what are you doing? you don't have to take apart the driving system cover. Only you have to do is loosening the oil drain screw! now I see you are doing this to get more money. right?
this is the final drive oil. not the engine oil. so no oil filter. the final drive is more like transmition oil change, except you use 10w40 oil. The engine oil bolts are on the bottom and other side of bike.
There’s a drain screw underneath. The upper final drive screw is for filling. There is also no need to take off the cover. Find yourself a new mechanic or better yet, do it yourself. It literally takes 10 minutes to change the final drive fluid.
official maintenance manual says 10w30. but most folks in the forums say 10w40. Just fill it up until it starts dripping out. dont forget to turn the wheel, that pulls the oil inside it. tourque bolt to 9 lbs. and yes you can do this with the tuperware on, but it gets a bit messy and you might want to look at your belt anyway.
official maintenance manual says 10w30. but most folks in the forums say 10w40. Just fill it up until it starts dripping out. dont forget to turn the wheel, that pulls the oil inside it. manual says it has 3.2 qt capacity, 3.1 liters, but really just fill it till it starts dripping out. tourque bolt to 9 lbs. and yes you can do this with the tuperware on, but it gets a bit messy and you might want to look at your belt anyway.
