Siemens NX Tutorial | Geometric dimensioning and tolerancing GD&T

Подписаться 4,2 тыс.

Просмотров 2,7 тыс.

50% 1

B3D-12-2 | Siemens NX 2206 Tutorial Drafting | Learn how to create Geometric dimensioning and tolerancing with the Feature Control Frame. And how to create Theoretical Dimensions, define Datum References, add additional information texts,
display measurement directions, define multi-line symbols and divide references into reference points.
The meaning of each symbol is also explained, step by step as always.
▬about this channel▬▬▬▬▬▬▬
With LearnNX you will learn Siemens NX step-by-step from the beginning. The basic course consists of learning videos that build on each other. (marked blue)
You start here: • Siemens NX Tutorial | ...
In between you can check your knowledge with tests. (marked green)
Expert exercises impart special knowledge. (marked red)
All learning videos are available for free. We look forward to your comments on RU-vid. (and about your subscription ;-)
/ @learnnx
▬about our free learning platform▬▬
😃 All tutorials, clearly arranged, can be found here: learnnx.com
Learning videos with a short description, together with the exercise materials as download.
You can also search 🔎 for commands or topics.
And all according to the motto: step by step / for free / for all 🎈
▬Links▬▬▬▬▬▬▬▬▬▬▬▬▬
learnnx.com/downloads
▬chapter▬▬▬▬▬▬▬▬▬▬▬▬
00:00:00 Foreword
00:01:18 Theoretical dimensions
00:01:44 Datum Feature Symbols
00:03:09 Position tolerance
00:04:54 Common Zone
00:07:39 Multi-line symbol, different characteris
00:09:21 Define measuring direction
00:10:11 Copy and add entries
00:11:23 Tolerate area
00:13:18 Divide references into reference points
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
► visit us on learnnx.com
#learnNX #SiemensNXfreeCourse

Опубликовано:

26 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 9

@LofEtmaz 5 месяцев назад

Very useful, thanks

@samirarad9362 6 месяцев назад

very nice thank you very much

@Stocjon1985 6 месяцев назад

Just as a matter of knowledge, I know that the main intention of the videos is teaching NX but as the topic GD&T is mentioned I need to inform. ISO GPS (GD&T) no longer uses composite tolerance(Frame) , only ASME Y14.5. So in this case double tolerance frame should be used in this demonstration once you wanted to talk about CZ modifier.

@learnNX 5 месяцев назад

Hello Stocjon, thanks for your tip! Yes, that was a difficult video. I actually just wanted to briefly show how the symbols are created, but I also had to bring myself up to speed. So I studied the latest textbooks, searched the web, etc. Nevertheless, I also noticed a mistake myself: Since the part is placed on C first during the measurement, the reference must be C|A|B. But as you have already written, the video is intended to show how the symbols are created and placed in NX.

@Stocjon1985 5 месяцев назад

@@learnNX Sure not a problem as you said it is a only a tip. Related to C|A|B I did not get it when I watched. Respect for showing it. Your videos are regreat as always. Keep doing!