The "cheap" short shift kit on ebay and amazon, for the Porsche is a great option, but it does have a side to side slop. This slop can be fixed with a shim washer. The repair can be made with the shift kit in the car, so if you already installed the short shift, no worries get a shim and tight that right up!
Use a feeler gauge to measure the gap and get an estimate of what size shim you will need, loosen up teh pivot bolt, slide it back (don't take it all the way out), slide in the shims, tighten up the bolts and boom! no more slop!
The shims are M10 and they will need to be the .1, .2 .3 .5 mm versions, no thicker than that
The short shift kit: amzn.to/3Qb0sdS
The shim washers: amzn.to/40dPZ66
(affiliate links)
All Rights Reserved
zipzapdiy.com
Every repair situation is unique. ZipZapDIY cannot guarantee that your repair will be the same as depicted in this video. You should use this video as one information source of many, and you use this information at your own risk. Any tools, parts recommendations links used in this video must be verified by you to be applicable to your situation. ZipZapDIY cannot be held liable for any results from your improper use of tools or repairs. ZipZapDIY highly encourages you to seek out multiple sources of information regarding the repair depicted in this video. There is no warranty expressed or implied warranty or guarantee that you will experience similar results. You are solely responsible for the safe use of tools and equipment during your repair.
16 сен 2024
