Simple Guide to Table Saw Safety | Ask This Old House

Подписаться 2,1 млн

Просмотров 90 тыс.

50% 1

In this video, This Old House general contractor Tom Silva shows host Kevin O’Connor the features and techniques required to stay safe when using a table saw.
SUBSCRIBE to This Old House: bit.ly/SubscribeThisOldHouse.
We meet host Kevin O’Connor and general contractor Tom Silva back at the shop to discuss table saw safety. Tom explains to Kevin that there are lots of injuries caused by table saws each year and then highlights some of the features and techniques that can help saw users stay safe.
Table saws cause lots of injuries each year. Very often, these injuries are caused by users removing or not using certain safety devices that are designed to keep them safe. Sometimes, it’s poor technique or positioning that’s to blame. General contractor Tom Silva explains what table saw users need to know to stay safe.
Where to find it?
Tom demonstrates necessary safety protocol when using a table saw. For the demonstration, he used a SawStop 15amp CTS Table Saw, which is manufactured by SawStop [www.sawstop.com/].
Tom emphasizes wearing safety glasses [amzn.to/3P8OFOn] to prevent sawdust from getting in eyes and hearing protection [amzn.to/3X1qSSk] to prevent hearing loss damage from the volume of the saw.
Tom shares how a blade guard can act as a reminder to keep hands and fingers away from the blade and also protect a user in the case of kickback.
Tom then showcases how a brake cartridge can sense moisture near the blade, like the moisture on fingers, and drop the blade beneath the table into a brake.
Tom demonstrates how using a push stick [amzn.to/43FbVIb] helps to keep hands and fingers as far away from the blade as possible.
Looking for more step by step guidance on how to complete projects around the house? Join This Old House Insider to stream over 1,000 episodes commercial-free: bit.ly/2GPiYbH
Plus, download our FREE app for full-episode streaming to your connected TV, phone or tablet: www.thisoldhouse.com/pages/st...
About Ask This Old House TV:
From the makers of This Old House, America’s first and most trusted home improvement show, Ask This Old House answers the steady stream of home improvement questions asked by viewers across the United States. Covering topics from landscaping to electrical to HVAC and plumbing to painting and more. Ask This Old House features the experts from This Old House, including general contractor Tom Silva, plumbing and heating expert Richard Trethewey, landscape contractor Jenn Nawada, master carpenter Norm Abram, and host Kevin O’Connor. ASK This Old House helps you protect and preserve your greatest investment-your home.
Follow This Old House:
Facebook: bit.ly/ThisOldHouseFB
Twitter: bit.ly/ThisOldHouseTwitter
Pinterest: bit.ly/ThisOldHousePinterest
Instagram: bit.ly/ThisOldHouseIG
Simple Guide to Table Saw Safety | Ask This Old House
/ thisoldhouse

Хобби

Опубликовано:

17 июн 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 145

@FerroequinologistofColorado Год назад

That Saw-Stop technology is pretty wild

@JoePJack1 Год назад

Yup, and every table saw manufacturer turned them down to license the technology. So they made their own saws.

@mikeking7470 Год назад

Pity it cannot be retrofitted to old saws.

@JasonFarrell Год назад

@@JoePJack1 Is that so? Shameful that the patent holder's greed prevented the safety feature from becoming way more widespread. Murrica.

@minkie1978 10 месяцев назад

⁠surge balck

@JoePJack1 10 месяцев назад

@@JasonFarrell it wasn’t the patent holders greed. The manufacturers saw liability issues if they sold one saw with the technology and other models without.

@rickdunn3883 Год назад

Ive own a SawStop for 5 years. Besides the safety features, these saws are well built and accurate.

@moonlighttarot3239 Год назад

That is amazing technology! The first time I used a table saw it kicked back on me and gashed my thumb but could’ve been so much worse! It has scared me away from it since. I didn’t have anyone to properly teach me until I watched your video. Even though I watch the TV show more, I just want to say that I’m so thankful you guys make these videos. I’m a 48 year old woman. My dad knew how to do literally EVERYTHING! He died the day after my 42nd birthday and he was the one I went to for anything. After he died I took jobs that taught me how to hang drywall, paint, demo, install trim, install toilets and sinks, electrical, install security systems, and so much more. I am now teaching myself how to work on cars which is what my dad used to do for a living. Hoping to learn HVAC in the future. Sometimes when I have a question and I can’t find no one to answer it I know I can check your videos and usually figure things out. I miss him so much and I know he would be proud of all I can do now and I’m able to help mom when an issue arises in the home without spending the money to call a professional. Dad and I used to watch your show together all the time. I think of him every time I see you guys on here or on TV. Thanks so much for making these videos! I’ve been so lost without Dad, but you guys have been a big help for me more than you know.

@MrLightdark22 Год назад

Wow amazing story! Even though your father is no longer with us I know he is proud of you and the many things you have learned!

@moonlighttarot3239 Год назад

@@MrLightdark22 thank you so much!

@GregCameron2008 Год назад

Really important video! I have a table saw and use it and always always practice 100% safety. It scares the hell out of what it could do to me if I ever don’t show it the respect and care it deserves.

@jamesfrancismchalejr7944 Год назад

I personally don't use power saws & a axe . Mainly because I don't know how to use them safely. Reading directions is good but to learn from someone who knows the proper way is best in my humble opinion

@lockabar Год назад

Keep going like this and you'll start getting shop teachers with all their fingers. Mine had nine fingers. He was missing his right middle finger.

@just_a_guy_doing Год назад

20 years proud of being a shop teacher with all 10 fingers. My secret, not becoming complacent around the saw, focusing 100% on the blade and cut, and lastly listening and feeling what the saw and board are doing. Also have got. In the habit of 2 things, always standing on the side of the cut, that way if kickback happened, I'm clear, just like Tom did, and second, cutting half the length and flipping end for end. Sawstop is an awesome technology and I wish it was manditory for all schools to have only a sawstop.. Imagine just the saving in liability / health insurance payouts, not to mention time out the classroom... The initial $3000 to $5000 a sawstop initial cost would be, compared to cost of later...

@Guardducks Год назад

@@just_a_guy_doing my high school teacher told us don't be like the one kid that had his gut ripped open by the radial arm saw. .

@RealMTBAddict Год назад

Shop teachers? That's a joke right? Nowadays they have been replaced by social media teachers...

@sonia-nf3eh 9 месяцев назад

@@RealMTBAddict.... no hate bro but this is some true boomer stuff. im 20, went to a trade high school, OF COURSE we have shop teachers. nobody teaches social media.... why do you think people are watching these videos?

@RealMTBAddict 9 месяцев назад

@@sonia-nf3eh You went to a trade high school. Calm down.

@SuperBill68 10 месяцев назад

You do have to spend some time setting the saw up... blade, fence, etc. But once done, the saw is great. Fairly compact which is Nice ru-vid.comUgkxXh-4_3-ZT1fFWP91ZV7iVqzElr0lEb-a I did get an Incra Miter Gauge which takes some setup as well. The stock miter gauge can be adjusted in the miter slot with a little painter's tape... this tightens up the side to side play a lot.

@blindlemonpledge2556 5 месяцев назад

Don't know anybody is still reading this but I will still add to the conversation on the subject. Back when I was learning how to use a table saw , many years ago, I was talked to add some thickness to the rip fence up to the point where the saw blade starts its cut. This change to the rip fence prevents the workpiece from pinching between the saw blade and the fence. Now the addition of a featherboard before entering the saw blade keeps the workplace firmly against the fence.

@1252PFC Год назад

Great educational video. Thank you

@Christie-gp2cy Год назад

Very good advice. Thanks for a very informative video.

@BradThePitts Год назад

Another tip is a *quality table saw* where the fence actually stays parallel to the blade. I had a cheaper one that sometimes would "wedge" the wood, resulting in stopping the blade or worse - kickback.

@kippywylie Год назад

I volunteer at Habitat for Humanity where my supervisor is constantly telling me to use a pusher stick provided to send the. piece through that last 6-8 inches. Your thoughts? Often on larger wood it seems like more trouble than it's worth.

@JH-ms3ny Год назад

Agreed. A heavy table saw with a cast iron top is far more safe than those cheap rickety "contractor" saws you see on jobsites.

@dansanger5340 4 месяца назад

The good thing about cheaper table saws is that when kickback happens it's much less violent.

@MH-qq3kj Год назад

Great demo!

@peterohmart5954 Год назад

THAT IS AN EXCELLENT VIDEO!!!

@allentoyokawa9068 Год назад

saw this on TV yesterday!

@javiergalvan2604 Год назад

Outstanding information gentlemen! 👏 ☝️👍🫵

@sociopathmercenary Год назад

I had one moment of distraction when using a table saw when I was 16. The wood kicked back and my left hand went right through the blade. It really didn't hurt. Felt like I slammed my hand down on the table. Started to walk into the house from the garage but had the presence of mind to turn around and check the saw for any loose fingers. Somebody was watching out for me because the saw was set about two inches high but it only removed my thumb and sawed three-quarters of the way into all my fingers. I had a great surgeon that was able to put everything back together again except I did lose my thumb joint. That was 35 years ago and my hand works good enough that I can type about sixty words per minute and I'm currently employed in tech.

@batvette Год назад

Ouch. At the same age in shop class I cut halfway through my left hand pinky. Just some stitches. Havent had an incident in 45 years since.

@malikdigger4544 Год назад

Top 3 favorite home improvement show since 030 haven't miss a episode yeti awesome tip Roger table saw safety know how.👍

@ronevans852 Год назад

Very nice video Tommy,

@rickwallace2091 Год назад

Amazing safety technology

@PaulSmith-zs5je Год назад

I understand there is a cost to research and development but I wish something that is so important for safety was made available for all saw providers. It’s like if a car brand invented the seats belt and only car of that brand are allowed to install them.

@ja8898 Год назад

That almost did happen! Volvo gave away the patent on the 3 point safety belt so everyone could use it.

@kkoff200 Год назад

Before sawstop made table saws they tried to just license the technology to The big saw manufacturers and they all declined because they didn't wanna add any cost to their saws. That's when sawstop decided to build and sell their own.

@PaulSmith-zs5je Год назад

@@ja8898 Thanks for info

@danielstrachan8988 Год назад

WOW these new saws are amazing 👍👍😁

@XzTS-Roostro Год назад

I remembered when they did a taping in NYC and also appeared on The Tonight Show demonstrating the Saw Brake tech.

@davebutler4959 Год назад

I gotta hand it to you! Nice that saw accidents are more rare….I hope that in the near future all saw makers will ketchup on this tech.

@user-wj6xb3np1c 6 месяцев назад

I see what you did there.

@sflagg0817 8 месяцев назад

Thanks for sharing I just placed my order for the Saw Stop CTS I’m pretty new in woodworking and wanted to be safe

@jimpackard8059 2 месяца назад

In that case, you must get training. Vital

@Sidnion626 11 месяцев назад

When I was in hight school in my wood shop class we had a saw stop and our teacher was showing us how it worked and how it keep us safe.

@scottmoore7440 Год назад

Wow. Just bought a harbor freight table saw. Definitely does not have that technology. But as a diyer who barely uses one. That is a great feature. Thanks for the video.

@batvette Год назад

That technology isnt cheap.

@FlameStrykeShadowDark Год назад

Those handburgers are a rare medium well done.

@ShadowzGSD Год назад

nice table saw.

@JonnyDIY Год назад

6:02 lol Kevin!!! 🤣 PS- what about the use of featherboards???

@dansanger5340 4 месяца назад

Keeping the blade low means less exposed blade to injure your hand, but more chance of kickback (assuming no riving knife). Best to just go with a riving knife and blade guard and not worry so much about blade height.

@creationzz1234 4 месяца назад

Great demonstration. Hats off for that fake fingers 👏 👌

@Holdfast 4 месяца назад

I am so careful with my table saw but today scared me. My cut was finished but my fingertip contacted the blade which was shut off but not fully stopped. I got cut but lucky. That is why I am watching this video.

@zonegamma8197 Год назад

indredible tech , stay safe

@timjballin 11 месяцев назад

Also note that, when using a SawStop saw, you should only use unpainted, SawStop blades. The stop system works based on sensing a small electrical current flow, and painted blades like this one inhibit that process.

@mauricecooper9016 10 месяцев назад

Was looking for this comment. Though they dont have to be SawStop brand blades. The blade that ships with saw is junk. I use CMT blades in my PCS. But yeah definitely unpainted blades. And also make sure to get a sawstop recommended dado set too haha.

@batvette 8 месяцев назад

Huh.... Where have you seen blades with painted teeth?

@mauricecooper9016 8 месяцев назад

@@batvette the teeth arent what bond the blade to the saw.

@batvette 8 месяцев назад

@@mauricecooper9016 the arbor hole is unpainted dude. It sits on the motor shaft. The teeth then contact the skin. Or hot dog. Hey I dont own one maybe Im wrong but I dont think so.

@mauricecooper9016 8 месяцев назад

@@batvette the arbor hole on diablo blades at least are painted. All i know for sure is that SawStop recommends not to use painted blades in their saws because it could cause the brake to either have a delayed activation or no activation at all so i dont run them in mine. Not to mention the paint from the blade sometimes tends to transfer to the work piece when making a cut. Not an issue when rough cutting but not something i would want on a finish cut.

@aviscape007 9 месяцев назад

Just loved those Hand-Burgers 😁✌

@johnsee7269 Год назад

I love the hot dog demo; almost magic...

@rupe53 Год назад

Many others have videos using just the hot dog.... but this is classic!

@lesd2633 7 месяцев назад

Warning! That safety feature that stops the blade is a rare feature and not on most saws.

@Guardducks Год назад

Lol, Kevin made two funnies. 😀

@RazorStrap 8 месяцев назад

Way more than two. The others must have gone over your head.

@lizzlefizzleforizzle 10 месяцев назад

Just watched a guy almost lose his finger that’s why I’m here👍🏻 it’s an old table saw at work probably 25+years old and he was supposed to be teaching me. It kicked back and he was standing right behind it. Freaked me out still in shock.

@mikedelgado8460 Год назад

Keep in mind people, although the SawStop has wonderful safety tech, it won't protect you from kick back. Always practice proper safety techniques with ANY table saw!

@paulm5935 Год назад

I don't understand why you proclaimed the blade to be ruined, never to be used again, after the finger injury safety feature was successfully engaged? Paul M, Atlanta, GA

@JonnyDIY Год назад

I believe it hits a pawl or something when goes off and damages the blade/teeth

@edwardgonfindini7295 4 месяца назад

I read that Volvo voluntarily shared their innovative restraint systems to the auto industry without compensation........Sawstop has been around for some time now.

@Pandabubba9 Год назад

This old house 4th of July handburger & handburger bun patriot safety celebration safety pack Fantastic content as always Laughing then pure safety Best safety video and TOH series is fantastic Pride comes from what you can create/repair as an asset and what one factually knows

@joewoodchuck3824 5 месяцев назад

The best and easiest power tool safety feature that nobody talks about is a foot switch.

@vapeurdepisse 10 месяцев назад

That's great, kickback is still a thing

@patrickcrowther9195 11 месяцев назад

Handburger, legendary!

@duncanrocke2173 4 месяца назад

Hey new woodworker here, it’s my first year and the table saw at my work has none of those safety devices. I have had one kickback and have been nervous since. Should I convince my boss to upgrade the old saw? We are a cabinet shop and make probably 300-400 cuts on it a day

@peterbergeris6510 7 месяцев назад

Listened to many videos n the micro jig is recommended over the stick.

@aluminum77 Год назад

Nice to meat you.... Well Done... lol

@rayala21 Год назад

Just watched “Everything Everywhere All at Once”… 😂 hot dog fingers!!!

@patmash 11 месяцев назад

Mikita came out with a better “stop” version of the saw stop that doesn’t ruin the blade. Unfortunately the courts put a stop to its release over patent issues.

@markseay2064 4 месяца назад

Actually it was Bosch. The saw was called Reaxx.

@PtrOBrn Год назад

Can't wait for sawstops patent to pass. Bosch has a better system.

@RazorStrap 8 месяцев назад

What is better about it?

@gjk1504 2 месяца назад

@@RazorStrap It doesnt ruin the saw blade when it retracts.

@RazorStrap 2 месяца назад

@@gjk1504 But is it as injury mitigation effective?

@gjk1504 2 месяца назад

@@RazorStrap supposedly yes . TOH had it on one of their episodes before they took it down due to the patent lawsuit. Will be interesting if it comes back out.

@louisel.sinniger2057 Год назад

Mmm. Years ago when I was an apprentice at the beginning of class a classmate came in with his right arm bandaged and in a sling. Teacher asked him what happened? Kid said accident with a table saw. Teacher asked if the student knew the cause. The student was clueless. It was funny but not funny. Teacher raised his eye brows and said he maybe on the path to lose more.

@leonardkellum6984 3 месяца назад

I picked up an old table saw that does not have a riser blade, can I rig up one?

@xoxo2008oxox Год назад

It works on resistance, where wet wood and moisture will trigger it. So make sure your wood you cut is dried enough, otherwise, its like $80 a replacement cartridge AND your blade...which I think you should inspect. I've seen so many of these youtube makers with $3500 sawstop cabinet saws...and most never disclaim they paid for it or it was free for advertisement purposes. I'm sure its a great tech, but they should license it to others, to save fingers and other injuries.

@JC-qi5bn Год назад

Sawstop originally tried to license the technology to every single saw maker out there. All of them didn't want the technology. It is funny how people think Sawstop is the bad guy for "keeping this to themself" but they tried. Of course they won't license it now that they had to go thru and build an entire business selling tablesaws.

@user-es7vl1ik6r Год назад

It's a decent video on kickback, but it should really cover a lot more. Don't use a miter gauge and the fence at the same time, don't cut twisted, cupped, or warped boards, don't put your hands behind the blade, don't pull lumber through the saw, always use either a miter gauge, fence, or sled (no free-handing), etc.

@dansanger5340 4 месяца назад

Pulling wood through is not a hard and fast rule. If you're pulling from the end of an 8 foot long 2x4 you're never in a million years going to get pulled into the blade if it kicks back.

@Newberntrains 10 месяцев назад

Told my dad about it on his new saw come back 3 days later to use his saw it dont work he used a hotdog to try it out thinking it was simple as resetting a breaker not thinking it would trash the whole system it was so violent it cracked the mount for the motor but im sure 585 for a new saw vs 20k for hospital bills

@robertfontaine3650 9 месяцев назад

The blade flush with the material is definitely safer but cut quality suffers.

@zwels 7 месяцев назад

My biggest thing is that going to the ER just takes way too much time if you lose a finger.

@RippedSocket 4 месяца назад

I keep clicking on 1:35 - "shabamm"

@Charlesb88 Год назад

I take a handburger with cheese, please! Hope it’s finger licking good? 😂

@johnroberts2444 Год назад

That was funny with the burger & weiners together to form a human hand , that was a tasty demonstration, I'll bet Tommy is a good cook on the grill too !!! 👋🌭🍔 😋

@414RadioTech Год назад

that would be so cool to bring back new Yankee workshop with Norm Abram I can't wait until that happens when PBS brings that back‼️‼️‼️‼️

@tetojoontoolsandtips Месяц назад

What if you have a really DRY HAND?

@annamariestarr 9 месяцев назад

What's sad is that the creator of saw stop wanted every brand to have access to this technology. But all brands were more concerned with their production cost increasing, than they were for the people's body parts who religiously buy those brands..

@buddybirddog8177 Год назад

A simple guide to table saw safety should include throwing that plastic push stick in the garbage and making your own out of soft pine, I have over a dozen push sticks of different designs for specific tasks. Those plastic push sticks can be a danger all their own when making contact with a table saw blade.

@tombeck2792 Год назад

joke, Tommy never uses a guard and splitter!

@mikev.1034 Год назад

👍🤘🤙

@debscamera2572 7 месяцев назад

what if you're wearing gloves?

@lakorai2 6 месяцев назад

Their patent needs to expire so affordable table saws can get this

@1252PFC Год назад

Don't understand the part where he says blade is ruined? What does it do that renders it useless.

@facklere Год назад

The brake (big chunk of aluminum) gets shoved into the teeth of the blade - that's what stops it and pulls it under the table. The force exerted on the blade is incredible and could damage it even if it looks okay on the surface.

@mitchdenner9743 Год назад

Well the blade is stopped ubruptly by sinking its teeth into an aluminum matrix at the speed of around 150 miles an hour, so it's not recommended to be reused due to possible stress fracturing or other weakening of the blade.

@1252PFC Год назад

@facklere thanks, that was helpful to understand

@1252PFC Год назад

@@mitchdenner9743Thanks, that was helpful to understand

@superspecialty5169 Год назад

Common man, the blade is way to high! 🙄🙃

@user-in2qt7tt1d 4 месяца назад

why you demo how the kickback happened!!! ???????? I just mimic your behavior and got kickback indecent today!!!!!

@ZeroColdx911 Год назад

2024 their parent extension will expire so we’ll see more safety features from other brands

@ja8898 Год назад

This is the only major tool I don't own. I have 17 hammers, two skillsaws and no table saw.

@RealMTBAddict Год назад

I have so many tools my landlord said I couldn't keep them in my apartment. Honestly it's not that much, they aren't used to seeing a man with a few toolboxes. And like a man I refused.

@mikeking7470 Год назад

You can get kickback with a circular saw too. In fact, I think it happens with more frequency that with the tablesaw, but your hands are away from the blade, so maybe a little safer. I've had it happen twice, once with a piece of plywood and once when cutting up a pallet. Scary.

@RazorStrap 8 месяцев назад

Kickbacks don't always go straight back. Demonstrations that I've seen and video of actual kickbacks. The piece climbs up over the blade and is launched at about 30 degrees or so. Right where Tommy is standing. Seems to me that standing on the opposite side of the fence from the blade would be safer. I think it is a disservice to indicate that kickbacks go straight back. Very over simplified.

@batvette Год назад

In 45 years of working around a table saw (sporadically as a hobby, not daily professional use) I refuse to use the blade guards or riving knives. Like many other safety features they introduce their own hazards. Several rules to follow. 1. Blade only as high as it has to be. 2. Never move the work backwards. 3. Push stick when needed. 4. Stand to the side if kickback is a risk. And.... I wont list this as 5 because its the most important. Never, ever, take your eyes off the spinning blade. If you have to look away for a second, keep it in the corner of your eye. A final tip is check the blade/motor alignment with the fence and mortar gauge groove when you first get a saw. Its common for them to be up to a full degree off. If its narrowing itll shoot your work at you especially if the blade is tilted.

@RazorStrap 8 месяцев назад

batvette wrote: "I refuse to use the riving knives. Like many other safety features they introduce their own hazards." Yet you did not cite even one. Probably they are insignificant compared to the safety they provide. Seatbelts can result in injury in an accident. Far more likely it will save your life or reduce injury severity though. There was a time when people would refuse to use seatbelts. But they finally wised up due to being legally forced. Now they wouldn't stop using them even if they could. Hopefully it won't take a serious injury for you to wise up. Years of experience is not justification for rejecting safety features. One of my brother-in-laws is seasoned carpenter for at least 5 decades. Almost lost a finger due to kickback a few years ago.

@batvette 8 месяцев назад

@@RazorStrap because the guard thats attached to it gets in the way of the blade, I dont need to fight that to get my work to the blade. Hey if you feel you need training wheels have at it. Most of us just got on and pedaled.

@RazorStrap 8 месяцев назад

@@batvetteRiving knives are not a training device (training wheels), to be used while learning to use the tool (ride a bike), then discarded.

@batvette 8 месяцев назад

@@RazorStrap I described why theyre a problem, why not address that. The guard interferes with the work cleanly meeting the blade and creates its own unnecessary hazard, just as I stated. Some brands do it better than others, but having to wiggle the work around to get it past the guard is a distraction I dont need.

@dansanger5340 4 месяца назад

@@batvette The blade guard and the riving knife are two separate pieces of equipment. The blade guard can sometimes get in the way. A riving knife rarely if ever gets in the way.

@BigcatMilo Год назад

Who puts a shop on the top floor?!?!

@mikeking7470 Год назад

Why not? Whatever works. There's a UK RU-vidr that has his shop in the attic.

@michaelcarroll991 Год назад

Its shabam. Shabam is right 😂😂😂

@albertorkenbjorken Год назад

if you play the video without watching the ending sounds like he is boinking tommy. haha

@AndreViens Год назад

Handburger

@boofuls 14 дней назад

First thing you should remove is your 💍

@RKMLarsen Год назад

I was really enjoying watching this video, but sadly I had to stop due to the blasphemy... 😓😓

@busted-sf2809 3 месяца назад

you .... are standing wrong. stop "teaching"

@lewiskelly14 Год назад

Everyone loves that saw stop yet nobody has put their real finger in it

@AaronGeller Год назад

you can find a video of its creator putting his finger in it

@batvette Год назад

You first

@RazorStrap 8 месяцев назад

Because it's expensive to replace the blade, brake and anything else that it breaks. Like an air bag. One use and replace. There is no test to verify if it's working feature. Probably a few people have put their real finger(s) in it though, and it saved them. So, they are not part of the injury statistics and not heard about.

@tollcollectorsquirrel342 7 месяцев назад

When I bought my SawStop table saw, guy at the store gleefully asked, “Wanna see the worst injury I’ve ever seen on a SawStop?” Turned out to be a cut that would require no more than a bandaid. 😂