Siemens NX Tutorial | Distribute WAVE left centrally

Подписаться 4,2 тыс.

Просмотров 1,4 тыс.

50% 1

B2A-19-4 | Siemens NX 2007 Tutorial Assemblies | How can several components be adapted to a new shape at the same time?
The video shows how to create a distributor for WAVE links and is intended for anyone who designs fixtures for welding, measuring, gluing, laser cutting etc..
Or design tools for punching, bending, drawing sheet metal, but also plastic injection tools.
▬about this channel▬▬▬▬▬▬▬
With LearnNX you will learn Siemens NX step-by-step from the beginning. The basic course consists of learning videos that build on each other. (marked blue)
You start here: • Siemens NX Tutorial | ...
In between you can check your knowledge with tests. (marked green)
Expert exercises impart special knowledge. (marked red)
All learning videos are available for free. We look forward to your comments on RU-vid. (and about your subscription ;-)
/ @learnnx
▬about our free learning platform▬▬
😃 All tutorials, clearly arranged, can be found here: learnnx.com
Learning videos with a short description, together with the exercise materials as download.
You can also search 🔎 for commands or topics.
And all according to the motto: step by step / for free / for all 🎈
▬Links▬▬▬▬▬▬▬▬▬▬▬▬▬
The assembly
learnnx.com/downloads
▬chapter▬▬▬▬▬▬▬▬▬▬▬▬
00:00:00 Foreword
00:00:31 Background
00:01:02 Task
00:01:47 Create outline
00:04:40 Define trim area
00:07:27 Distribute wave links
00:09:51 Adjust position pins
00:12:20 Swap dummy for item
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
► visit us on learnnx.com
#learnNX #SiemensNXfreeCourse

Опубликовано:

26 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 23

@LofEtmaz 2 месяца назад

Very good, useful, thanks

@Bhojpuri_Gana_Naya 9 месяцев назад

I like your way to explain of objects and command in nx

@learnNX 9 месяцев назад

I hope you save time in the future!

@samirarad9362 10 месяцев назад

very good. thank you.

@learnNX 10 месяцев назад

Thank you, Samira 🙂

@hoffybeefe 4 месяца назад

05:22 Try using "offset surface" set to Zero distance for the work-around feature. it'll give you the same Selection Intent Rule but a less annoying feature to "figure out" down the track with less requirements as no direct vector selection so easier to create as well.

@learnNX 4 месяца назад

Also possible, thanks for your tip. But the main issue is the centralised management of WAVE links. Have you tried it?

@miladmoghbel2906 10 месяцев назад

Thank you very much dear teacher for your teaching nx

@learnNX 10 месяцев назад

Oh, thank you. What is your favourite?

@miladmoghbel2906 10 месяцев назад

@@learnNX My father owns an aluminum foundry and most of the parts we produce are for masonry machines. I am more interested in design and especially manufacturing

@miladmoghbel2906 10 месяцев назад

@@learnNX I have been familiar with nx for 2 years and I love this software very much, and every time I learn something new, my interest grows more and more.

@learnNX 10 месяцев назад

@@miladmoghbel2906 As shown in the example, you can also link solids and subtract them from the mold halves of the casting mold.

@hanikhalil8569 9 месяцев назад

We missed you so much master please I'm asking about section surface in details thanks a lot you are the best

@learnNX 9 месяцев назад

I am in the middle of preparing for the Drawing Creation course. The first video shows in simple steps how to create a fully automatic drawing frame. But it's not easy to explain complex things simply. Moreover, I have checked all the steps several times so that it is really idiot-proof. I am now cutting the video. I think Monday it will be ready. After the drawing creation chapter comes freeform, or sheet metal, or part families? What do you think?

@hanikhalil8569 9 месяцев назад

@@learnNX thanks sir ; actually I don't want to show bad but really we want them all 😊😊😊

@alirezasaedi2613 9 месяцев назад

please from the assembly section clearance analysis Make a movie, thank you

@learnNX 9 месяцев назад

Good idea, now it's on my to-do list

@devendrapatel6316 10 месяцев назад

Sir u make a four axis program in mill users define [udop] making video in full details

@learnNX 10 месяцев назад

Next comes the drawing creation to complete the basic course.

@nx6677 10 месяцев назад

I like your video's, very cool, very instructive. How would you approach OFFEST curve in NX ? Regular offset curve or offset curve in sketch are not parametric, there is number of Copy (this number can not be an expression)

@learnNX 10 месяцев назад

To create a parametric offset curve, the option "Associative" must be activated in the menu. To create a parametric offset curve in the sketch, the "Create Persitent Relation" option must be activated in the menu. The number of copies cannot be controlled by an expression. Why do you need a controllable number?

@nx6677 10 месяцев назад

Please see : "number of copy" .... can not be controlled by expression, I was referring to that, what alternate trick can be used !?

@learnNX 10 месяцев назад

@@nx6677 yes, the number of copies can not be associative. Once again, for what do you need multiple offset curves, maybe there is another solution.