I was about to post it after 30 seconds watching. I was also mentally prepared for the piece of wood getting catapulted by the blade while he is walking around.
Of course he has 10 fingers, it's only brain cells that he is lacking. No push-stick, no guard, no savvy. Never mind all this POLITICAL video banning and de-monitising, RU-vid, how about abject IGNORANCE and DANGER as a reason...
No safety measures using the table saw at all. Wow. You're lucky you still have fingers left. No guard, no riving knife, no push stick or feather board, no hearing protection, no mask, no eye protection. No words. This is everything you should not do.
Damn, some of you people get way too hung up on safety shit! My shop is similar, not a guard in sight on much of anything. I have been working like this for many many years and yes I still have all my fingers. When you fire up one of these tools, you need to give the tool your undivided attention and respect, and not have your mind wandering on something else. Don't get distracted and know the tool you are working with! Pay attention and always know where your fingers are relative to where the blade is and be aware of what could go wrong and how. That is the advice I was given back in the 1980s when I started wood working and have been fine ever since. I always wear safety glasses, but that is it.
So, at around 3:57 I realized I am watching this just for fun, not to actually learn anything I can apply to myself because I don’t even know wtf that machine is
I have the same question… specifically rr the machine immediately prior at 2:26, which is the same machine - essentially a horizontal table saw. Maybe a horizontal slot mortiser or tenoning machine.
This is a level of skill fading rapidly in the USA along with common sense. I admit it is a little scary in some places even bearing in mind the accelerated motion, but still it is very hard to find videos that illustrate the entire process from beginning to end. I just wish I could find something similar for double hung casement windows which I now have to make for my circa 1915 Colonial home. I would pay well for something like that and/or a video illustrating 6 pane divided light double hung windows . Hats off my friend, you are a true craftsman. Be careful of your fingers.
He's using what we used l o n g before health and safety reps - common sense! Besides its the health and safety at WORK act. If hes at home on diy the rep can have a day off, bugger all to do with him!
Why so many complaints? This is not your cable TV favorite diy crafsta-wanna-be-hafta an American fancy channel with all that fancy tools. Learn to respect simple guys that doing work with their hands. And learn some craftsmanship.
there is zero reason why you wouldnt have the splitter installed. also, push sticks. NEVER push the final way thru with hands. just asking for amputation in this video. do better. set the proper example for the youts.
A horror show.No guarding on the machines.Those thin strips covering the floor around the spindle,very dangerous.Clamping of metal strip to spindle fence-bad idea!Why not Use the spindle table slot,to be able to use a slide carriage,with a clamp.
I am not a carpenter but I thought the same. The window making video and lesson are GREAT, no comments about that. But while watching the video I thought there were plenty of situations in which accidents and very severe injuries (even death-causing injuries) could have happened. For example, there is a bit where he drills holes in the wood, pushing the power drill towards himself. If the drill would have slipped, it would have gone right through his belly, God forbid. Worse than a bullet.
Thanks for such a great video. I watched the video many times it's very difficult to detect the details. I will appreciate if you kindly let me have the measurements or photos of the individual parts. Thanks
What this guy does in his shop is his own business. If he chooses to practice dangerous techniques then so be it. HOWEVER, when you put a video on RU-vid, others, less skilled and less knowledgeable may copy these techniques and suffer the consequences. If you're showing others how to do something it must be SAFETY FIRST!
Nice frames but gee,, ,,, wished he would of shown how a more simpler man would make them. Not many people have those machines that cost thousands of dollars in there basement garage, lol,,
You should start your own business and make window kits and sell them. I would buy several of those. Here, in America all you get is crap now. We used to have good quality products, but now everything is made cheaply and never lasts. Not like your window would. GREAT JOB!
Pensé que era estación de radio; 🤣😂🤣😂 si escuchas esa música del infierno mientras trabajas tienes suerte de no haberte cortado los dedos.👎👎👎👎 ¡Me salgo!, donde si enseñen carpinteria y no musica 🤣🤣🤣 I thought it was a radio station; 🤣😂🤣😂 If you listen to that music from hell while working, you're lucky you didn't cut your fingers. 👎👎👎👎 I go out!, where if they teach carpentry and not music 🤣🤣🤣
Holy Christ if ever you want to show how to use every machine with the potential for serious injury this is it. Horror story in the making. Dust extraction whats that! Spot the hazard competition.
That is an awesome sander.. would love to build a wide belt sander like that someday that had a more permanent/flat platen all across than the by-hand one you are using but that is a very cool design nonetheless
Having personally seen a guy chop his leg off (faulty guard on skill saw, which he didn't care about), another guy lose 2 1/2 fingers in a table saw (no push stick, wood grabbed and ripped against fence), and another guy a finger in a jointer (no idea how as I only saw him running by, but he insisted on not using guard or grips), I wouldn't recommend this video to anyone.
99% of shop accidents occur because of operator error....not faulty guards, not bad equipment or a cluttered shop. Guards, for the most part were created to satisfy insurance companies and OSHA regulations...NOT for the safety of the operator. If a guard is blocking your line of sight it is more likely to cause an accident that not having the guard at all.
@@bill5552 -It is called an accident because that`s exactly what it is.Nobody sets out to lose digits.The guards are placed to prevent people coming into contact with the cutting edge.Not using guards is plain stupid and negligent!
I don't understand why the automotive industry hasn't evolved yet. They've got Gorilla Glass on the Ford GT 40. I know they have a 3 layer glass now that meets certain same standards. So how hard is it to put two thin shells of glass together with Nitrogen in the center to prevent fogging ??? It's because of the cost they always tell you but think about it how many times ??? It's like this mask on my face it doesn't fit right. You need such & such approved mask. It wasn't like this when Covid 1st came out ??? How the "F" does the price of Bacon go to 7$ a pound? When most of the time there selling you Fat? I wonder How; I got both of my shots, but I'm starting to wonder what they're selling us next? Capitalism is what Capitalism is. I've earned everything I've got in life. But now I've had to go through back & neck surgery. And there's nothing right about that!!!
HOLY CRAP I want that jointer!! It must be worth a fortune. There are some TERRIBLE work practices happening in this video but it's up to the individual to practice personal safety. Also, I had to watch with the sound off because I hate when videos add music for no reason.
Hey my guy, um...did you know that the word "simple" is in the title of this video? Who is this even for? Anyone that has that machinery most certainly does not need to consult RU-vid to learn how to make a window.
That window would leak when it rained. Then in a year or so... the wood at the bottom of the window will rot... and then... you can build yourself a new window.
@@TheGoldsholl "You are correct... I might be wrong." I certainly do not know everything. At 74 yrs old... I am still learning. Merry Christmas from Texas.
As you run the wood through the table saw you can use a small piece of wood (instead of your hand and fingers) to push the last bit of lumber passed the blade. He eventually did use a push stick on one of the last pieces. Probably an afterthought.
Your workmanship is excellent, I understand about the safety standards in your country. I've worked in both Greece and Turkey and it's the same there but you can lead the way and set the example for others by making your workshop clean and safe. God bless and keep up the good work. Thanks for sharing your video.
You're talking about my uncles. Of the four there would be thirty-five fingers and thumbs between them. I'm in my seventies and my son-in-law and his three brothers are all journeymen, with a total of forty fingers and thumbs ... one is known as "Safety Sam". His company, a major contractor, is purchasing Saw Stop table saws because it's cheaper to have the machine repaired than the loss of time and wages for an injured carpenter, plus the time and expense of all the paperwork involved by the supervisors for the insurance companies.
Watching your video reminded me of my grandfather and his four sons. They have all passed on now. Not one of those five men died with both hands undamaged. Two of the brothers buggered up their hands on the very same saw. My Dad put his hand on the jointer as he leanded over to pick up something. My grandfather and the other uncle used other machinery. The shops they worked in looked much like yours. Junk all over the shop, sawdust everywhere, no protection for eyes, ears, lungs or hands. I really wanted to learn something about making window frames but I'm sorry, I just couldn't watch the entire video. Too many sad memories.
At ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-l3uW7OngOuQ.html isn't the stile upside down? Don't all the rebates face the same way? I am trying to teach myself to make some window frames. Thanks....silly mr I should have watched it all the way through...thought it was two different sized frames not part of one assy. Do you have a sectioned drawing for this type of window?
How do you figure? There is go guarantee he will lose a finger despite the fact he increases the probability of having an accident by not using push sticks, which COULD result in loosing a finger. Then if he did lose a finger there is no guarantee he would then start using push sticks. XD
