I know this was done about five years ago but brother thank you so much for posting this video. I went through a set of bearings on a brand new clutch. Bill only got one run out of it, and the bearings were destroyed because it had too much play so now I know I got to buy some shims and shim it like you did to fix the problem you’re amazing bro God bless you and thank you so much for your help.
You just gained a subscriber with this video brother ! Very informative unlike other channels. Please keep these types of videos coming. We ( My Brother N I) purchased Losi 8ight's ( Buggy n Truggy) last year. Time for an upgrade in the Spring. Again, Thank You rajaa ;] Much appreciated !
Just got a new Novarossi Bonito (21-7XLB) in from an Italian vendor. I see what you mean about the Novarossi shafts being just long enough (short). I didn’t need any shims on it. My previous Novarossi mills were a bit longer in this regard, but those old novarossis are 8-10 years old now.
Wad -Up, People.... I LOVE it.. Love your Channel. Very refreshing, you have a fantastic outlook and are a true Humanitarian. Whether religious or not - i dont care - You are what the Planet needs! in life AND RC! Keep up the Good work. and Maaan! - you can DRIVE. M-mmmm I'm over the pond in England UK, Lorry Driver. got into RC via Tamiya Sand Scorcher - the old days in 1979 got a re-re Scorcher and nearly finished 1st 1/8 Nitro kit - Ansmann Kryptonite. Ha ? whats that? you might say..... well a bit later maybe who knows?.......got some pics of a few engine bits that might need your opinion on if you can fit it in on your list?
Thanks brotha, man you talking old school I love the Tamiya stuff. I had a few in my days, just let me know what you need I got you. If you can do a video of those old engine I would like to see them
Man I order the reds racing quattro 34mm clutch for my losi 8ight ? my questions is what bell I need has to be vent bell for this clutch can I use my stock bell ?
I love it how you say Change back to nitro 😂 Why not tell it like it is & say You had to build a new car & could only usr the diffs, arms wheels & spoiler
I feel like such a noob.. but, what is a collet and why/how is it used? I’m rebuilding a pretty clapped out savage x right now and the clutch pads are out and springs are broken. No shims or any hardware in sight. If you can point me in any sort of direction.. Thank!! Awesome videos man!!
Great info. I have a question if you have time. I just got a losi 1/8 buggy and picked up a new .21 Novarossi. What do you suggest for a clutch? I was looking at the nova buggy clutch. Thanks. Joe.
I like the novarossi buggy clutch but i think the clutch bells are a little to thin, the reds is a great clutch and very easy to adjust. the standard losi clutch setup is nice also i just didn't like there pins that hold the shoes in. all of the clutches you can't go wrong with but I would suggest going with a 4 shoe clutch system, here's a video I did on 3 shoe vs 4 shoe clutch systems. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-3se509mdEFw.html
rajaa111 have u ever herd or seen of anyone shim before the collet ..i either had to shim befor the collet cause if i did it after the clut h my flywheel barley reaches spur gear ?? any advice
Yes I shim sometimes before the collet if I need to move the flywheel away from the crank case, I’m not understanding what you mean by barely reaches? Either shim before the collet that will move the flywheel forward away from the crank case or try with no shims that will move the flywheel back towards the crank case
hey have u ever herd of a flywheel spacer ?? it goes on the crank shaft b4 the flywheel cause i run one on my alpha or should i just use shims after flywheel
Check out my vid with incorrect shimming. Then after 20 attempts using a new werks clutch and reds vented bell. I got it down on the second vid. Check it out.
surrounded by your neighbor houses and you are running your rc car as they are not living people inside them. Listen my friend, i never started my rc in my neighborhood...it is just so bad acting like this
What are you talking about I bet they run their weed eaters and lawn mowers and his rc car is no louder so why would his neighbors care he's minding his own business I will never understand why people walk on egg shells for people .