletsgo.com
Music by www.bensound.com/
As an Amazon Associate, I earn from qualifying purchases.
[ScootLet'sGo!] is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.]

Опубликовано:

5 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 136

@ScootLetsGo 3 года назад

You can now purchase your very own Shakset front suspension from scootletsgo.com/product-category/sharkset-suspension-for-ninebot-max/, comes in yellow and a limited edition white.

@JohannaAnna2014 2 года назад

Super video, tx! We can install shark-suspension on a Ninebot g3od 2?

@Osmanity 3 года назад

It comes with RGB remote, that is awesome!

@ScootLetsGo 3 года назад

Yes it does. :).

@tomsyn 3 года назад

super stuff! off to make a cup of tea and enjoy this. I'm so close to buying it. kinda worried about the rgb installation and connecting it to the console. super detailed as always. the rick shiels of escooters! love what you have done with pimpin it right up! only thing missing are bose speakers :D

@ScootLetsGo 3 года назад

Haha thanks dude, means a lot. Don’t be worried about the RGB installation. Once you get everything in order it’s super simple :).

@ScootLetsGo 3 года назад

Oh and I’m not sure I wanna put speakers on there. Haha. I’d like to have a external battery. But that’s no most expensive mod yet

@MrSpecies7 3 года назад

Well done bud,hope it works well when you get it out.

@ScootLetsGo 3 года назад

Thank you :).

@joelrodriguez-kf1lk 2 года назад

Looks fabulous

@ScootLetsGo 2 года назад

Thanks

@zoranbalog965 2 года назад

very good video. Is there anything similar for Aerlang h6??

@MrTysoncrouch Год назад

Hey mate, just a quick one with aligning the hub cover for the brakes.. how did you get rhe cover off of the wheel assembly?

@leeb2349 3 года назад

Love the vids, can you please review the sharkset suspension and compare performance comparisons with other front suspensions you have tried?

@ScootLetsGo 3 года назад

Absolutely. :)

@jasonthompson3434 3 года назад

It would be nice if you noted that the suspension you removed was not stock. I was staring at this and trying to figure out which crazy variant of the ninebot max you had.

@Its.Aleksz 3 года назад

Very good video, thx :) And my Sharkset is finish :)

@ScootLetsGo 3 года назад

You’re welcome

@MrSlashtf2 Год назад

I think my Sharkset stem came with the wrong screw hole at the top. It's facing the front instead of the right side :( Do you think that it's a defect or am I just reassemblying the stem wrong

@ScootLetsGo Год назад

I believe this crew is not really necessary. But if it does bother you, please contact the retailer you bought the set from.

@beywatch01 3 года назад

My friend thank you so much for this video. I installed mine today and I'm really happy. Love it. Question where did you get the longer kickstand. The original one is too short lol thnx

@ScootLetsGo 3 года назад

Great to hear thank you. And yes you can pick up the longer kickstand. Go to the suspension link in the description and one of those links should have that available for you.

@beywatch01 3 года назад

@@ScootLetsGo Awesome thank you for the quick response. Keep the videos going we appreciate them

@ScootLetsGo 3 года назад

No problem. :). Any suggestions to what you wanna see next?

@beywatch01 3 года назад

@@ScootLetsGo Sharkset products like rear suspension or new items

@ScootLetsGo 3 года назад

Be awhile before Sharkset do anything haha

@bastardowl 3 года назад

I'm intersted in the suspension but not the rgb aspect. Is it possible to just not bother with the lighting?

@ScootLetsGo 3 года назад

It comes with the RGB in the kit. And you desire if you want to install that on there or not

@magicchef4938 3 года назад

Best video Thank you! I will use this as a guide. Can you make a video on how to change the springs? Is it as easy as unbolting the shocks from the swingarm and twisting off the knobs on top of the springs?

@ScootLetsGo 3 года назад

Thanks dude. Yeah I will do a video in the springs. :). I believe they are very easy.

@jmm03256 Год назад

I'm almost done just don't have a place to connect my LED cable! Please help

@deerock619bc 5 месяцев назад

Hello just found ur videos !! Would like to ask if they make this front set up for the F-30 kick start ninebot!!????

@kevinp4782 3 года назад

Amazing pro-video ! Thanks :-))

@ScootLetsGo 3 года назад

Thanks glad you liked :). Great to see your videos too :)

@amazingmao 2 года назад

@11:50 About that the extra bit of cable with a plug that you tucked away inside the neck isn't seen again for the rest of the installation. You mentioned that we don't need that yet, but what is it really for?

@JohannaAnna2014 2 года назад

It is for a next project from the Ninebot...! They want to add some lights on the sidewayS of the board...so they think in advance, and added another cable!

@Osmanity 3 года назад

That was fast!😮🤩

@ScootLetsGo 3 года назад

Gotta beat the rest ;). Hope you like? What do you think without the music. Do I keep this format?

@Osmanity 3 года назад

@@ScootLetsGo yea love it, didn't notice that there where no music until you mention it hahha but it is no need for music just in the beginning/ ending but anyways love it!

@ScootLetsGo 3 года назад

Thank you :)

@BloopersTuesday 2 года назад

I’m having trouble taking the wheel nuts off, its very tight and doesn't loosen with the deep socket, 15mm that I have. The video is very quick at this part and I cant get anywhere. any help? I will have to buy vice grips I guess.

@ScootLetsGo 2 года назад

If it's your first time taking the wheel off, there is a lot of gunk holding it tight. Get someone to hold the scooter steady and put some weight into to taking it off.

@jaykay4068 Год назад

Would this suspension fit on a bolzzen magneto?

@jmm03256 Год назад

Did you have to use a spacer on the none brake side of the wheel?

@ScootLetsGo Год назад

No spacer required

@sometin_else 3 года назад

will I have an issue installing this if I am using an external battery? I already have the external battery wire running through the stem

@Culky 3 года назад

Do you think Sharkset will do a rear suspension? I ordered this one (with your code ;) and I'm looking forward to getting it on. Do you think having rear as well is a must?

@ScootLetsGo 3 года назад

I really hope they will do a rear suspension on this. I thing it would be sweet. And thank you for using my code :). I think if your going to have front suspension. You may as well have the rear. It makes a difference. When you come off a curb or over really bad holes or drains without you still get that shock on the back

@Atomicul 2 года назад

i cant connect the suspension. i dont have any connector what do i do help

@jmm03256 Год назад

Same here I don't have a open place to connect my LED

@jmm03256 Год назад

Did you ever figure it out?

@Atomicul Год назад

@@jmm03256 well sort of. My original motherboard broke and the new one I got has a connector but I have broken the led connector trying to fit it in the rear light connector

@NikamDJ 3 года назад

Can I ask you about this big handle on a steering wheel? What it is for?

@PrinzEric 3 года назад

Thx for Video 🙏 But now I hear the Sound and uff... How sounds on road ? Next Test After month in use to see rust or damages. Hope you will also review like the other one.

@kevinp4782 3 года назад

First result on the road for me was fine, no strange noises during rides, didn’t feel bumpy at all. In case you need more suspension you can just switch the springs to heavier ones ( 3 levels delivered and normally soft ones are already good till around 95/100kilo )

@ScootLetsGo 3 года назад

I managed to get it out for a test today and it sounds good on the road. You don’t bottom out much unless you are hitting every curb. But even then the sound isn’t really a thing. I also found turning the springs a little helps. As they tend to wanna flex a certain way and the sound you heard in the video was them against the plate at the bottom where it sits. So I just turned 180 degrees. I will have a review out once I’ve had a good play :).

@calabreseporai 2 года назад

Do you have a “how tô” vídeo for Xiaomi m365 pro 2?

@ScootLetsGo 2 года назад

Sorry I don’t. Maybe time for me to get one of these scooters

@Ali-lt3qx 3 года назад

U would have a lot of subs if more ppl new about u

@ScootLetsGo 3 года назад

It’s getting more people to know about me haha. I’m in all the groups ;)

@infatum9 3 года назад

My no.1 question is, why do Xiaomi, Ninebot or whatever don't roll out scooters with suspension in stock?

@ScootLetsGo 3 года назад

Keeps cost down. They mass produce and it’s just one more part to add complexity and cost

@infatum9 3 года назад

@@ScootLetsGo True. Yet I went for a more expensive one after having Xiaomi (no stock suspension) since it had shock absorbers in stock.

@static129 3 года назад

can u skip the led install? i feel like it isn’t so effective, and figured i would save time on it

@ScootLetsGo 3 года назад

You can. There’s no need to install the LED’s

@static129 3 года назад

@@ScootLetsGo oh okay thanks, do you think there's a big difference between the sharkset and the fork one you previously used?

@janisekentwhatwaswrongwith266 3 года назад

What was wrong with the first suspension kit you had installed ?

@ScootLetsGo 3 года назад

Nothing wrong really, just wanted this one for better looks and features. Also Sharkset is more comfortable.

@chriscoilcreator6626 2 года назад

Great video man 🙏🏼 which rear suspension can you recommend?

@ScootLetsGo 2 года назад

Hey, thank you. At this time I can't really comment on which is the best rear suspension, as I am waiting for the Sharkset rear suspension to come out. Then I will be able to let everyone know. :)

@chriscoilcreator6626 2 года назад

@@ScootLetsGo ok thanks

@amark3308 3 года назад

Are the lights optional to install or have to be installed?

@ScootLetsGo 3 года назад

They are optional

@mehrweg 3 года назад

does it save your rgb setting when shutting the sooter off and on?

@ScootLetsGo 3 года назад

I found that mine comes back on to the setting I left it on. However, I’m not sure if you have the German variant that it would be the same

@metallical87 3 года назад

does it affect your balance on the scooter when riding it?

@ScootLetsGo 3 года назад

Not at all :).

@_masic_ 3 года назад

Hey bud! Hope all is well, im going to be purchasing this shock as soon as I return my Monorim V3 (worst suspension). However I feel I got the stem bolt screw mismatched while installing the Monorim shock. Does this shock come with a new stem screw? If not is there anyway I can buy that one screw?

@ScootLetsGo 3 года назад

Hey. That’s amazing. :) When you purchase. Please use my coupon code SCOOTLETSGO10$OFF to save $10. And it helps me out. Also it doesn’t come with the stem bolts. But you can buy them here with Kickmotion bit.ly/3mGm5U0 I look forward to seeing your thought on the suspension.

@babyjrluv 3 года назад

I have the Monorim V3 and installation was a pain and no matter what rings i used thre is still a slight wobble. Hoping this shark set is better

@juniinku8206 2 года назад

Hi, I installed it and I have a little play on the stem which caused it to move back and forth. Does anyone have any advice on how to fix this please?

@ScootLetsGo 2 года назад

Have you tightened down the centre screw enough?

@ScootLetsGo 2 года назад

Maybe use threadlocker too to help

@juniinku8206 2 года назад

@@ScootLetsGo The issue seemed to come from this, yes. I screwed it with the scooter in height. By putting the wheel on the ground to raise the suspension and by screwing the central axle back, there is almost no more play. Thank you for your quick answers 👍

@metallical87 3 года назад

shame it doesnt have much of a mudguard and rear suspension too

@ScootLetsGo 3 года назад

Yeah the rear suspension mudguard, needs a little more, but it's cheap. You can always fashion something to extend it. :)

@ROBAS112 3 года назад

What that blue blinking indicator on the battery means?

@ScootLetsGo 3 года назад

This is the bms. I believe it indicates all is normal with the battery

@ROBAS112 3 года назад

@@ScootLetsGo What voltage that socket gives?

@ScootLetsGo 3 года назад

I’m not fully sure. But I think it’s around 5v as most LEDs need that to work. But current is around 700mah

@bypyhgyk 2 года назад

How much did it cost that time when you got it?

@ScootLetsGo 2 года назад

I think I paid around £180

@bypyhgyk 2 года назад

@@ScootLetsGo oh.. happily price dropped now. thanks.

@ScootLetsGo 2 года назад

It’s great that it’s coming down for everyone :)

@bypyhgyk 2 года назад

@@ScootLetsGo what about that chinese cheap Rear suspension- do you think it is safe enough to use daily?

@felixg7735 3 года назад

The only real issue I see, is with this setup's lack of a usable front fender. The designer of this unit gave very little attention or effort in the designing of a competent front fender that would provide approximately the same level of splash protection as the original. Other than this, the Sharkset does appear to rock.

@kevinp4782 3 года назад

I am driving this suspension now 2 days and in very rainy and snowy weather and I can tell you I had not 1 single splash on me ! So the front fender is working perfect !

@ScootLetsGo 3 года назад

This is great news :)

@felixg7735 3 года назад

@@kevinp4782 I find that hard to believe, but if what you state is accurate then great to hear.

@seranoh 2 года назад

I can confirm. Front fender is working perfectly in regards to splashes. One remark about the top of the fender is that the plastic breaks easily. It's very stiff but it breaks fast. Mr Loctite to the rescue.

@trollmaster4648 3 года назад

How does this feel with just a front suspension? I thought it was two but it’s a different brand on the back. Is it good with just one front suspension?

@ScootLetsGo 3 года назад

The front end feels awesome. I know different brands make a difference. The back could use some tweaking. However. It’s better then no suspension

@trollmaster4648 3 года назад

Scoot, Let's Go! Ok thank you I’ll be getting one soon enough

@trollmaster4648 3 года назад

Scoot, Let's Go! I ordered one just now how long is delivery to UK

@ScootLetsGo 3 года назад

Where did you buy it from? If aliexpress this could take a few weeks to around a month. But be prepared to wait longer as of the border issues

@ScootLetsGo 3 года назад

If Sharkset I got mine in less than a week.

@GeorgeCristianMatei 3 года назад

What type of suspension you have on rear / back ??

@ScootLetsGo 3 года назад

It’s a generic variant no brand. You can see here. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-M4dY_AK0WOc.html. I believe I put link in the description:)

@GeorgeCristianMatei 3 года назад

@@ScootLetsGo thank you

@ScootLetsGo 3 года назад

No problem 😉

@eugenschunda1523 3 года назад

I want to install my shark set right now. and have installed a monorim mx1 for 2 weeks. My question is whether I can get my original oring up and down on the Shark again Have to take the handlebar? Sry my Englisch Do you understand what I mean ? Monorim supplies this aluminum ring for the top instead of the original course material ring. Do I need the originals at shark?

@ScootLetsGo 3 года назад

Can you please head over to Instagram follow and send me pictures :)

@eugenschunda1523 3 года назад

Please give me your insta or facebook name!

@ScootLetsGo 3 года назад

There’s a link in the description. Or search scootletsgo :)

@eugenschunda1523 3 года назад

OK sent you pictures

@SHARKSET 3 года назад

you should use original Ninebot's O rings (stack rings).

@yAuMe7569 3 года назад

The mudguard seems far too high and small to provide effective protection against water and mud splashes.

@ScootLetsGo 3 года назад

That front part of the mudguard is mainly for styling. But it does help. I’ve had it out with a little rain and it does keep the water off my feet.

@yAuMe7569 3 года назад

@@ScootLetsGo This is a point that should be made known to your listeners during your evaluation. You don't seem to compromise in your tests and I hope it will continue for the following ones because that's what I like about your channel.

@ScootLetsGo 3 года назад

@@yAuMe7569 I’m working on an review. This will be factored in. :) It’s still early days and there is much to be learned.