Simple Duramax Mod | Fleece All Lights On Module Install: 2007.5 - Up Duramax

Подписаться 120 тыс.

Просмотров 33 тыс.

50% 1

Stay safer, see further, and brighten your nighttime driving experience with our All Lights On. The All Lights On allows your high beams, low beams, and fog lamps to all be on simultaneously to illuminate the roadway when your high beams are activated. When your high beams are not on, your low beams and fog lamps will operate normally.
Watch us install a Fleece all lights on module on 2007.5-Up Duramax trucks.
Want a Fleece All Lights On Modules? Order One Today!
www.thoroughbreddiesel.com/fp...
► Check Out Our Other Install Videos Here:
• Installation Videos
► Check Out Our Other Chevy/GMC Duramax Videos Here: • Chevy/GMC Duramax Videos
★ Saving Diesel Lives! Check out our online store for performance products at: www.thoroughbreddiesel.com/
☎ Give us a call for FREE ADVICE: (866) 737-4966
Please remember to SUBSCRIBE, LIKE, and COMMENT if you like our videos! It really does help us out! Thx for the support.
ru-vid.com...
❤ Join our Diesel Community ❤
● FACEBOOK: / thoroughbreddiesel
● TWITTER: / tbreddiesel
● INSTAGRAM: / tbreddiesel
● PINTEREST: / tbreddiesel
● BLOG: www.dieseladdict.com/
● SNAPCHAT: tbred_diesel
Chapters
0:00 Fleece All Lights On Module
3:32 Installation
5:45 Splicing The Wires (Fog Light and High Beam)
10:23 The Moment Of Truth
#thoroughbreddiesel #fleeceperformance #alllightson #dieselpower #diesellife #dieselporn #truckporn #duramax

Авто/Мото

Опубликовано:

14 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 66

@hardass912 4 года назад

About time, an easier way. I did this on my 09 Sierra 2500HD, was a pain in the azz to wire up. Going to be ordering this for my 16 Silverado 3500HD!! Keep up the great install videos. Thanks!

@thoroughbreddiesel 4 года назад

Thanks! Is a pretty easy and cool mod to do to these trucks.

@jackdaniels7913 2 года назад

Grate video worked on my 2009 GMC Sierra Denali as advertised and as shown here! Easy install and well worth the time and money! 🥃cheers🍻

@kastlrock557 2 года назад

I just installed this on my 2022 GMC 3500 Denali Dually Diesel and it works perfect! Make sure you use a small flathead screwdriver to push the wires into the module securely, then put the clip on. The instructions say you can’t remove the final clip/cover, but you can pop it off with just your fingernail! When my fog lights are on, I can turn my high beams on and they fog lights stay on along with my low beams, so it’s really all lights on!!!! When I’m using just my low beams and then quick flash my high beams, they all come on (low beams, high beams and fog lights). It’s so much brighter, especially for me driving down dark gravel dirty roads.

@davidrayman3576 2 года назад

GO WILDCATS!!! getting ready to install this on my 2021 RST just wanted to make sure the lights function as normal when on low beams thanks for the video

@2809Nick Год назад

Wow that’s a fast and easy install just did it in 5 minutes

@fabiangomezjr4114 2 года назад

Very big help loved the video!!!!👍

@thoroughbreddiesel 2 года назад

Glad to hear it!

@williamcordle-FLman 4 года назад

Got to be careful and follow Wades instructions because this module is good up to 2020 Silverados on my 2014 there is multiple green wires with white stripes

@fleeceperformanceengineeri9556 4 года назад

Always reference the pin locations, the wire colors can vary by vehicle year.

@rpsmith 4 года назад

FYI: Check your state laws before making this mod. Some states have a limit on how many lights can be on at any one time. Some that I know of are less than six.

@williamcordle-FLman 4 года назад

Yeah I’ve been pulled over for this before but if you turn your high beam off for on coming traffic you should be fine

@ronniebenoit4081 2 года назад

Texas is 4 lights on....but I live in the hill country and deere are a big problem. Not killing them fast enough. But,yeah. Be careful who you blind coming at you

@remobigelow7821 Год назад

Just a FYI. I installed this in a 2011 lml Chevy. Wiring is correct but I had to take my wires out after first install and clamp them again. The grooves that cut the jacketing when you clamp it down didn’t cut thru the sheath of the wire the first time, that or it wasn’t making good enough contact !

@thoroughbreddiesel Год назад

Thanks for the info.

@CABswagg803 3 года назад

Just installed this same product on my 2015 2500HD High Country and the connector u unplug from under the dash was brown on mine instead of black

@abrahamestrada1176 2 года назад

Dose it also work for the 2014 Chevrolet Silverado 1500 ,just got mine and this is what I want to do to it

@99str3ngthx2 3 года назад

Wayne, I put this module on my 2016 GMC Duramax and now I'm having an issue where my lights flicker over bumps which is extremely annoying. Can I just remove the module and electrical tape the exposed wire to revert back to stock?

@thoroughbreddiesel 3 года назад

Yes, recheck your connections on the module board and maybe you could fix before you have to remove. But if you have to remove it, make sure that you check the wires where the module was located to make sure you have continuity.

@SlyeDawg 5 месяцев назад

Do you have a video or color connector / color wires for 2017 silverado?

@thoroughbreddiesel 5 месяцев назад

Give us a call 1-859-737-4966.

@brianbean267 2 года назад

My high and low beams stay on with this install but the fog shuts off. Any idea what could be wrong. I installed it just the way you showed the green and white wire and the brown wire. It’s on a 2008 GMC sierra. I even double checked to make sure everything was tight.

@pjkazpa8004 7 месяцев назад

Did you ever get this to work on your truck?

@miguelcuriel5691 2 года назад

Where did you get the diagram from

@zachhuckabee7108 3 года назад

Does this have a diode in it

@ronniebenoit4081 2 года назад

Just installed my all lights on...easy simple and if you have big hands....get your wife to do it...lol. there's 2 green/white wires....I just picked one and connected it to the tan/white wire....bingo it's all lights on. 2013 duramax lml

@731Zach 2 года назад

Can you run Fog lights when highs on are off?

@pjkazpa8004 7 месяцев назад

Yes

@Wodahs32 4 года назад

Hello All, Please believe me when I say THOUGHROWBRED DIESEL ROCKS. The tech support and warranty department are very far honest people to deal with they have my business. Truth and honor is there mantra they live it.

@TB-id6wo 11 месяцев назад

I have a 14' GMC Sierra 2500 HD ... the blk plug is not the same. It is more rectangular. Wire coloring is slightly different also?

@thoroughbreddiesel 11 месяцев назад

Verify your truck year, could be a 15. If so, you will be working with the brown plug.

@TB-id6wo 11 месяцев назад

@@thoroughbreddiesel it states 14 on the registration but it could be a 14.5 ??? I will go look at the identification tags on the truck. Be right back 😬

@TB-id6wo 11 месяцев назад

@@thoroughbreddiesel i found it !! was able to install and verify jumper is good to go !!! Thank you🤘

@giuliogiulio1 4 года назад

Is it the same process for a 2nd gen dodge? I always though my fog lights turned off with my high beams but i could be wrong.

@rylovlogs6756 3 года назад

Is their an application for a 2008 trailblazer SS?

@thoroughbreddiesel 3 года назад

We are not showing that it will work for the trailblazer.

@adalbertoarroyo523 2 года назад

What color conecter is it for a2008 Chevy same as the vid please lmk buddy

@thoroughbreddiesel 2 года назад

What kind of 2008 Chevy? If it’s a pickup, the connector will be the same as in this video.

@adalbertoarroyo523 2 года назад

Thank you sir

@adalbertoarroyo523 2 года назад

A 2008 Chevy duramax what color module brown or black please lmk

@thoroughbreddiesel 2 года назад

BLACK, it will be the exact same as this video.

@charlestiffany1526 3 года назад

Are fogs always on with high beams or can you run high beams without fogs. I saw low with fog and low/high with fog. Not just low and high

@joshuachilders129 2 года назад

Huh? In the video, it shows that factory, with hi beams on, the lo & hi beams are on at the same time. With the module, hi-lo & fog are on at the same time.

@Mcnutts3 2 года назад

@@joshuachilders129 so it's just adding the fogs to the highs. Can you still run the highs without the fogs?

@2thirtytwo 2 года назад

I’m curious too because I had wired in light bar cubes into my fog switch on my aftermarket bumper. And I might just want highs and no fogs on some highways so I don’t get a ticket using off-road lights. Doesn’t look like you can considering the video never showed you can and no one is replying lol.