Shower Curb Tile Installation & Glass Shower Curb 

Thanks for watching!

i watched your video regarding building the curb using 2x4. i noticed that you used 1. treated wood on first one 2. standard 2x4 - 2 more 3. waterproof with Aquadenfense 3. cover with Oatey liner 4. cement board around the curb with thinset 4. then tile this is solid protection from leaking . did i miss anything? @@simonproatl

4. Cement board around the curb with thin set and fiberglass mesh (wrap entire curb or a least all seams with strong 2" fiberglass mesh). 5. 2-3 Layers of Waterproofing Membrane. 6. Tile (shower floor first and grout it then shower curb and shower walls) Good Luck! You Can DO IT :) @@vinhgolf

Thanks!

Glad you liked it!

Bosch

Yes. Graut will hold better is you leave small gap.

Hey, Simon, I followed your video and finished my shower curb. But I didn’t cut well on one inside curb tile, the gab between the bottom of this tile and the mosaic floor tile is slightly larger than 1/4”. Should I worry about that? Is silicon good for wider gaps? Any advices?@@simonproatl

1/4" It's a large gap. If you grout it well and silicone it you should be OK. If you waterproof everything underneath you should be fine.

Thanks. You mean grout the 1/4 gap, then silicon on top of it?@@simonproatl

You can use MAPEI Silicone Caulk that matches your grout color @@AndroidTester-g3p

Atlanta GA

You don't want to wait thin set must be fresh. You have to cut your marble curb first then sooth out the thin set and install curb.

Thanks for the clarification. That make sense. @@simonproatl

1/16" to 1/8"