*There’s a strange thing about vinyl.* *The song goes ”Put the needle on the record when the drumbeats go like this.” But in order to even hear ”Put the needle on the record when the drumbeats go like this” you need to have already putten the needle on record.*
did not understand the bit about the dots and why does the upper % has extra number 6, but not below...only has - 3,3 % ``´wtf ?? so lets say i have plate that has a track at 100bpms....if i slow it down - 3 , it will be 107 bpm ? will it be the same for both 33rpm and 45 rpm ?
You can't beat the old Qualtz Direct Drive & analog pitch SL1210 MK2 or MK5 even the M3D Japan for mixing vinyl records , every deck has failed to match it even today including the new SL1210 Mk7 failed !!!
Probably too much torque on your motor !!! Technics back then developed a Direct Drive with what's known as Quartz , this was a magnetic coil motor that allowed the deck to spin both ways easy without breaking the direct drive motor ,. pioneer all the others do not use this , that's why mixing records ain't the best , they use a laser direct drive hanpin motor system
HELPPP🙃 first of all thanks ellaskins for the videos I'm new to mixing I'm 37 and just bought deck's✌ I have a problem. I have x2 same songs and tried to beat match. I turned quartz off, both were in center position. But when played at same time one deck played faster. So I used a screwdriver and adjusted the pitch adjustment screw. They are very close bpm in centre position. Takes a minute or 2 before it goes out of beat. Do I need to adjust screw back? Have I messed up the pitch control🙈 and more importantly DO 2 DECKS PLAY AT EXACT SAME SPEEDS IN CENTER POSITION WITH QUARTZ OFF? OR ARE ALL DECKS SLIGHTLY OUT. Anyone with any advice. I'm loving learning wish I started in 20 years ago🙈
@@ellaskins the main man himself 👍your videos are amazing. You explain things well and helped me loads. As for my decks they are Sony dj9000 direct drive (cheap) Was going to get 1210s but didn't know if I would get on with it. But I'm having a blast. With quartz on they match and stay in beat👍. But if both pitch are in the middle. Then I turn off quartz then the one deck would be too fast. After many hours and fine adjustments I have it so they stay together now for ages at 0% pitch with quartz off. My main rookie mistake was I was messing with the weight on arm . One was at 1.5 other was 3.5 🙈the 3.5 was slower. I set them both to 2 and they are running great. I'm thinking the extra 2g weight was causing more drag. I'm actually going to spend a couple of hours on them now see how it goes. Keep up the videos your sound. I tried watching other people but they are like robots and I switch off😂 LEGEND 🔈🔉🔊