Sharpening Woodturning Bowl Gouges and Scrapers Tools. Fingernail Jig Grinder - #66

Подписаться 41 тыс.

Просмотров 53 тыс.

50% 1

I've been talked into how I sharpen my woodturning bowl gouges and scraper tools on my bench grinder using a fingernail jig.
There are many other videos out there on sharpening, and this is my method.
Like the jig I use in the video? It's made in the UK and is available on eBay here:
goo.gl/BPWiiO
See Below for useful links to stuff used in this project.
At www.msabansmith.com, you can read more about this project, see images, and possibly download one of the projects .pdf worksheets or full length, advert free videos. There is also a free mailing list!
Hampshire Sheen: Find your nearest retailer: www.hampshiresheen.com
Something else of interest: Read my FREE newspaper at www.turnersrest.com
The UK & Ireland Woodturning Symposium:
www.ukiws.co.uk
Useful Amazon links to related products used in this project. These links will take you to pages appropriate for your location:
Kits and Finishes
Reactive Paints: geni.us/hSIcJx
Wood Blanks: geni.us/1pZC
Airbrush and Compressor: geni.us/3zfB
Pyrography Machine: geni.us/Sjz
Watercolour Pencils: geni.us/3vIj
Spirit Stain: geni.us/7G2
Liberon Gilt Creams: geni.us/3Fxi
Powdered Metals: geni.us/3fZ7
Pen Kits: geni.us/3raA
Project Kits: geni.us/1Kbf
Blow Torch: geni.us/2VhP
Dremel 3000: geni.us/15xa
Dremel Burrs: geni.us/3zqw
Lathes Tools and Accessories
Lathes: geni.us/VIu
Scroll Chucks: geni.us/v7C
Jacobs (Drill) Chuck: geni.us/3KGt
Box Set of Tools: geni.us/4AhX
Thin Parting Tool: geni.us/ym7
Captive Ring Tool: geni.us/BnF
Spiralling Tool: geni.us/2MKd
Bench Sharpening Grinder: geni.us/qBX
Fingernail Jig: geni.us/429R
Centre Finder: geni.us/3XLh
Live Centre: geni.us/AiI
Pen Mandrels: geni.us/C8C
Personal Safety
Face Shield: geni.us/3OrM
Respirator: geni.us/Z44
Keep up with my socially!
Facebook: / msabansmith
Twitter: / msabansmith
Google+: plus.google.com/+Msabansmith/
Instagram: / msabansmith
*** Small Print and Disclaimer: Woodturning can be dangerous. The project in this video is a demonstration of a woodturning project suitable for beginners and is not intended to replace a physical lesson from an experienced woodturner.
At all times, you are responsible for your own safety, that of your workshop and other people in it. Ensure you wear suitable personal safety equipment at all times.
This is my way of turning this project - Other turners may turn it differently and you may find your own way of reaching the same result.
By copying these techniques, you do so at your own risk.
Please note that I am not sponsored by any of the companies or products linked to in the 'Useful Links' section. Nor do I necessarily endorse them.
Thank you for your understanding.

Хобби

Опубликовано:

11 июл 2016

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 57

@antfactory_woodworking 2 года назад

Thank you for a good idea!👍

@MikeWaldt 8 лет назад

Well done mate, a lesson in the art of grinding, kept simple, but very informative. There is far too much "Dark Art", regarding sharpening, and you have shown that there needn't be. I have to say that I was extremely impressed with your technical terminology throughout, the "slidey stick thing" is a very effective piece of kit. Great video Martin,. Cheers Mike

@steveweaver69 8 лет назад

Martin, you know we love you videos. I have 3 words (?) C B N wheels. They are completely balanced, NOT friable ...no bits/dust coming off and can not explode, no need for shielding, take VERY little metal off tools ( therefore last years longer), no heat produced, quiet, and last forever ...almost,........ no dressing, do not get smaller with use therefore never need adjusting, quick...one pass. That are a bit expensive but in the long term will save you money, work and produce a better edge. FYI love tech terms, slidey bit.....stick thingy......makes all the more watchable!!!! Thanks again Martin.

@pjbaddict 8 лет назад

Love the slidy in and out thingy... Also really good that your grinder is turn on and offable

@woodandfood Год назад

I just bought this jig and it’s really good for me as a beginner!

@KenWeinert 8 лет назад

'Slidey in and out bit' - thank you for keeping it technical :) Seriously, thanks for sharing your methods. I always enjoy your videos.

@BrendanSmyth-fj4bn Год назад

Great video, I've just got the same system and didn't know how to use it.

@ToneWrench Год назад

Very useful video. Thanks. I’ve just bought the bowl attachment so I’ll be on it tomorrow!

@pauldrackford3296 8 лет назад

Hi Martin, When I first took lessons on turning, I was told "if you want to learn how to turn, the first thing you have to learn is how to sharpen" So I learned how to sharpen freehand. Jigs make things sooo much easier and repeatable, although a little slower. For a quick dressing I still do it freehand (I did bite the bullet and buy CBN wheels(much nicer)). For reshaping I use the jigs, mine are "Wolverine" just like your setup - with the slidy in an out thing. Your fine wheel looks like a 2" wide - much easier to use than a 3/4" wide wheel. Cheers Paul

@ProDMiner 2 года назад

Hey ty for this, this made alot more sense then others I watched. I actually took a leaf spring today, cut it all up made my own massive custom scraper. making the handle out of oak right now. but I may get some african paduk for it. Then as soon as its turned resin it, so it keeps that gorgeous yellowish / orange

@ErikAnderson1 8 лет назад

Nice video with great angles on the sharpening and your tips are great. Thanks for posting and I like the jig you have.

@peterchristopher4376 4 года назад

Hi Martin I have just hand made out of scrap bits of metal in my garage (workshop) a bowl gouge sharpening jig but had no idea how to use it you have just put me right on that thank you so much.

@IanMaude 8 лет назад

Great video Martin. It's amazing how well slidey out things work :) I really must practice my sharpening skills!

@yuvallahav 8 лет назад

Some good information there Martin! :) Thank you for sharing, these types of jigs and how to sharpen your tools is one of the most important lessons for beginner turners. Yuval.

@Bretonlad 8 лет назад

Once again a very informative video well presented for us. I have enjoyed your all of your videos so far Martin.

@broadsideguy967 8 лет назад

Great video, Martin. And a terrific grasp of the technical terminology . Cheers. Dave

@keithremnant7234 4 года назад

Hi Martin, I've just this morning received that very sharpener, not the scraper one, from Mick Chambers, £34.00, so thanks for this video. I've also noticed a dark line on my wheel and you explained that as well. Cheers mate.

@markhollingsworth3097 3 года назад

Dark line on your wheel usually means that spot has become engrained with dirt etc...use the dressing tool to take a bit off and give a fresh surface

@SurfCracker Год назад

Perfect. Clear and concise. Thanks!

@geofo60 8 лет назад

Nice job Martin, kept simple & as 'M.W' said, no Dark Art involved. I have the same jig but I also have an Ellsworth gouge basket & use the 2",4",7" set up for my grinder with 6" wheels. Works for me. Thanks for following up the suggestion/s for doing this video. Regards ....... Geof

@ShevillMathers 2 года назад

When you were sharpening the scrapers it was clear to see dark areas on the grinding wheel. This is where metal has embedded in the wheel surface, thus ‘clogging’ up the available grinding surface. The use of the diamond dressing tool is to remove this embedded material to expose a uniform grinding surface across the width of the grinding wheel. I hope this adds a little bit of useful information to your demonstration. Regards from Tasmania Australia.

@carolriley569 5 лет назад

Very informative and helpful...thanks!

@gunterschone8402 8 лет назад

Beautiful video, Martin. I sharpen my turning tools as well.

@gunterschone8402 8 лет назад

That's right, Martin. For stump tool = More power, greater risk of injury, the workpiece is unclean, may even fall out of the jaws. Sharp tool for clean surface on the workpiece, faster work. I am thinking whether I should get myself a CBN grinding wheel. Greetings Günter

@PENFOLD1962 8 лет назад

Hi Martin, A very nice and concise video mate. I also bought the exact same Gauge sharpening jig but not been able to fix it to my grinding table. I'm pretty excited now after seeing you use it. Sharp tool's at last lol... PERFICK mate 👍

@joness11ut 6 лет назад

Been a subscriber for a while but so glad I found this video. I am just a beginner and have the same bench grinder and will be buying that jig, think I have found it (£65 for both setups). I am SUCH a beginner I only have a 2nd hand lathe and NO gouges yet as budget it tight, but I will be getting the sharpening and extraction in place first otherwise I’ll end up grinding with blunt tools in a dusty garage

@busterwest1644 4 года назад

Thanks Martin, I agree with Mike ( who I also watch) I have seen lots of sharpening videos using verious Very expensive jigs but I need to sharpen by hand. Jimmy clewes turns some upside down and uses a sanding belt, so, like woodworking lots of different "styles" I have a similar grinder, and sharpen by hand so your instructions help.. many thanks

@leksey7870 8 лет назад

Good fixtures for sharpening. Like!

@leksey7870 8 лет назад

Summer, lost in the country. Good Luck To You Martin.

@barnowl1950 Год назад

Brilliant. well explained.

@kevbryant7199 2 года назад

Eyup Martin I just watched this video as I have a few of your others. I had to laugh at the "removable err stick" Ihave the same unbranded system. I call it the sliding in and out thingy only I changed my tighteny up knob thing for an Allen key. Great and informative video buddy thanks. Stay safe.

@More-Space-In-Ear 6 лет назад

You can’t say it enough to beginners to get your chisels sharp...even sharpened enough to shave with......it makes turning an even better experience.....👍🏼😊

@Krispitt 8 лет назад

Great video Martin. We have the same sharpening set-up in our little workshop, even sounds like we bought the slidey thingy jig from the same guy too. Simple, easy to use and does the job. AND it was affordable!

@PaulLockwood 8 лет назад

Great video Martin. I bought the hobby grinder for Axminster and not too happy with it so only been using the Credit Card which so far has done well. I also got the fingernail jig off ebay (retured engineer) so probably the same as you have. I found it fit sperfectly for the bowl gouge (still need to raised grinder by a little) but for my spindle gouge it doesn't seem to be right. Certainly interested in the flat jig you have which I will now see if I can find.

@drewmcewan2998 8 лет назад

Great video Martin. I bought the self same jig from ebay, but I think it was a friday afternooner. The platform was lying out by over an eigth in the width and then I lost the slidy in and out thing. So I ended up with a trugrind, does the same thing just more expensively. But a good explanation and well filmed. Drew

@gregdykes8832 8 лет назад

Glad i've got the pro edge system, couldn't be doing the slidey in and out bit...

@royothebuzz Год назад

Very helpful, Cheers

@davidholliday5063 8 лет назад

Hi I have the same setup as you but im going to order a CBN wheel this week from Woodturners Wonders from the US

@louisjcharlett683 5 лет назад

Refreshingly straight forward.........it ain't rocket science.

@T67Moon 5 лет назад

Very nice and informative, do you have the measurements for the slide thing?

@rogerdirkx.1679 3 года назад

Martin, I really like your videos. I’m just getting starting turning and your videos are very helpful. You explain the processes very well, it’s easy to grasp what your doing. I was very interested in your grinding and sharping video. I’m in the process of building one of my own. Is there anyway you could send me a full picture of the flat adjustable jig attachment for grinding the scrapers. Thanks for your help. I’ll be watching. Roger D.

@rogerdorsett3753 8 лет назад

Great video do you always use a swept back grind or do you still use a traditional grind as well.

@tompalmer334 8 лет назад

nice video Martin with your u-tube clout I am sure one of the CBN wheel manufactures will spout you a couple one 80 and one 180 grit you will be a amazed you have a good technique to your sharpening however a wheel from the CBN variety will never ware out and the edge is so good most advancement since HSS was invented for turners

@MovingTargetOne 2 года назад

Haha nice tshirt xD I take it for bowl gouges with a different angle of flare you would adjust the fingernail jig grip placement? I'm awaiting arrival of a bench grinder and similar sharpening jig

@hakimschmitzl1361 8 лет назад

Why you don't use something like tormek? Thanks for sharing your technique

@paulmcgrath3159 8 лет назад

Great video Martin, I have the same jig and pleased to watch someone that knows how to use it! Haha I need to work on the full fingernail as I must have quite a bit of material to get off first as it's just an Axminster standard grind bowl gouge. I have seen Robert Sorby do sell a fingernail shaped bowl gouge but I must be able to get mine down to that shape? Thanks a lot, Reece!

@paulmcgrath3159 8 лет назад

+Martin Saban-Smith Thanks Martin that's great I'll have a go tonight! Take care

@timhyatt9185 8 лет назад

sharpening is one of those things that if you ask 10 different turners, you'll probably get 10 different answers.... Don't think anyone can fault your methods here. When I first learned in my grandfather's shop, we did them by hand with a file and stones.. :P it works, but it takes up a lot of time that would otherwise be spent turning!! The jigs are HUGE time savers and let you get reproducible results every time.

@neilmason245 7 лет назад

Hi Martin, nice video! You don't happen to have the details of where to purchase the jig! Looks great and as you say some of the other options are very expensive!

@markhollingsworth3097 3 года назад

www.ebay.co.uk/itm/133182236355

@masterninjahda 8 лет назад

Cool video Martin. Thanks for that. I'm sorry if I missed it, but what is the rpm on your grinder? All I have is a high speed grinder, and don't really want to buy another grinder, if I don't have to. Can I sharpen with a high speed grinder? I've read that it's not advisable because it can take off too much of the tool and heat the tool up too much. But then others say yes, just use VERY light touches. Do you have any advice?

@PREDISGOD 8 лет назад

Hi Martin! Another really useful video! Do you have a way of "finishing" the edge, or of polishing off any micro-burrs that come with grinding a tool? I only ask, as i was reading the Mrs P's whittling book and they were talking about grinding then finishing the knives and i wondered if there was a transfer across to lathe tools?

@PREDISGOD 8 лет назад

+Martin Saban-Smith thank you for getting back to me! You will have to get used to my silly, non-lathe owner questions haha!

@jeffoldham3466 5 лет назад

I have the very grind and have it set at the 23 degree position,,but im having the hardest time with it,,it seems like from the tip to the back of the wings there is a dip in it,,,do you thing the ellsworth jig would do a better job

@gilgrace1915 8 лет назад

My I ask what diameter your grinding wheels are? I have heard 6" will work, but it might leave some concavity in the bevel. 8" is preferred I hear, but a new 8" low speed grinder is not in the budget. :(

@tweakerkid 3 года назад

The grinder in this vid is 200 mm, i did hear some prefer the 150mm because they prefer the concave curve, this is the reason some dont like the Robert Sorby systems.... no curve.

@msabansmith 3 года назад

The grinder in this video is 150mm, not 200.