Sika AnchorFix S
■ Universal Anchoring Adhesive
■ Styrenated polyester based 2-component anchoring adhesive
Features
■ Fast curing
■ Non-sag, even overhead
■ European Technical Assessment (ETA) for anchoring in uncracked concrete
Usage
As a fast curing anchoring adhesive for all grades of:
■ Rebars / reinforcing steel
■ Threaded rods
■ Bolts and special fastening systems
In the following substrates:
■ Concrete
■ Hollow and solid masonry
■ Hard natural stone*
■ Solid rock*
* These substrates may vary greatly, in particular with regard to strength, composition and porosity. Therefore, for each application the suitability of Sika Sika AnchorFix® S adhesive must be tested by first applying the Product only to a sample area. Check in particular bond strength, surface staining and discolouration.
Packaging
■ 300 ml standard cartridge
■ 12 cartridges per box
Colour
■ Component A: White
■ Component B: Black
■ Component A+B mixed: Light Grey
Shelf Life
■ 12 months from date of production
■ All Sika AnchorFix® S cartridges have the expiry date printed on the label.
Storage Conditions
■ Stored properly in original, unopened, sealed and undamaged packaging in dry conditions at temperatures between +5 °C and +25 °C.
■ Protect from direct sunlight.
Curing Time
■ +25 °C - +30 °C
■ Opening Time: 3 minutes
■ Curing Time: 30 minutes
Open time dictates the time available for mixing, applying, smoothing, shaping, assembly and clamping.
Cure time or curing time refers to the length of time needed for something to fully cure. Many substances need cure time to fully cure. Examples are: epoxies, glues, resins, concrete, etc. In a rubber compound, cure time is the length of time to reach optimum viscosity or modulus at a certain temperature.
Application
■ Mixing Ratio
■ Component A (White) : Component B (Black) = 10 : 1 by volume
■ Layer Thickness: 3mm max.
Product Temperature
■ Sika AnchorFix® S must be at a temperature of between +5 °C and +40 °C for application.
Substrate Temperature
■ +5 °C min. / +40 °C max.
Application Instructions
Mixing - Getting the cartridge ready 300ml
1. Unscrew the cap
2. Cut the film
3. Screw on the static mixer
4. Place the cartridge into the gun and start application
When the work is interrupted the static mixer can remain on the cartridge after the gun pressure has been relieved. If the resin has hardened in the nozzle when work is resumed, a new nozzle must be attached.
Application Method
Anchors in solid masonry/concrete
1. Drilling of hole with an electric drill to the diameter and depth required. Drill hole diameter must be in accordance with anchor size.
2. The drill hole must be cleaned with a blow pump or by compressed air, starting from the bottom of the hole. (at least 2×) Important: use oil-free compressors.
3. The drill hole must be thoroughly cleaned with the special steel brush (brush at least 2×). The diameter of the brush must be larger than the diameter of the drill hole.
4. Pump approx. twice until both parts come out uniformly. Do not use this material. Release the gun pressure and clean the cartridge opening with a cloth.
5. Inject the adhesive into the hole, starting from the bottom, while slowly drawing back the static mixer.In any case avoid entrapping air. For deep holes extension tubing can be used.
6. Insert the anchor with a rotary motion into the filled drill hole. Some adhesive must come out of the hole. Important: the anchor must be placed within the open time.
7. During the resin hardening time the anchor must not be moved or loaded. Wash tools immediately with Sika® Colma Cleaner. Wash hands and skin thoroughly with warm soap water.
Sika AnchorFix S
The option that you might be aware of
■ Drilling & screwing anchors
■ Hammer & spikes
■ Bonding/ Glueing
But, there are potential issues
■ Cracking of substrate
■ No hold on porous substrate
■ Too heavy load
■ Drilling must be 100% accurate
Don’t worry! There is a solution for avoiding these problems: Chemical Anchoring
Advantages
■ For any type, anchor diameter & hole depth
■ No swelling or cracking
■ Fixing to porous substrates
■ Excellent performance capacity
■ Sealing open hole, preventing corrosion
For more information, please visit www.ewarehouse.my - Malaysia's Largest Home Improvement Online Store.
#atkc #warehouse #ewarehouse #angkokgei #ahgei #sika #anchorfix
8 сен 2024
