Should You Convert Your 883 to a 1200 or Big Bore 1250/1275?

Подписаться 68 тыс.

Просмотров 192 тыс.

50% 1

If you have a Sportster 883 you might be considering converting it to a Sportster 1200, but there are other options out there that would would allow you to gain more power for the same price. There is no cheaper horsepower gain on the market than a big bore kit for your Sportster 883 or Sportster 1200. Harley performance doesn't have to break the bank and the aftermarket has some great options. If you're thinking about a 1200 conversion kit for your Iron 883 a 1275 kit may be just the solution you're after.
SUBSCRIBE FOR MORE ru-vid.com?sub_...
See why you might choose a Big Twin over a Sportster!!
Don't Get a Sportster, Get a Big Twin • Don't Get a Sportster,...
Random and Funny Videos!!
WEEKND OPs Playlist www.youtube.com/watch?v=5HHmv...
Funny random motorcycle videos as well as informational videos!! / gixxerfoo
SUBSCRIBE FOR MORE ru-vid.com?sub_...
Links to all custom parts installed are listed below!!
Motorcycle: 2016 Harley-Davidson Sportster XL1200CP (Sportster 1200 Custom)
• Harley-Davidson Sports...
Custom Parts Installed:
LED Headlight amzn.to/2LY4NA4
LED Bulbs Front Signals amzn.to/32PjpIT
LED Bulbs Rear Signals amzn.to/2OaqP5j
Smoked Out Turn Signal Lenses amzn.to/2Oaz41m
Vance & Hines Twin Slash 3 slip on exhaust amzn.to/2O9mqQ8
Screamin' Eagle Heavy Breather air cleaner
Vance & Hines FuelPak FP3 amzn.to/2M0tV9r
Harley-Davidson Reach Seat
Harley-Davidson Chrome and Rubber Collection grips
Drag Specialties Offset Clevis Footpeg Conversion Kit
Aftermarket Chrome Foot Pegs amzn.to/30C68SA
After Market Chrome Shifter Peg amzn.to/2LBTTAZ
Aftermarket Chrome Crash Bar amzn.to/308QFhg
Aftermarket Detachable Back Rest
Aftermarket Docking Hardware For Back Rest amzn.to/32RhZ0j
Harley-Davidson Air Flow timing cover
Harley-Davidson Air Flow clutch cover
Screamin' Eagle spark plug wires
Screamin' Eagle spark plugs
Black Front Axle Covers amzn.to/32TrSe1
Flipped Down Stock Mirrors
Motorcycle: 2017 Harley-Davidson Sportster XL1200X (Sportster Forty-Eight)
• 2017 Harley Sportster ...
Custom Parts installed:
Harley-Davidson Factory Security System
LED Headlight amzn.to/2OcFih2
LED Bulbs Front Signals amzn.to/3086pQV
LED Bulbs Rear Signals amzn.to/34VFfw9
Smoked out turn signal lenses amzn.to/2Oaz41m
Vance & Hines Twin Slash 3 slip on exhaust amzn.to/2O9mqQ8
Screamin' Eagle Exteme Billed Air Cleaner (Black)
Vance & Hines FuelPak FP3 amzn.to/2M0tV9r
Harley-Davidson Burst Collection Foot Pegs
Harley-Davidson Burst Collection Grips
Harley-Davidson Burst Collection Shifter Peg
Aftermarket Black Crash Bar amzn.to/32MsUZq
Screamin' Eagle spark plug wires
CNC Front Axle Covers amzn.to/31GGE7W

Авто/Мото

Опубликовано:

29 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 488

@GixxerFoo 4 года назад

The weather has been cold and rainy so I thought we'll just move the party to the garage... please leave a comment, like and subscribe! Hope you enjoyed the video!

@BigAl53750 4 месяца назад

I live in Australia and bought my 1997 883 Sporty from a friend back in 2009, for a good price and rode it around for a few years until I got it set up how I like as far as suspension etc. I bought the 1275 kit from Hammer Performance, along with a more capable clutch, the oil pump drive gear they make, the CNC machined ignition rotor they produce, and I put in the 2007 upgraded oil pump as well. I used the standard heads and the 2-1 exhaust that came on the bike when I purchased it. I had already had an S&S air cleaner setup installed, which was a massive improvement over the factory one. I can’t speak highly enough about Hammer Performance! They are outstanding people to deal with! The difference in the performance of my Sporty is AWESOME! Not only does the upgrade give me more power, I get much better mileage than I had. The guys at HP say this is due to the squish band producing a more efficient burn, which makes sense, but it’s way better than I expected. I now have a bike that is better balanced, so; smoother, but has bags more torque and power throughout the rev range that’s more than enough for what I want. It cost me just over $1500 (AUD), which means I haven’t spent more on the bike in total than I can reasonably recoup if I ever want to sell it. Which I don’t think will ever be the case. Hammer Performance is the BEST!

@trevorjameson3213 4 года назад

I just had my old solid mount 883 converted to 1200cc by a great local bike shop (A Harley only bike shop) that’s been in business for 35 years. Very happy with the results, huge power and torque gain!

@GixxerFoo 4 года назад

Hell yeah! Congrats that is awesome, a 1200 conversion almost doubles the power over the 883 cylinders. A good independent shop is one of the best places to take a bike!

@trevorjameson3213 4 года назад

@@GixxerFoo Thanks, man. Yeah and I just completed the 500 mile break-in, and then opened it up a bit. Far more power than I was actually expecting, tons of torque and it's crazy over 3500rpm. This one has the stock heads, but they did head work, new valves and springs, Andrews N4 cams (I think these are medium grind, labeled as "street/drag" 2000-6000rpm"), carb re-jetted of course, big sucker air filter, and fairly open slip on pipes.

@Onlyone10184 3 года назад

@@trevorjameson3213 what did they charge you for labor

@sportsgaming7215 Год назад

What’d you pay for the conversion after parts and labor?

@Arizona_Vineyard 6 месяцев назад

Yo! How much should I expect to pay for the service?

@simonkennedy6116 4 года назад

Considering how cheap second hand sportsters go for, this seems like a cheap way of building a monster

@GixxerFoo 4 года назад

That was my thought exactly, plus the 883 goes super cheap used and you don't have to tell the insurance company lol.

@simonkennedy6116 4 года назад

@@GixxerFoo And if it's the long tank with a different air cleaner, no one would even know it a sportster. Let alone a giant slayer

@GixxerFoo 4 года назад

@@simonkennedy6116 I've seen some Sportster builds where I had to do a double take. I've seen a few that almost easily pass for a Street Glide.

@craigpennington1251 4 года назад

Where I live, you do not see Sportsters for sale and when you do, they are expensive and just trashed.

@bobkinney2430 3 года назад

Exactly what I am thinking about doing, finding a used sportster 883....at a decent price. ..then putting the big bore kit on along with more customizing.

@Mr.McStache 4 года назад

Good information and definitely agree a must is a shop manual. As far as an independent service I visited several and until I found one that felt like they cared and knew what they were doing.

@GixxerFoo 4 года назад

Harley has an awesome shop manual, I was really impressed with the detail it provides when I bought mine.

@brooksstevenson8358 4 года назад

I love how you have aft on in the background. If you ain't sliding you ain't riding

@GixxerFoo 4 года назад

👍 l love some AFT, hoping to get to go back to OKC this year or at the very least see some racing on Fanschoice.tv.

@dingguscon235 4 года назад

2016 48 here with 1275 kit, 560 cams, stock 1200 heads, powervision, exhaust and intake....rips harder than my fxdls (110ci) with a pipe and heavy breather...a lot harder...but you really have to wring its friggen neck, but thats the fun part. +1 for hammer I worked with Dan on my setup and base tune, really top notch guys and extremely awesome service.

@GixxerFoo 4 года назад

That's awesome! They say the stock late model heads are pretty damn good as is. I'm planning on the same setup except with 570 cams. What compression ratio did you end up going with?

@alexanderbarth8320 3 года назад

Nice it reminds me of my younger years. It's great fun and I have been through the lot. 1200 conversion, cam's, Edelbrok heads a number of different carburettors and so on. All great fun but you are not getting back the money when you eventually sell up.

@GixxerFoo 3 года назад

Couldn't agree more! You can't go into it expecting to get your money back, I usually keep bikes I build and just get something else later on. Unless someone just happens to make an offer I can't refuse then I might be inclined to let it go.

@Cool_Rider25 4 года назад

thank you so much, this is question that i had for a lifetime! i thought i can only convert my 883 to 1200 and 1200 only to stage 4 that is unfair, thank you so much

@GixxerFoo 4 года назад

You're welcome, honestly the 1275 or 1250 is what the stage 4 should be. The 883 is same bottom end, cases and transmission. 883 just has smaller displacement cylinders, pistons and different cylinder heads.

@ghostdog1874 4 года назад

The main reason i bought my 2016 iron was because of the color compared to all the other sportsters . I put 500 break in miles on her , then called hammer and spoke with Arron for an hour on the phone . Placed an order for 1275 big bore kit and bought hammer Preformance air intake as well . While I was waiting for their kit my mechanic had my 883 heads ported here locally in CT. And I also bought a set of Andrews cams. Got everything put together and put 500 miles on it for the break in ,They sent me a map for my power vision From hammer performance.And I absolutely love the bike. Plan on having a Dyno tune done this summer at some point , The bike screams and I love it. Hammer performance big bore kit is best money I spent. End of story.absolutley love my bike !!!!!

@GixxerFoo 4 года назад

I'd say they are best on the market! I bet your Iron is a real sleeper now, people see an Iron and assume it's still an 883 lol. Best part is you still get the 883 price with the insurance company!

@ghostdog1874 4 года назад

I agree 100% Hammer is the best when it comes to everything Sportster ! , Arron and Hammer Dan are great to work with extremely Knowledgeable and willing to help. And honestly my bike is a very mild street build compared to what the guys at hammer build . My iron is probably around 88-90 horsepower. It’s a great all around street bike for me . But lol I already want more !!!! Thank you for the video , keep the sportster stuff coming . I’d like to know more adout your bike . I’ll subscribe now

@davidlee-rc6gr 4 года назад

Do you mind if ask what your total bill was, all in?

@Z1Nico 4 года назад

@@GixxerFoo right but if you ever got an accident and the insurrance calls an expert , he will see the modification and your insurrance Can refuse to paid..

@An_Enraged_Pig 4 года назад

I ride an 883 and live in CT also!

@03flhtcui 4 года назад

Good video. Oh...and nice Sporty by the way. Very tastefully done. Love that color scheme.

@GixxerFoo 4 года назад

Thank you! I appreciate the support and thank you for watching the channel!

@nocosofttailtommy 4 года назад

Get a 1200s low, like the video, been looking on what way to upgrade it,thanks 🤙

@GixxerFoo 4 года назад

You'll definetely enjoy the power that comes with it, be like a new bike!

@Carreidas 3 года назад

This made my mind up. Thanks for posting it. I will be picking up a late 2010+ 883 and give it some big bore love.

@GixxerFoo 3 года назад

You can make a 883 a monster, just remember to get the heads worked over for the on an 883. Even without the heads done you can still get up there in the power range!

@g44sarge 2 года назад

@@GixxerFoo IIRC...the gearing in the 883 transmission is a little lower than the 1200 tranny also!!

@GMCJay_lly Месяц назад

The Harley Sportster 883 and 1200 have the same transmission gears, but the 1200 has a different number of teeth on the transmission pulley. The 883 has a lower gear ratio than the 1200, which means it accelerates faster but has more difficulty at high speeds.

@missyfochtman4203 4 года назад

Shane again, i seen that number plate in the background with 58 on it! I used to race quads back in the early 2000's that was my number.

@GixxerFoo 4 года назад

That's awesome! What kind of quad racing did you do? I used to race flat track.

@missyfochtman4203 4 года назад

@@GixxerFoo flattrack tt

@jimjackson3245 3 года назад

Thank you for this! I didnt know this type of kit existed, especially for so inexpensive!

@GixxerFoo 3 года назад

Glad it was helpful! It's surprising at how inexpensive it for the gain you get from it too!

@jimjackson3245 3 года назад

@@GixxerFoo oh yeah! And I was actually really impressed with their site! I mean the UI isnt the best I've ever seen, but it is so comprehensive and they cover just about all the questions one might have. I'll definitely be ordering from them when I get back to Vegas! For the lowest level kit, you dang near double the hp and tq for well under a grand. Crazy!

@GixxerFoo 3 года назад

It's nuts! Lol yeah UI is a little lacking but they do that in house too. Lol not not bad for some machinists and engine builders.

@twinsmotogarage1866 4 года назад

Nice video! Hammer is having a sale soon. Really thinking about adding the 1275 kit to my Iron 883 build.

@GixxerFoo 4 года назад

Ahhhh l saw that too, l am wanting to go for the torque with the 1275 and the 570 cams. Those guys can hook you up with a package to do about anything you want.

@jamesonlee7611 4 года назад

What’s their website?

@bobkinney2430 3 года назад

Awesome information, as The other popular kit is the S&S Kit.

@GixxerFoo 3 года назад

S&S makes a solid kit and it produces good power, l wish they had the highlighted cylinders as an option.

@brysonwood8356 4 года назад

Leave the bottom end exactly the same and go at least to 1250 ci. You’ll thank me later... almost double the hp and definitely double the torque Andrews kit came with everything I needed. I opted for Cometic gaskets ($500.00 for top end and bottom end together) I also left my top end the same, but plan to shave about 40thousandths and better cams

@GixxerFoo 4 года назад

You can't beat Cometic gaskets, the factory Harley gaskets sometimes fail with increased compression. Sounds like you have quite a build going.

@missyfochtman4203 4 года назад

Just subbed bro, i like your laid back style. I have the 1275 kit went with the bathtub heads an used the fueling 505/515 reaper cams, also used a Dynatek DSPT cdi box. My sporty is vicious! First, second an third it will carry the front wheel on a hard shift! I love when guys say nice girls bike, lol! A drunk guy at York pa. Bike night last year. Said that i had a girls bike. Till he got smoked by it! Some fat dude on a softail! Lol anyway ride on bro. I be watchin'🤙

@GixxerFoo 4 года назад

Damn you built a monster!! What year is your bike? Did you do any head work with those cams?

@missyfochtman4203 4 года назад

@@GixxerFoo this phone keeps putting me down as my wife, but yeah my bike is 2005 carbureted. I went with a 46mm mikuni smooth bore. Its a 10.5-1 set up, i went an smoothed up the heads didnt really hog them out. But the 515 reaper cams cam be ran with the stock valve train. I get a little money saved im going with hammer performance 600 race cams. Need shorter valves for this though. It should make a little over 130hp without the spray. Im installing a sneaky pete's nitrous kit 100hp wet shot! I dont like a motorcycle if it dont scare me a little! Lol

@GixxerFoo 4 года назад

@@missyfochtman4203 That's how l like my bikes! Damn you're gonna go with 600 lift cams?? Those are pretty extreme, is this your street ride?! Holy crap, yeah no doubt you're gonna be up there in the horsepower. I'd rather have a built Sportster than any other Harley, l do everything with my bike. City, touring, you name it.

@Ragnar215 Год назад

The Harley dealership is insanely expensive but the one thing I do like about them is they do you know how to fix your bike I can’t speak for everyone else they do get it done very well but 130 an hour on most of things on my bike, I can do myself even without know how a quick RU-vid search and you can do most of the work to your bike yourself, but when it comes to engine and cam work I will absolutely leave that to the dealership or find a good motorcycle shop near me, which I may do all of this next winter time at this place I found called get lowered.

@benhager2559 3 года назад

I think another option, that is worthy of discussion, is using a buell xb12 engine, you can get them reasonably cheap, about 1k for a good motor, tear it down, you have the jugs, the pistons, the heads, the cams, the lifters, you get the crank and rods ( the buell bottom end is significantly stronger than the sportster engines bottom end) ,, you do have to get the original sportster case machined to accept the buell bottom end, ( its reasonable, lots of shops are familiar with the conversion) , I think you also have to use some of the primary pieces from the buell engine as well,, but for the total cost, if your handy with a wrench, and have worked on these engines, it's easy to do I think. For well under the price of some of these kits, you can build a 100hp, 85ft lb engine, that revs happily to 7k, without destroying the bottom end. With some more money, if it's in your budget, for about 700 bucks, you can get the 110hp big bore kit for the buell, use it on your sportster build, and you can have a 110hp monster, and for close to the same cost as some of these kits are that include the heads and everything. On a side note, even staying with the sportster spacific kits, the bottom ends will never be as capable, as the buell bottom end. I forgot to mention also, that with the buell engine, you also get the upgraded, and stronger oil pump, and the drive gear ( the buell one is an excellent piece, many write ups on doing a sporty to buell oil pump conversion) ,, for the price for a cheap buell engine, you get tons of upgrades, that would cost you so much, if you just sourced the parts individually. Just a thought, but this is the other ( and in my opinion, the better option) for building a reliable, sleeper sporty. Great video as always/ fist bump

@GixxerFoo 3 года назад

Thank you! Yeah Buell engines are awesome! They have a few differences like cam numbering to be aware of but they do have much higher quality parts. It doesn't take much to get those motors into a Sportster frame. Although l wouldn't tear a salvage Buell apart if it had a good chassis. I'd love to get a Buell XB12R Firebolt... l regret not picking one up years ago now.

@jandincheatwood4108 2 года назад

@@GixxerFoo man they are super fun and you could find one pretty easy nowadays. I’ve got an xb12r and an 1125cr. Looking at getting an xb12scg rn.

@robhulgan9149 4 года назад

I just got my 1275 kit , 570 cams, smash head work to 883 heads, 10 to 1 30 degree reverse some pistons and all the supporting components from hammer delivered to my door for just under $3000 with the xlforum member discount. Aaron told me, depending on the exhaust, this kit would easily break 90 hp. And like you mentioned without even winding it up too crazy. I’m expecting close to 100 hp.

@GixxerFoo 4 года назад

That's a sweet setup! I love those 570 cams, those things have an awesome power curve.

@Partyatmosphere 4 года назад

Seriously? $3000 for less than 100hp. Why not just buy a fast bike in the first place?

@RCTUN748 2 года назад

@@Partyatmosphere It's true that there are many fast and cheap bikes, and it's not hard to find one with high power and high rpm, but you can't find one that is more handsome than Harley, highly customizable, and can satisfy over 100 horsepower with extremely low rpm. The hammer kit Harley can even easily achieve 10 seconds from 0-400. Considering the fact that it can have high power and low rpm with such a handsome posture, the answer is, only Harley.

@stee-vo3332 4 года назад

You might have mentioned this in another vid, I don't know, but if you're upgrading for power make sure you upgrade suspension and BRAKES! Maybe stick on a fork brace and steering damper aswell,if you're going round twisty roads. The OE parts just aren't up to those kind of horses.

@GixxerFoo 4 года назад

I actually didn't mention that! Great thinking though! The older models brakes and suspension were not up to the task at all. 2016 and newer with the updated suspension and brakes are awesome, well compared to earlier years but there's always room for improvement. The 2011 and up Custom is hard to find a fork brace for with the wide front end, I have looked everywhere and they fit everything but that model.

@chrissmith7669 Год назад

@@GixxerFoowhat would a good brake upgrade be for a 2003 Sportster? All New H-D parts or the Japanese parts that seem to be pretty popular?

@LatinoRider 4 года назад

I will go with the Hammer kit!

@GixxerFoo 4 года назад

It's hard to beat! I've looked at some others that are floating around out there like from NRHS and Revolution. They just aren't as good in my opinion and they don't have the options Hammer has. More expensive too from some companies for only a 1250 kit.

@jodycornelius8258 4 года назад

My 09 XL had all the bells n whistles when i bought it. Insanely fast bike. I absolutely love it. Very reliable bike.

@GixxerFoo 4 года назад

What model Sportster did you get?

@jodycornelius8258 4 года назад

@@GixxerFoo 2009 883 sportster XL. EFI, camshaft, open drag pipes ( when i first got it) now some mild baffles, reprogrammed ECU and im sure at a minimum 1200 kit. I've already hurt a Trackhawk owner's and a Hellcats owner's feelings with just a half throttle pull. It had 12k miles when i got it 2yrs ago it at 18k miles now. I just maintain it like it supposed to be maintained.

@GixxerFoo 4 года назад

That's awesome they will last forever that way when you take care of them like that.

@jodycornelius8258 4 года назад

@@GixxerFoo I've been a mechanic since 1984. She only gets the best.

@GixxerFoo 4 года назад

@@jodycornelius8258 That's what l like to hear! I'm huge on maintenance!

@topherdalrymple6535 Год назад

I have a 2005 883XLC that i bought two years ago and put 10 thousand miles on. Getting it converted to 1200 this winter. Looking forward to spring 2023.

@HardRockFairytale 5 месяцев назад

How is the bike now? :)

@topherdalrymple6535 5 месяцев назад

@HardRockFairytale wow I wrote that awhile ago. Bikes great. Rips, handles, no issues. Tons of fun.

@HardRockFairytale 5 месяцев назад

@@topherdalrymple6535 sounds great 👍

@217saleen 3 года назад

I have done the Hammer 1275 but went all out with cams and porting on heads. It will turn your sporty into a monster! I am right at the 120HP mark and you do loose some down low drivability but people are amazed at how hard it pulls away. I have blown some of the big twins away light to light. Need to build my RK up next and wake that 103 up. Depending on how hard you are on the bike after the Hammer kit goes in belt life is decreased a lot but I still prefer it over the chain for ease of maintence.

@GixxerFoo 3 года назад

Hammer is where it's at and l am jealous of your numbers! Damn all out and over 120 on a Sportster! Might just still eat that RK... what year is your Sportster?

@217saleen 3 года назад

@@GixxerFoo Definitely look into doing that upgrade on your bike you will love it!

@217saleen 3 года назад

@@GixxerFoo My 2005 is a absolute blast just remember to price out all the other components that will make and hold all the new power, If you plan to keep the bike the expense is worth it.

@GixxerFoo 3 года назад

I've installed several for friends and they love them, tuning is key! I would love to do one on mine too, lol my wife takes all my money 😆😂🤦‍♂️.

@GixxerFoo 3 года назад

That's just it! Your not doing this to resell, it's a deal to keep and enjoy!

@BerserkerNick 4 года назад

I put the hammer performance 1275 kit in my bobber, bigger cams, roller rockers, adjustable push rods, bee hive valve springs, bigger valves, rejected the carb, and built my own custom exhaust, my bike absolutely rips

@GixxerFoo 4 года назад

I bet it's an absolute handful now! What cams did you go with?

@BerserkerNick 4 года назад

@@GixxerFoo andrews v6 cams

@GixxerFoo 4 года назад

@@BerserkerNick Damn those are some pretty aggressive cams aren't they?

@BerserkerNick 4 года назад

@@GixxerFooit's like riding a grenade laucher

@GixxerFoo 4 года назад

@@BerserkerNick Lmao, so you better be ready when it comes on. I bet you surprise a lot of people with it too.

@My45ToYourThroat 3 года назад

Little over a week ago I have purchased the 100+ horsepower 1275cc kit for my 2018 Iron 883. Sent the heads out 5 days ago. Looking forward to bolting it up and getting the break in period started. Too bad I live in Wisconsin lol. Will update once I get it done and the winter wraps up.

@GixxerFoo 3 года назад

Let me know what you think of it! That's gonna rip when it's all put together, now's the time to get it all done so you can enjoy it in the spring!

@My45ToYourThroat 3 года назад

Ive got a good bit of the Iron 1275 break-in process done. The lope from the cams is awesome. Havent even gone half throttle yet, have to keep it under 4K RPM still. She rips with minimal throttle, and I haven't even auto tuned yet

@GixxerFoo 3 года назад

That break in process is excruciating to get through but it is critical to do right. I love Hammer's cams, they aren't as loud as a lot of Sportster cams with their ramp angle they designed. Did you go with their 560 cam?

@My45ToYourThroat 3 года назад

@@GixxerFoo Yes sir. They sent the XL 560 cams. Once I'm able to open her up, I'll get the full feeling of the Hammer 560 cams

@GixxerFoo 3 года назад

@@My45ToYourThroat Nice! With the setup you have those cams won't lose any bottom end, but you'll know when they come on real quick!

@johncraveiro2054 3 года назад

1200 cc is a Market sell,,,,,,883 cc started in '57,,and is still here,,,,it is a perfect bore and stroke, perfect motor, that's why its still here.

@GixxerFoo 3 года назад

It's a rock solid motor and design, the extra power of the 1200 is really nice though!

@rolandrodriguez3854 4 года назад

As a reference point my new stock '99 BuellX1 Lightning 1200 dynoed at 94hp torque 74. After Buell racing exhaust and power comander 101hp.

@GixxerFoo 4 года назад

Damn that's a pretty good gain with exhaust and a tune very solid.

@zachowens1412 3 года назад

The engines in the buells were not your run of the mill sportster engine. Buell did a lot to them. The later xb12s, xb12r, and xb12t has a 1203cc version that produced 103hp stock. I would love to get my hands on one of those.

@thakery5720 4 года назад

I notice that in the description there is a link to a video about maybe choosing a big twin instead of a Sporty.... I have both an '06 XL1200R that is now 'Hammered' out to 1250, and a '10 model Streetbob that is now 113" with reworked CVO top end that makes 130+bhp and 120+ torque. The Sporty is easier around town and for rides of ,maybe, under 150 miles - it also handle twisties much better due to the overall smaller size of the bike. I am 5'9" and a bit over-weight and find that if I am going further, such as hundreds or thousands of miles that the Dyna is the bike as it is more comfortable and handles speed better especially when loaded with camping gear etc. One trick all Sporty owners should look into is the bike's gearing.... especially if it is/was an 883. The primary gearing is so low as to make the engine revs very high at freeway speeds - and more vibes along with it. If you get a Hammer Performance 1250 or 1275 kit then the vibes lessen as the pistons leave the engine more balanced than the H-D stuff - look on Hammer's site and they explain it very well. Back to gearing - look on 883sportster.com I think it is and you can find bigger trans pulleys that sort the gearing out - I use a 32 tooth pulley on my 1200/1250 conversion and it leaves the bike cruising at over 90mph @ 4k rpm. It is not worth putting bigger cams in an 883 or twelve hundred (especially and 883/1200 conversion) without getting the heads ported as they don't flow enough for even the standard 883 or 1200's cams respectively. If you want power, go for the big twin but remember to replace the engine mounts as standard ones are rubbish - go to Big Bear Performance or Chopper Hauss ones though as all the others are just 'a Band Aid on an open wound' so to speak. For sheer performance the big twin is better, for fun it is the Sporty. As always folks, 'if you have to ask the prices Sir, then you cannot afford it' applies to most things ......

@GixxerFoo 4 года назад

Very well put, Hammer has done some serious engineering in their products. I would hazard to guess they might know that Evo Sportster better than Harley.

@adamak47miller90 4 года назад

I have a 2015 forty eight and I put the S&S 1250 big bore kit with cams. Then I put screaming eagle stage 4 heads on with cobra pipes. New S&S adjustable push rods and I did have it dyno tuned. 107hp and I did all the work my self but the tune

@GixxerFoo 4 года назад

That's frickin awesome!! Doing it yourself is the best way so you know it's done right! I bet that bike absolutely rips, S&S makes some super quality products.

@adamak47miller90 4 года назад

@@GixxerFoo Yes its almost to much and with the 2.2 gal tank I only get about 70 miles on a full tank when I drive normal. I have been a small engines technition for a long time and this bike was the first fuel injection bike I have owned and worked on so I learned a lot about it.

@GixxerFoo 4 года назад

@@adamak47miller90 My wife has 48 and it's stock other than a tune, exhaust and air cleaner. It get's about 70 miles to a tank too, that's pretty awesome for your bike to get that with all the mods. Fuel injection isn't that bad to work on, what tuner did you go with?

@raybrensike42 Месяц назад

The worst thing about a stiffer clutch spring how hard it is to pull the clutch lever. I bought a used 883 converted to 1200. The seller said Harley did it with their own parts. That clutch lever is so hard to pull. The first time, I said, "Come on Harley, are you kidding me?" This was right after 38 years on classic BMW K bikes. Even the brake lever is, well it seems like a joke to me. What in the world?!

@GixxerFoo Месяц назад

The stiffer clutch springs are supposed to squeeze the clutch pack hard for added power to keep it from slipping. It's really bad on the bigger bikes with the lever effort.

@ojaichuck 4 года назад

I had this done to my 2003 sportster by modesto harley. Had nothing but problems after. Sold the bike a year later and never looked back.

@GixxerFoo 4 года назад

What brand of kit did you use? I know Hammer stresses really hard to do it yourself and install it to the letter by their instructions, especially how it's broke in.

@ShaunFritz Год назад

The Harley screaming eagle kit doesn’t make as much gains because it doesn’t include cams… so do cams as well and get more power. S&S hooligan is a great pick as well

@chrissmith7669 2 года назад

My newly acquired 883 is going to get a conversion to 1200 by boring it out. I want the totally stock from outside look. Nothing to give away it’s putting down way more power. Lol. Not that it needs more power.

@dannyhall5883 3 года назад

Like your video and thanks I just have a problem with Hammer Prefomance. Followed instructions and wound up with scored cylinder. They said it was my fault because I didn't retard the timing like their web suggestions said. No wear did it talk about changing the stock timing in the paperwork that was sent to me with Prefomance piston kit. They had their money and could care less for the home installer. Wish I still had them I would show you photos. I've be a mechanic for many years and had no thought to change stock timing by 7 degrees after installing larger pistons.

@masterofnonetv8361 4 года назад

I went with a hammer 1250 kit, ported my heads, upgraded my clutch, k&n ram air and a thunder header. I have some thunderstorm heads and a 42 mm flatslide carb i want to put on next. That's my sporty trike in my avi.

@GixxerFoo 4 года назад

I can honestly say I have never seen a hot sporty trike, what's like riding a trike with kind of power?

@masterofnonetv8361 4 года назад

@@GixxerFoo It will move! Obviously doesnt handle like a bike anymore so you have to watch the turns but it's a lot of fun! I'm a paraplegic so I adapted it so I could ride it again. All my brakes work off the lever, it has raked trees, air ride on the rear and a pingel electric shifter! I can pin the throttle back and slam through the gears without letting off the throttle! Its awesome! My son and I did all the work.

@GixxerFoo 4 года назад

@@masterofnonetv8361 That just makes that bike even more special! That's awesome that you're riding and having a good time out there, especially on a hopped up trike. It's really tricked out, I can't believe you even have air ride on it!

@masterofnonetv8361 4 года назад

@@GixxerFoo yeah I had to lower the rear some to make it easier to get on and off but I didnt want to make it a rough ride by putting like some burley slammers on it so I bought a kit off ebay. The compressor and all the wiring if under the rear fender so you cant see it. People really get a kick out of seeing me ride it with a wheelchair hanging off the back of it. They always chat me up at stop lights and then I leave them in the dust!😂

@GixxerFoo 4 года назад

@@masterofnonetv8361 That is awesome, much respect to you for everything you've done to continue to ride. The Burly slammers give the bike a slick look but my gosh they ride awfully rough.

@craigpennington1251 4 года назад

I really like how the 2004-2008 883s look and how they ride. They are ok but do need more power. I was thinking the big bore kit plus a very hot cam to boot.

@GixxerFoo 4 года назад

They made some good looking 883 models in from 04 to 08, converting to a 1275 will double the power on an 883.

@craigpennington1251 4 года назад

@@GixxerFoo That's the goal in mind. Then it will be a super blast to ride out here. Plus it will have the punch needed when you need it most.

@GixxerFoo 4 года назад

@@craigpennington1251 oh you will love it! Plus the insurance company still has the 883 vin number lol.

@craigpennington1251 4 года назад

You're welcome

@craigpennington1251 4 года назад

@@GixxerFoo That is a plus for the good side of things. Insurance is high on most but some other things, pretty low really. It all depends on who you go with.

@shawn9878 4 года назад

Still breaking in my wife's 1996 883 conv. Did the 1275 kit with 30* rev.dome pistons . They did the heads. Let me tell you the heads are where the magic happens . Especially if your doing a hotter cam. The energy one clutch is plenty good they use Alto clutch fibers .can't wait to get it above 3000 rpm

@GixxerFoo 4 года назад

I am jealous to say the least, the break in period is the absolute worst. You spend all that time building it and you have to baby it for what seems like forever!

@shawn9878 4 года назад

@@GixxerFoo torque is crazy now, I got there black Friday deal with everything included .I mean everything all the way to new spark plugs was less than Harley offers for the 1200 kit .

@GixxerFoo 4 года назад

@@shawn9878 Holy crap!! I totally missed out on that! I didn't even think to check for a Black Friday sale with them, you got one hell of a deal! I priced out what you did with the heads done as well and it was like over 2K. Hopefully they do it again this year! I want to make some big torque with mine.

@shawn9878 4 года назад

@@GixxerFoo best bang for the buck it's getting your 883 heads matched to the 30* pistons Arron is a stand-up dude . If you do the 1275 kit do the heads for the revs some pistons not the flat tops do it ones and be done ...kinda like ripping a bandaid off lol

@GixxerFoo 4 года назад

@@shawn9878 I really like Arron, he's pretty awesome and straight forward. I have the late model 1200 heads so I've been back and forth between having them rework them or just stick with the flat tops. The more I think about it and what you've said I think the reverse domes may be worth it honestly.

@itiswhatitis321 6 месяцев назад

I have a 883 with a 1275 kit in it. Also I have a new clutch in it and drag pipes and I changed the sprockets for top end on hwy. I roll at 135mph on the highway and still have some torque. I'm putting the turbo kit on it next and that'll be a extra 60 to 80 hp. It will wear out those big bikes. I've owned all kinds and those 883 Sportsters are bad to the bone to build.

@JNigelReese669 3 года назад

Thanks Man!!! Subscribed...

@GixxerFoo 3 года назад

Thank you for the sub! I hope the videos are helpful!

@forsterfry2091 4 года назад

Great video

@GixxerFoo 4 года назад

Thank you! I appreciate it, what bike do you ride?

@paulygood6665 4 года назад

Cool you had dirt track racing on your TV

@GixxerFoo 4 года назад

I love some AFT racing!! Can't wait to get this season started finally!

@paulygood6665 4 года назад

I do a little Motorcycle speedway racing over here in Auburn California. Our track is still shut down because of the COVID shit

@GixxerFoo 4 года назад

Speedway is awesome, l always wanted to try it but we don't have any suitable tracks for it.

@PkwyDrive13 4 года назад

The 1275/1250 kits from hammer are also $300+ more...BUT after paying harley for labor, it's probably less expensive after all

@GixxerFoo 4 года назад

Their kits a lot cheaper than the Screamin Eagle Stage IV, for what Harley wants for their kit Hammer will get you over 100hp.

@aswracing1 4 года назад

It's not really $300 more, because there's more in the HAMMER package. For example, you get a full Dynojet Powervision tuner, you get a full extra plate clutch kit, etc. So it's not apples to apples.

@BadCompany413 Год назад

I’m an ex MC guy. 1%er.. I’m pretty short too. I love sportsters! You can do anything to them to me their kinda like a VW bug. I used to fly and was able to keep up no problem. Like I said, I am a short kat. I make them into choppers now for people and their affordable as well. Right now I’ve been just doing custom leather seats I ended up getting hurt. Just found your channel! 👍🏽 hey if you or someone you know is interested in a leather seat give me a shout. I sell them probably for half the price of others. I like to make things so anyone can look good. I’m working on a wall of them to put in an art museum type place. It’s leatherwork so it can go in there but be sold as art. I have to give those people 50% that’s also why I don’t charge much. Depends on weather you have the base (hard plastic/metal) seat or need me to get one..

@mminton88 2 месяца назад

I did the hammer 1250, just amazing difference in power, you need to upgrade clutch or she’s gonna slip

@GixxerFoo 2 месяца назад

Clutch upgrade is highly recommended, even with the 1200. It's pretty much mandatory on the 883 since I believe they use one less clutch plate or two.

@rider14mcd63 4 года назад

Love Sportsters, I had to let it go though for a smoother ride. My Roadking ain't as fun though.

@GixxerFoo 4 года назад

Road King has gotta be like riding on a cloud compared to the Sportster. The new suspension on them is much improved but l'd like to try some aftermarket suspension.

@rider14mcd63 4 года назад

@@GixxerFoo yep, I agree. The slammed look is cool but a set of ohlins would be very good.

@GixxerFoo 4 года назад

@@rider14mcd63 Ohlins shocks make them ride like a dream!

@jedifabiano930 3 года назад

@@GixxerFoo Revo fit even older 2005 and earlier, well worth it!

@joogullae3456 3 года назад

Love your videos manm

@GixxerFoo 3 года назад

I appreciate that!

@joogullae3456 3 года назад

@@GixxerFoo I have a 2004 1200 sporster custom, and a 2006 fat boy with the tc 88, watched your videos on how the TC needs to get the tensioners upgraded? You have the best harley info out there. Thank you.

@GixxerFoo 3 года назад

@@joogullae3456 Thank you! We appreciate your support over here!

@RCTUN748 Год назад

I love HP 1275 kit + 570 cam.

@dominiccoscarelli305 4 года назад

Really helpful. But I'm starting to want to get something with longer range. 100 miles to a tank isn't great for long distances.

@GixxerFoo 4 года назад

What size tank do you have? My wife's 48 can eeeek out 80 miles with the 2.5 gallon peanut. My custom has the 4.5 gallon and l can get over 150 miles out of it.

@joealvarez5171 4 года назад

Not worth it putting a bigger tank on there?

@GixxerFoo 4 года назад

@@joealvarez5171 My wife loves the look of the peanut tank, but you can pick up a tank fairly inexpensively if you shop around.

@missyfochtman4203 4 года назад

Put a walnut tank on your sporty, them peanut tanks are bar hopper tanks man

@GixxerFoo 4 года назад

@@missyfochtman4203 My wife loves the look of the peanut tank, so l get to carry an extra gallon of fuel for the long distance trips. Learned the hard way gas stations aren't always evenly spaced lol.

@grandpawgoth5999 4 года назад

Thnx for everything .ive subbed think youve more than earned it thnx again.

@GixxerFoo 4 года назад

Thank you I appreciate that, I'm happy I could help you out there. That's the beauty of Sportsters is they are super interchangeable and pretty simple to work on with Harley Shop manual. Get the official Harley manual from a dealer, it's about 70 bucks but well worth it. It is literally step by step with torque specs and everything.

@grandpawgoth5999 4 года назад

Got mousetraped last night lots of roadrash on us both now im starting over and on top probably wont b workin for a wile.so im in holding pattern for the next two three weeks.(less i hope) 🚑🚒

@GixxerFoo 4 года назад

@@grandpawgoth5999 Oh crap, I hope you are alright! How's your bike looking?

@grandpawgoth5999 4 года назад

Bike isn't driving anywere soon lots of broken n bent stuff.im bandaged elbow to fingers both arms and most left leg left knee getting more xrays n such today right jaw socet so sore cant eat.lol barely able to walk.and no part avalable without otdering. And gotta go hour drive to pic up at dealer and way too expensive. Prob end.up ordering cheep knockoffs online myself as i can afford. Stranded at home sucks. And cant even get to work without bumming rides. BUT BY THE GRACE IM ALIVE. pretty sore and miserable and a little pissed none the less.

@tonystoops7802 4 года назад

When people ask me what kind of Harley l have, I say the last one I will ever have. 😎

@GixxerFoo 4 года назад

Lol that could go both ways 🤷‍♂️

@dennisthemenace5150 2 года назад

You never need the best bike on earth just a difference bike every 20,000 miles for 80 years.......

@jamesbennett9654 Год назад

Everything sounded good until the case of beer came up, How come we left out the push rods and cross threaded the spark plugs?

@Audfile 3 года назад

You must have exquisitely accurate hearing.

@GixxerFoo 3 года назад

Not after riding Harleys 😆😂

@fantomrides 3 года назад

Doing mine this fall🍁🍂😉👍

@GixxerFoo 3 года назад

What all are you gonna go with for a setup?

@fantomrides 3 года назад

@@GixxerFoo going from 883 to 1275 with Barnet extra clutch plate kit and race Pro spring 👌

@GixxerFoo 3 года назад

That's the way to do it, are you doing any head work or adding cams too?

@lessmith1409 Год назад

You need a very large cam to take advantage of those heads.

@geraldscott4302 3 года назад

As the owner of a stock carbureted 1200, I don't understand how anybody would not be happy with that. It easily keeps up with traffic, cruises on the freeway at 80 mph, and will top out at close to 120 mph. That's more than you can legally use on the street, and I don't see many people taking their Sportsters to the track. Sportsters and all pre M8 Harleys are about the riding experience, the feel and sound, not power. If you want power, get a 600cc or 1000cc crotch rocket. Or a Hayabusa. Get the right tool for the job to begin with. Unlike car engines, you can't get aftermarket parts for motorcycle engines to beef up the engine from the ground up to handle more power. A 1200 engine has a lower redline than an 883, because it has bigger heavier pistons. But an 883 is geared for the 883 engine, which turns faster. When you put a 1200 kit on it, you are still stuck with that 883 gearing. Putting a 1250 or 1275 kit on either an 883 or 1200 doesn't seem like a good idea. The more power an engine makes, the more stress it puts on it's parts (I've been an amateur drag racer for 45 years) Just what is all that power going to do to the bottom end and transmission? I have seen a lot of car engines destroyed by increasing the power of an otherwise stock engine with a turbocharger, supercharger, or nitrous. The stock parts couldn't handle it and broke, in some cases scattering the engine all over the track.

@kevinh4910 4 года назад

I never understood the point of getting an 883 just to spend thousands to make it a “1200” meanwhile when you trade it in... it’s still titled and books a cheaper 883

@GixxerFoo 4 года назад

Yeah that's the bad part about converting the 883 is selling or trading. But if you do build a monster motor with one the insurance company still has 883 by the vin.

@ryanhibbard7796 4 года назад

You buy the conversion to put on the lighter frame of the 883. Why pay full price for 1200, when you can buy a cheap 883 and make it a 1200?

@Bahlzeron 3 года назад

@@ryanhibbard7796 1200 and 883 are the same bike, very few changes between them. Obviously the engine displacement, and the 1200 is geared better for highway vs 883 geared better for city streets.

@TomSarracino Год назад

Great video. Thank you.

@geraldwest3428 3 года назад

Probably have to do a belt to chain conversion with all the extra power and torque? Thanks man!

@GixxerFoo 3 года назад

You can still run a belt if you want, Buells were 105 horse and still had the belt. Now if you're drag racing or something a chain conversion is a good idea.

@geraldwest3428 3 года назад

@@GixxerFoo cool, thanks man!

@RedlineDR1200 3 года назад

@@GixxerFoo 105hp to the crank, take about 16% off for rwhp

@MrLdvo 2 года назад

I think you didn't mention the remapping part. the fuel pack 3 and the screaming eagle and the other computers are also expensive. I'm looking a way to do it without buying those computers.

@GixxerFoo 2 года назад

I would highly suggest going with a power vision for about $450, that way they can send you a tune file and all you have to do is flash it.

@paulfiore850 2 года назад

Can I get a good kit for my 96 1200? What would you suggest? Thanks very much for any advice. You talked me into the gear drive cam for my 01 FXDX last year and I love it

@GixxerFoo 2 года назад

That's awesome! On a 96 model you'll need to get some head work, the heads from 91 to 03 just weren't the best performance. For the street a 1275 kit and some head work will go long way, you could even add some of Hammer's 570 cams. 1275, head work and the 570 cam with a good exhaust is a great street setup.

@arrowrod 4 года назад

Yippee! Add displacement. You think the Sportster vibrates? What until that 1275 gets to 5000 rpm. The handlebar grips will grow to 3 inches. There is a reason HD limits the 883 to 40 HP. Vibs.

@GixxerFoo 4 года назад

The newer rubber mount bikes really aren't that bad with vibrations, they do have a weird spot I've noticed like 60mph flat for some reason is awful. Above or below that it's pretty smooth, now the older rigid mount bike are a shake down. You get the full Harley experience with a rigid engine mount Sportster lol.

@filoIII 4 года назад

@@GixxerFoo I had a '93 and '00 Sportster. I guess you get used to it.

@GixxerFoo 4 года назад

@@filoIII Lol you do, I ride mine long enough and you literally get numb to it.

@aswracing1 4 года назад

883's and 1200's share the same crank, literally the same part number, and they've done so every model year since 1995. Which means the motors are not balanced differently between an 883 and 1200 despite the piston weight difference. Instead, they balance the crank for a piston weight in between the two. Well, the forged pistons in a 1275 kit are actually about halfway in between the 883 and 1200 piston weight. So the balance actually comes out better.

@hegantetamboktyanak6368 4 года назад

I have a buell xb12ss lightning 106hp its a 1203 thunderstorm with xbrr oil pump and extra big crank pin standard and big brakes . Maybe some buell parts are the answer ?

@butteredbiskit3497 4 года назад

Or a just a Buell xb12ss? 🤔

@shep236 4 года назад

Buell heads are better and the cams are hotter. I have a xb12s that I'm gonna do either the 1250 or 1275 on

@aswracing1 4 года назад

@@shep236 At one time, the Buell heads were better, sure. But in 2004, all XL1200's models got what's essentially the Buell XB heads. Same ports, same valves, same spring pack, same chambers. The only differences are cosmetic. These are the best production heads ever made for the Evolution XL platform. The XL1200 continues to ship with these heads to the present day, with only some minor changes in 2007 when the switch to EFI happened.

@Partyatmosphere 4 года назад

I have a Buell X1 lightning 2000. An I have an 883 low.. What a waste of money these kits are. Such miniscule gains for so many hard earned dollars.

@joealvarez5171 4 года назад

So hey I like the 1275 kit idea... but what about my stock parts that I will be running it from? ( like mentioned in the video the cams etc) will that 1275 kit be well maintained or in other words will it break my 883 later down the road

@GixxerFoo 4 года назад

The stock bottom end on a Sportster is pretty stout, the only thing you want to upgrade in the process in the oil pump gear drive to a bronze gear drive. Buell had issues with the steel gear getting sharp and coming apart with the increased power. But it really all depends how your ride, Hammer says they are just as if not more reliable than stock.

@blakesmith2594 4 года назад

I have a 1200 I want to take it to a 1340 like the bigger evos and different cams and adjustable pushrods and pushrod tubs do 4 plug 1200 heads

@GixxerFoo 4 года назад

Holy crap that's pretty ambitious, Hammer does make a 88ci and 90ci setup. Well they get the cylinders from Axtell, you'll have to bore the cases though to make it work.

@blakesmith2594 4 года назад

For the 1200 taking it to 1340 is stage 4

@hayderalseigerry5169 2 года назад

Hi just an advise I hope you can help with your exporters I have 2016 CVO 110 deluxe I more power out of it with reasonable price

@georgeplummer2810 2 года назад

I have the hammer 1250 kit 5000mi no problems

@Coyote-wm5op 4 года назад

Going with a 1250 Hooligan kit from s&s. Can’t wait to leave some big spenders in the dust on a 25 year old bike.

@GixxerFoo 4 года назад

Man that's the beauty of the big bore kits... the bikes still look stock and pack a nice surprise 👍

@thesaholland7522 2 года назад

Thanks for info

@GixxerFoo 2 года назад

Any time!

@stephenmiller7388 4 года назад

I've fitted the wiseco forged aluminum 1200cc kit on my 808 883 loved it laterbon i fitted a set of cams put the biggest that i could plus changedthe injectors now m y little 883 is a rocketputs a smile on my dial every ride , idon,tregret a dollar of it these bikes kittedout scare the crap out of the japasawki bikes offf of the stop light drags yes sirgreat fun

@GixxerFoo 4 года назад

Oh yeah they frickin pull hard kitted out! If you look at the power curve it's like having power all time!

@Partyatmosphere 4 года назад

And You still can't keep up with the foreign bikes can you? Especially on the curves

@reubenpowell4395 4 года назад

Did this to my 883 and I can keep up or do better than the big boys!

@GixxerFoo 4 года назад

This would be awesome on an 883, no one expects it and the insurance company still has the 883 vin number!

@Fausto_4841 3 года назад

Had some genius on facebook tell me doing a 1250 and insuring it a 883 was insurance fraud. Lol. My ins knows its there from declared value, cant change the frame vin.

@GixxerFoo 3 года назад

Yeah it's still an 883 as far insurance is concerned since they go by the vin. Now if you have a turbo you might disclose that 🤷‍♂️😆

@exexpat11 3 года назад

I stage one'ed my 1200 Roadster and have been chopping weight off it to increase the effectiveness of the increased power. 3lbs here, 5lbs there, 20lbs OEM Exhaust and Cast Iron Bracket for a 2-1 thin plate steel bracket. I feel a stage two coming on... maybe next season.

@GixxerFoo 3 года назад

Nice set of cams will make a whole new bike, especially with either Andrew's or Hammer.

@GLH1213 2 года назад

hello folks i would love to convert a sportster to the 1250 0r 1275 engine. my concern is will the brakes be able to control that much engine power?

@neilstern1694 3 года назад

I checked it out is said only for race bikes ,not for every day street bike. Street legal is sort of important .

@GixxerFoo 3 года назад

It depends where you live, some states are really strict about emissions. You can use a hammer kit on the street and still have a very reliable bike if you're able to tune it to their specs. But I would not run their kits at the EPA fuel ratio, my Sportster stock ran like crap starving for fuel and it was hot. You can use the Harley Stage IV and be completely emissions legal, but it cost a lot more and you get major drop in performance compared to Hammer.

@g-loctv6114 4 месяца назад

So what about the S&S 1200 kit vs the HD 1200 kit?

@wendell454 48 минут назад

What if you had bigger valves, ported and polished your heads how much more HP would u gain with the 1275 kit

@rodleithner7931 2 года назад

Ok in 2009 I got a wild hair an purchased an 883 Iron. I converted it to a 1200 with a racing tuner vance and hines short shots. At Harley D Michigan City IN. It was a rocket from 0-50 mph even rice rockets were saying what the f#@#%k. My dyno was like 74 hp and tq around 77 . Did not matter I was 49 y/o and the ride sucked!!!!! I paid it off and then it sat in my garrage for five years. A total waste of $12500 bucks!!

@martinkeet8373 2 года назад

Hey Gixxer, great stuff thanks. I just bought a 2005 sporty 883 C but I find the seat is waay uncomfortable, I keep pushing myself back up and on top of the passenger seat... Am I alone in this? I am just under 6' and about 100kg. Tx bro

@GixxerFoo 2 года назад

You're not alone, I have several aftermarket seats for my bikes and after long stretches I do the same thing myself.

@minimonkeyhead 4 года назад

I 👍🏼 @GixxerFoo! -->Oh, and I just pretend that I understand everything about motorcycles...) "Why?", You ask... ☝🏽Because👇🏽 👉🏽"I JUST SAID, 'I👍🏼 @GIXXERFOO !'" *Also, watching and listening to his videos are a blast. I even enjoy watching other motorcycling videos along with my 8 year old daughter. Woohoo! Motorcycle! **Miss ya Gixx-ster. I noticed your comments about rough weather. Hope it improves soon.

@GixxerFoo 4 года назад

Yeah the weather has been rough, it's improved but I've been getting parts together and working on some videos. Lol quite a of maintenance this time of year, bald tires, oil changes, batteries. Lol all the fun stuff.

@minimonkeyhead 4 года назад

@@GixxerFoo Yesterday, November 17th, we had a very pleasant temperature of 82°! Here on the central coast of California, we tend to get our Summertime weather during the Fall months and sometimes even the Winter months. A few years ago we had record breaking temperatures over 110° around this same time! We set up a "mini waterpark" (put multiple inflatable pools and sprinklers up) on our front lawn for my daughter that one year. It was insane! Too hot for me. Today is looking to be much cooler, approx low-mid 70's. If I could send you some of our clear and warm weather, I would. Sorry Gixx-ster.

@minimonkeyhead 4 года назад

I was a bit off on my prediction for the temperature that I expected in my town for today... just a smide... It was pushing 80 again today!! I saw weather forecasts saying it was going to be in the low-mid 70's. 😶 Umm, nope. It was another perfect day to go out and get a little crispy before the cold weather finally makes its its appearance. A lovely peak temperature of 78° here. Our weather is very entertaining. Like the time it actually snowed this past February! We live only 5 miles from the ocean... but it actually snowed here! It was enough to leave a very nice white layer of its rare beauty on everything. The last time I remember it "snowing" (calling that past "snow" event would've been a huge exaggeration had it been like the most recent event February 22, 2019) it was a bit of visible white icy stuff up on the nearby hills. So ya, in this small town, weather is often the biggest source of our entertainment. Lol! *I even got video of the February 2019 snow falling as my daughter and I stood in our front yard. I'll have to post it to my RU-vid channel.

@GixxerFoo 4 года назад

@@minimonkeyhead l wouldn't know what to do with weather like that year round. We've been high 70's one day and back to freezing the next lol.

@minimonkeyhead 4 года назад

@@GixxerFoo We have some family (local to us) that should be arriving in Oklahoma a moment. My great aunt and great uncle and their daughter (my 2nd cousin)

@robbyclark6915 3 года назад

I wonder how my little 883 can handle all that extra power and torque on its stock suspension and frame? Seems like the suspension, maybe even the forks might need some attention after doubling the power?

@GixxerFoo 3 года назад

They do really well being upgraded with big bore kits. Engine handling it isn't a problem at all. The chassis does fine as well, assuming your forks are serviced and brakes are good.

@robbyclark6915 3 года назад

@@GixxerFoo Awesome! Thank you! I have this 2o2o 883, it’s my first bike, and I have been wondering about upgrading to a soft tail in the near future for the extra power on the highway but I just love my sporty and don’t really want to see it go. I can’t afford two bikes but maybe if my 883 will do fine with a big bore kit sometime in the next couple of years I can just keep it and save some bucks on payments and insurance? Kinda the best of both worlds.

@GixxerFoo 3 года назад

Ex as carly cause you're bike no matter the CC will always identify as an 883 by the vin 😄👍. That saves a lot of money on insurance. A big bore Sportster 1250/1275 is a blast to ride.

@jacobmartinez2732 Месяц назад

If i am converting my 2022 883 to the 1275 would you recommend new heads and/or new cams? Or would the conversion kitwith new clutch spring be enough? Also should i be getting it tuned after doing all this? Would this actually even still work on 2022 model? :/

@GixxerFoo Месяц назад

You will for sure need a tune, get the Power Vision from Hammer and it will come preloaded with the tune. The vanilla conversion with reusing the 883 won't be too bad but if you can pop for head work go ahead and do it. You won't regret it cause the 883 are different than 1200 heads and the heads will hold it back a bit. But specify this when you order the kit, Hammer kits using the stock 883 have different pistons than what you get if you do head work.

@dhaliwalfilms1576 Год назад

Can you help me out i upgraded my iron into 1275 hammer kit With screeming eagle breather Dinojet tune Cobra exhaust Fob security system BUT THE ISSUE IS BATTERY IT NEW BATTERY FROM HARLEY BUT BIKE UNABLE TO SELF UP LIKE IRON QUICKLY CAN YOU HELP ME OUT SHOULD I UPGRADED THE BATTERY

@richardweidman2298 2 года назад

What about the millennium 80 cubic inch kit 109 horsepower '99 foot pounds of torque plus Buell thunderstorm heads millennium is in Plymouth Wisconsin

@GixxerFoo 2 года назад

That's really interesting! I haven't head of that manufacturer before, I'll have to check them out!

@sturutherford697 3 года назад

My 2015 883, has sat for a year after I slid it and cracked the primary cover. I got all the parts to fix everything and an oil change kit. Is there anything else I should do to the bike before running it? Or to get it running back right?

@GixxerFoo 3 года назад

Did you leave any fuel in the bike? If you did, I would drain the tank and go back with fresh fuel with some fuel system cleaner. Fuel system cleaner will help with the injectors if they are a bit sticky, Lucas would be a good one to use, I usually put about a half ounce in on my wife's 2.1 gallon tank.

@marcielynn4886 3 месяца назад

Just buy the 1200.

@Firestorm637 4 года назад

Lots more horsepower. Most Harley guys do not go to red line. Midrange more important horsepower range. Good video.

@GixxerFoo 4 года назад

Exactly, I rarely rev out to 5k. I'd go for the 1275 but use Hammer's 570 cams which are impressively an improvement over the factory W cams in the low and mid range.

@davidcarr9563 3 года назад

Hi I've got the 1250 hammer kit on my 883, just wondering what head gasket will fit now.

@GixxerFoo 3 года назад

The same gaskets for whichever head you have will still fit, 883 stock, ported or 1200 heads. There's not a special gasket for a big bore kit, that's the cool part about these kits.

@Duey_diditGarage 3 года назад

I'm finishing up a hammer 1275 kit this week

@GixxerFoo 3 года назад

👍 that's awesome, what all did you go with doing your 1275?

@Duey_diditGarage 3 года назад

@@GixxerFoo just the basic 1275 kit

@GixxerFoo 3 года назад

Converting an 883 or a 1200?

@Duey_diditGarage 3 года назад

@@GixxerFoo 883 to 1275 the 883 head make more compression than the 1200 heads

@GixxerFoo 3 года назад

That's gonna be quite the jump in power. Do you have those trick reverse dome pistons?

@nomercy3422 4 года назад

I left a comment :)

@rugershooter5268 3 года назад

My bro had Harley 1200 kit put in his 89, by Harley dealership, instantly can't keep a stator. Been "fixed" by 3 other independent Harley mechanics.....still can't keep a stator. It sat for many yrs, my nuther bro took it over and had it "rebuilt" .......still can't keep a stator I know this is something never heard of, never happened before, not possible. I'd like for him to get it fixed cause when he(69) dies it goes to me......... I'm thinking compensator For this reason, I'm big on stock.....well not just this reason.

@GixxerFoo 3 года назад

That's really a curiosity since the bottom ends are the same on both the 883 and 1200. There's got to be something electrical causing the stator to fail. I'm just guessing here but maybe a wire was nicked during install and power is going to ground somewhere.

@rogerharris5301 7 месяцев назад

Stator is behind the clutch on a 4 speed. Poor design

@exexpat11 3 года назад

You made a mistake or could not afford a 1200cc right off the bat... GO CRAZY!!!!!! Zippers 1400cc!

@headreddedstepchild6177 2 месяца назад

Would this affect the reliability? I'm wanting to put the hammer kit in my 05 883, but dont want to sacrifice reliability

@GixxerFoo 2 месяца назад

No issues with reliability, Hammer makes a solid kit and just a bolt on 1275 kit with cams isn't even gonna be close pushing the boundries of a stock Sportster bottom end.

@yodab.at1746 Месяц назад

Nitrous. Just get a bottle of fun.

@GixxerFoo Месяц назад

Nitrous is a lot of fun! It's hard on the rings though lol.

@USNVA-yn6cp 2 года назад

heres the big question,, my stock 2003 883 is getting 45 mpgs,,,,how much worse will the mpgs get if the motor is punched out to 1275?

@GixxerFoo 2 года назад

It depends how you ride it, you get more power at any given throttle position by using less throttle. Mileage usually goes down as a result of enjoying the power, but conservatively ridden it should get about the same.

@oneromero6155 3 года назад

It’s hard talking to them they rush you off the phone

@GixxerFoo 3 года назад

They are extremely busy this time of year, their product is in very high demand.

@charlesbolin7249 2 года назад

If you upgrade the 883 to a 1200 or 1250 or 1275, should you think about changing the transmission gears? I checked the specs for the 2022 883 and 1200 and noticed that the 883 has taller gears. So now I'm thinking to get the most of it, widening the gear span to find a sweet spot might be a good idea. Any thoughts on that?

@Cory_Burning_Rubber Год назад

So, here's just my thoughts on it; honestly, if you're changing that much on a bike - the transmission gears, cylinders, pistons, cams, everything - then its just better to get a touring bike with all the bigger stuff already on it.

@chrissmith7669 Год назад

@@Cory_Burning_RubberI’m upgrading with an over bore to 1200 with head job. It’s not for touring. It’s my around town fun machine. For touring and highway miles I’ve got a big softail.

@cafenightster4548 4 года назад

I have a front primary pulley that I have sitting in my garage that's one tooth down for my 1200. I'm trying to figure out how to get the stupid thing off. It didn't budge with a 5 foot breaker bar, I guess I have to borrow someones 50 gallon air compressor and 1/5" impact.

@GixxerFoo 4 года назад

Holy crap the nut won't budge?? I haven't messed with the pulley yet but it might be reverse threaded.

@douglasshaw1946 4 года назад

They are reverse threaded

@cafenightster4548 4 года назад

@@douglasshaw1946 Oh yeah, I know that.

@terrysee2021 4 года назад

Heat it, that'll loosen the lock tite, not too much though

@cafenightster4548 4 года назад

@@terrysee2021 Thanks, for some reason I didn't think of that. I'll try that, just gotta find my torch.

@rugershooter5268 4 года назад

Brother had '89 883 never a problem, '92 put Harley 1200 kit done by Harley shop, yes it had more power......couldn't keep a stator working and back tire went away fast.....it had sit for a long time, my next brother had it fixed as a 1200........stator Now I've had 2 883 both carb, never a problem......we have lots of curves and I never could see doing anything for more power......both got 10k+ on back tire BTW they (I think its S&S) make a 883-1400

@GixxerFoo 4 года назад

That's really strange not being able to keep a stator in it, did you ever find out exactly why?Those 883's have different gearing in the primary which is awesome on the curvy roads. Mine has the taller gearing which is great on the interstate but you notice its downfalls around town.

@rugershooter5268 4 года назад

@@GixxerFoo Last time it was x-harley shop mechanic..........him and everybody "that knows" says it couldn't be the 1200 kit.......but nobody got any better ideas......thats because everything has been changed, except taking it back to 883.....last time was a restoration and included heads, jugs, rings, pistons, stator, lights, wires,.......all electrical......2 days riding(easy riding like a new bike) and it was dead, checked stator.....bad I think its simply the '89 883 case wasn't meant to have a 1200 sitting on it.

@GixxerFoo 4 года назад

@@rugershooter5268 That's crazy! Every now and again you find that one exception, l'd say there was something with it being a 1200 then. Yeah maybe those cases and that 1200 conversion weren't meant to be.