Тёмный
No video :(

Simplicity 4040 PowerMax Project Start To Finish Full Video 

isavetractors
Подписаться 50 тыс.
Просмотров 211 тыс.
50% 1

#Simplicitypowermax #gardentractors #isavetractors
In this video I combine all 7 Parts of Our Simplicity 4040 Powermax Rebuild Series and combine them into one long video.
Play it while you're making dinner and enjoy!
iSaveTractors Designs, Develops, and Sells Engine Parts for Vintage Small engines! Engines like the Kohler K Series, Magnum Series, KT Series, Tecumseh, Briggs Cast Iron, and Onan Engines!
Check us out at:
www.isavetractors.com
We also have Hats, and other Merch!
isavetractors.com/hats/
Like, Share, Subscribe
What was done to the Tractor:
- Rear PTO Shaft Repair
- Hydro Control Lever Repair
- Throttle Control Wire Repair
- Stator Rewind
- New Key Switch and Regulator
- Custom Air Filter Mount
- New Tires
- New front Wheel Bearings
- New Drop Housing Bearings
- New Transmission Oil
- New Motor Oil
- New Oil Filter
- New LED Light Bulbs
- New Wiring
- New Seat
- New Drive Belts
- Custom Seat Mount Made
- Hood Repair
- Exhaust Replaced
- Repainted
- Brake and Clutch Adjustments
- Filmed for your enjoyment
Watch the whole Simplicity 4040 Series:
• Simplicity 4040 Garden...
Amazon Affiliate Links for RU-vid:
Micrometer set I recommend:
amzn.to/2T8nW4u
Micrometer Holder:
amzn.to/2Gg4b7D
Telescoping Bore Gauge:
amzn.to/2S0GciX
Wrench Set I Use:
amzn.to/2RSwz71
Impact Sockets I Use:
amzn.to/2FTfzXD
Favorite Shop Knife:
amzn.to/2CSHyCT
Digital Calipers:
amzn.to/2SaOy80
Feeler Gauge Set
amzn.to/2FUFw9u
Safety Glasses I wear in the Shop
amzn.to/2S9TDgK
My Fluke Multimeter
amzn.to/2Sj3OzP
Torque Wrench:
amzn.to/2CMx9sq
Linesman Pliers:
amzn.to/2WtpDvw
Flywheel Puller:
amzn.to/2t2GIiC
Valve Spring Compressor:
amzn.to/2V6NFuR
Ball Hone:
amzn.to/2XDAiU4
Edging Material for Tractor Restorations:
amzn.to/2MtyegM
Wire Crimp Connectors:
amzn.to/2KMGHZY
Music: www.purple-planet.com
Music: www.bensound.com/royalty-free...

Опубликовано:

 

21 июл 2019

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 254   
@Isavetractors
@Isavetractors 5 лет назад
Hey Thanks for Watching. Keep in mind this is from a 7 Part Series with sped up and cut footage. If you want to see the rebuild with more details and voiceover check out our playlist on the 4040 Project. We are already putting the machine to work. To see photos of it in Action be sure to find us on Facebook and Instagram!
@tomr3074
@tomr3074 4 года назад
Do a few sears sometime ,one single and a twin olan
@leehicks5219
@leehicks5219 4 года назад
I liked and subscribed, hope it helps, have a Blessed Day.
@normanapplegate9678
@normanapplegate9678 3 года назад
Just found one in a field. 60 inch deck with push blade. Turns over and can feel compression. Any idea what I should offer.
@TheSoloAsylum
@TheSoloAsylum 4 года назад
While watching this I mixed cinnamon toast crunch with frosted mini wheats and accidentally created the greatest cereal ever created.
@mikemoore9757
@mikemoore9757 5 лет назад
You earned that tractor, young man! That's beautiful.
@aaronb4936
@aaronb4936 4 года назад
As a John Deere guy.... I concede these are among the coolest garden tractors ever made.
@MrCountrycuz
@MrCountrycuz 2 года назад
You mean the most complicated and over designed tractors ever made. What exactly can this tractor do that a Sears Suburban could not do? Which would you prefer to work on?
@captainedc
@captainedc 2 месяца назад
​@MrCountrycuz well for one the category 1 3 point hitch and rear PTO is immensely great to have and use. Plus the big rear tires always help a TON with traction on a small 2WD tractor. The hydraulics and hydrostatic is another highly needed feature if your going to do any real work besides mowing a field. That's just for starters.
@jimfling2128
@jimfling2128 4 года назад
I bought a 4040 in 1973 with a deck mower, a 60 " tiller and Danco front loader. It had Turf tires and heavy duty tires in the front. I used it for almost 30 years. Rebuilt the engine once and repaired the transmission once. The front kingpin axles broke several times and I made new ones. The rear wheel drive axle broke once and Case made a new one for $150. Great tractor I used it almost every day and sold it to my neighbor when I moved and he loves it and uses it a lot.
@Isavetractors
@Isavetractors 4 года назад
Wonderful story. Thanks for sharing!
@Aspire2Cycle
@Aspire2Cycle Год назад
When you started it up there at the end. The sound the Owens engine made takes me back to the 1970s when my father was head groundskeeper for the University of Iowa and they used two AC 720 tractors for mowing and snow removal many years. The mower deck on the AC 720 is not what you see today, or most decks are stamped steel, AC and simplicity would weld up the decks out of plate steel. The only problem my dad would have is that when it was really hot in the summer and they would park the tractor for break after running it for a few hours, the engine was sometimes the vapor lock. You restoring this brought back a lot of fond memories of me and my father and the time I got to spend with him! Thank you!
@chriscole1136
@chriscole1136 3 года назад
Your hoby is saving history
@braddegraffenreid9106
@braddegraffenreid9106 4 года назад
Great video! This man is extremely intelligent. I’ve seen some of his other videos and it seems that he knows a lot about it wide range of small garden tractors. Thank you for sharing!
@j1166240
@j1166240 2 года назад
Norman, OUSTANDING JOB with this restore! I truly envy your talents and thank you for putting this video together. Even without the dialog on all the issues you may have run into, was still a fascinating video to watch!
@rottmanthan
@rottmanthan 4 года назад
old garden tractors are much nicer than todays crap.
@tmq1384
@tmq1384 3 года назад
Every Onan starts and sounds the same, with that distinct whine as they run. Unbelievably durable engines.
@jamesnardella7794
@jamesnardella7794 5 месяцев назад
Beautiful Work! Very impressive
@osimnod
@osimnod 5 лет назад
Impressive transformation, Norman! Particularly the pressing out and in of bearings and rewinding the stator. Beautiful work all around. Also shows how beneficial it is to have the right tools. I've watched Jason1Pa rebuild an old Ford 8n tractor, too. These smaller tractors really fill a need for those of us on smaller properties yet need the muscle and attachments of the big boys.
@is_that_blake_1619
@is_that_blake_1619 3 года назад
Im a sucker for this brand I don’t why but I just love them
@Isavetractors
@Isavetractors 3 года назад
You love them because they are awesome!
@933brian
@933brian 4 года назад
im a semi retired heavy equipment mechanic there is a sence of acomplishment when its done thats why we do this have brought back to life several old farm tractors over the years now working on 1956 cat 933
@frios011
@frios011 2 года назад
What patience and dedication. You sir are a gifted fellow!
@leehicks5219
@leehicks5219 4 года назад
You done a great job on that rebuild, Praise God for giving You the talent to do that.
@dbracewell4591
@dbracewell4591 5 лет назад
It's not much but I can't tell you how much I love you for doing what you do I wish I had a son like you ✝️✝️✝️
@OutoftheWoods0623
@OutoftheWoods0623 3 года назад
awesome job,
@kevinmccarey5015
@kevinmccarey5015 Год назад
Hello to you , Stunning Restoration Be well
@bobdevarney9433
@bobdevarney9433 Год назад
You've got me itching to finish restoring my '76 Broadmoor tractor.
@jimbobber2125
@jimbobber2125 3 года назад
Wow I would love to own one of these. I would use it as a Mobility Scooter. Beautiful
@servihomestead4324
@servihomestead4324 5 лет назад
Awesome. I like seeing the whole process wrapped up in one sitting as much as the detailed repairs. Nice air filter adapting!
@mr.skeptical3071
@mr.skeptical3071 Год назад
That thing is sick!
@paulwhited117
@paulwhited117 5 лет назад
Great job. And video. I used to have a AC 720 and this makes me really miss it. Was completely intact but always wanted to repaint it. So thanks for the video.
@1951shelby
@1951shelby 3 года назад
Awesome job Norman, you breathed new life into it
@kubotaman3440
@kubotaman3440 4 года назад
I had a model 4040 tractor I Started my ground maintenance business with it had many attachments 60" belly mount mower a 60inch sickle bar mower 5' rotortiller. 5' snow blower 5ft dozer blade 5ft landscape rake rear grader blade
@Biokemist-o3k
@Biokemist-o3k 2 года назад
Totally incredible job with the tractor and incredible soundtrack as well......!!!!!!
@ChillkootMarkowee
@ChillkootMarkowee 5 лет назад
Holy crap the front wheel bearings on this Simplicity Powermax are just like an old-school rear wheel drive car's front wheel bearings! And man its pretty funny to see that Onan twin is so heavy it needs an overhead engine hoist to lift it up!
@phill903
@phill903 5 лет назад
Nice rebuild project the Simplicity 4040 PowerMax looks like it's ready to do any thing ;-)
@upstaterelicsandescapades1599
@upstaterelicsandescapades1599 5 лет назад
I have recently been given an Allis Chalmers lawn/garden tractor and it appears restoration may be a daunting task, but it should be fun(and expensive) but, just recently having retired, I'm up for it.
@Acoustic_Theory
@Acoustic_Theory 5 лет назад
Be sure to bag, tag, or label every part you take off, so you know where to put it back on. Strip it down to the frame, power wash and paint the frame, then build it back up. Sounds like a good project to kick off your retirement.
@johnhall1614
@johnhall1614 3 года назад
My favorite garden tractor allis or simplicity models like this. I have never owned one, never have pulled the trigger in getting one
@daviddelaet8116
@daviddelaet8116 Год назад
Very nice 👌 👍
@stevejuststuff2779
@stevejuststuff2779 11 месяцев назад
Just found your channel. Beautiful work. Liked and subbed
@bubbyhardy6135
@bubbyhardy6135 3 года назад
Hey man, dont know if you have heard of the trick but its for painting rims. Get a new deck of playing cards and stick them long ways end on end overlapping just a bit and it literally takes 1 min to "tape" off the rim to paint it. My brother showed me the trick and i was so amazed at how much faster it was lol. Great video and a beautiful tractor man, congrats.
@jimmypopp2695
@jimmypopp2695 3 года назад
So Awesome.!
@oldironsfury
@oldironsfury 5 лет назад
What a great outcome on some more old iron! 👍👍
@rauldemoura2417
@rauldemoura2417 5 лет назад
Dang Norman!! Very well done my MAN!! I LOVE that little tractor. I wish you were closer to me,... I would love for you to rebuild my Gravely 8123-G.
@twofast4nu
@twofast4nu 4 года назад
That's awesome. Those tires look amazing on there!
@Z-Bart
@Z-Bart 5 лет назад
@9:17 I have seen people use recipe cards overlapped instead of tape. I suppose both work just fine. Beautiful restoration! 👍
@TonyGeneseo
@TonyGeneseo 5 лет назад
Awesome job Norman !! Don’t forget about all of us that started watching these vids ! I know your busy and things are boomin and couldn’t b happier for you ! But a little more regular on these videos would be awesome !! :)
@Isavetractors
@Isavetractors 5 лет назад
I'll try! Busy busy
@TonyGeneseo
@TonyGeneseo 5 лет назад
Well busy is good !! So happy for you !! Always super proud of anyone living in Maine that’s killin it like you have been !!!
@eggiecortes2732
@eggiecortes2732 2 года назад
Saludos norman feliz año Nuevo excelente video
@philipolah7279
@philipolah7279 2 года назад
Awesome Job Brother !! Lot of Work but Beautiful Tractor !!
@jasonashley1632
@jasonashley1632 2 года назад
Rewinding the stator so impressive great video
@fhagerber4079
@fhagerber4079 5 лет назад
Hi nice video thumbs-up from me what you need is a sandblaster thx for sharing
@bendailey6070
@bendailey6070 5 лет назад
Awesome! Great looking tractor.
@AndyGenova-jr9ol
@AndyGenova-jr9ol 10 месяцев назад
I own symplicity n allice chalmers tractors i keep them up but not restored bulletproof tractors great vid my brizzo
@scottmoorhouse5664
@scottmoorhouse5664 5 лет назад
down here in southern new England. your video sure brought back memories of lusting after one of those as a teen at a local dealer. thank you
@F.H.H.B
@F.H.H.B 5 лет назад
Nice!!! Can't wait to see it in action.
@jarrhead3538
@jarrhead3538 4 года назад
I’m months late, but cheers to rewiring that thing. I did the same with my Ariens GT17, she’s running beautifully now.
@merrymanrc
@merrymanrc 5 лет назад
You did a great job on that simplicity it look almost like new one
@Homer19521
@Homer19521 4 года назад
I love it. Great looking tractor. Nice job. Thanx for posting this.
@herbertmeade348
@herbertmeade348 5 лет назад
started to watch a little whilw but couldnt stop till the whole thing was done,,,fantastic njob
@kingtut5923
@kingtut5923 4 года назад
WAY TO GO NORMAN love all your shows great info
@michaelbland324
@michaelbland324 5 лет назад
looks like it just rolled of the showroom floor.Great job
@captainedc
@captainedc 2 месяца назад
Fantastic job. Owned a lot of tractors over the years but never one of these. Now you peaked my interest. How are they plowing ?
@jonathanolsen7254
@jonathanolsen7254 2 года назад
Man that was so Cool..
@michaelbenoit248
@michaelbenoit248 4 года назад
The thumbnail is truly stunning! Love it.
@eclipsegst9419
@eclipsegst9419 4 года назад
At a certain point I noticed the bottle of Valvoline Premium Blue that kept popping up in the background and started wondering where I would see it next lol. Great oil btw, I use it in all my mowers, antique tractors, and my pickup truck!
@khukman1
@khukman1 4 года назад
Amazing work, it's nice to see good work, with attention to detail, but not a "pie-in-the-sky" rebuild that costs 10s of thousands of dollars. Older Simplicity tractors are tanks!
@robertdavis6708
@robertdavis6708 4 года назад
Nicest 4040 I 've seen . You did one heck of a job on it Ivan. I've got the 20 HP version on my Wheel Horse . I love the way they rumble. And what torque they produce. I'll be looking you up for a kit on my 65 WH 8 HP hydro. Good luck with your future projects .
@bvr1962
@bvr1962 2 месяца назад
I stumbled across your video and noticed Bracket machine I to am from Maine it really is a small world
@chakravarthyc2603
@chakravarthyc2603 4 года назад
Hi, You did a very good repairing work in good Mannar. God Bless you sir.
@saulgoodmanfromthehittvsho1314
That's 100% a beautiful tractor! 👹👹🇺🇸🇺🇸❤❤😍😍
@mikerafone4736
@mikerafone4736 4 года назад
This is one heck of a machine, wish i had one.
@olivertaylor8788
@olivertaylor8788 3 года назад
Nice job...
@OleGramps53
@OleGramps53 5 лет назад
Great recap video ! I watched the actual series as you were doing the rebuild.
@Don_ECHOguy
@Don_ECHOguy 5 лет назад
Great looking tractor... I have seen your collection and you are a Master at what you do. It is also a pleasure to watch you work! 👍
@tylerclementi4272
@tylerclementi4272 5 лет назад
Norman this has to be the best restoration you have ever done, just wow...
@paulg444
@paulg444 4 года назад
He is a national treasure!
@jimmydickson8854
@jimmydickson8854 4 года назад
Brilliant job mate a lot of work you are very talented especially on the electrics well done
@fredsiegfried1707
@fredsiegfried1707 5 лет назад
Hey Norman, you shot gunning with me to bring a 30 year isolated Wheel Horse D200 back from dead in mint condition in Pittsburgh, PA, hasn't ran in over 30 years, lol, I'll need a cold one after this adventure
@robertgonzales5515
@robertgonzales5515 3 года назад
Awesome job Man !
@robertjordan9075
@robertjordan9075 3 года назад
Nice work.😎👍🏽👍🏽👍🏽
@stevenbranham5285
@stevenbranham5285 4 года назад
Love the attention to detail
@outragousbob4367
@outragousbob4367 3 года назад
Love your Channel Norman! You need a sandblasting setup, it would greatly save you time and effort. Happy Thanksgiving!
@raymonddargie6594
@raymonddargie6594 2 года назад
Do you ever rebuild tractors for customers? If so, I have an old Bolens pipe frame tractor {early 60's vintage} that needs carb. and electrical work the rest is fine.The tractor was given to me by my next door neighbor.
@Northeast_Mainiac
@Northeast_Mainiac 4 года назад
Beautiful, reminds me of my dads old Simplicity
@johndeeregarage5339
@johndeeregarage5339 5 лет назад
Nice Norman she came out beautiful
@asus12351
@asus12351 5 лет назад
Great work as always loved every minute
@rickolson9011
@rickolson9011 5 лет назад
Great video Norman!
@darellsunderlin4670
@darellsunderlin4670 5 лет назад
Nice job , was there a reason you didn't paint your rims when you took off the old tires ?
@jasperpetersen8241
@jasperpetersen8241 5 лет назад
i have an old ford i think from the 70`s lawn tractor it looks amazing and i wish i could send it your way
@TheEsquad11
@TheEsquad11 Год назад
You are amazing
@TheTeetee85
@TheTeetee85 4 года назад
Man awesome video!! It came out great!
@jessegreco6818
@jessegreco6818 5 лет назад
AWESOME!!!!! Time to setup an infinite play loop!!
@johnpoelking6249
@johnpoelking6249 4 года назад
Great work.looks like it was made yesterday.
@jamescoleman7764
@jamescoleman7764 4 года назад
Love the tractor, great work. Where do you get your decals? I've got an old Ford YT-16, one of the hood decals has started peeling off and I'd like to put another one on it.
@clearskyamerica3107
@clearskyamerica3107 4 года назад
Wow, mind blowing. That is really good work and I can't imagine how many hours went into that.
@nbookie
@nbookie 3 года назад
I kinda liked the idea of an alternator. Could put a good 300amp unit on it and run a nice 3k pure sinewave inverter for a nice back genset.
@MichaudDaniel
@MichaudDaniel 4 года назад
good paint job.
@stephencampbell4145
@stephencampbell4145 5 лет назад
That was a great rebuild enjoyed all its videos👍
@michaelfield9467
@michaelfield9467 4 года назад
Hey Norman you have mad skills i know that the simplicity’s are unusual but I like them good job 👍
@danslawncare8594
@danslawncare8594 4 года назад
I love it. Good job.
@michealfarley9423
@michealfarley9423 5 лет назад
Incredible detail!!! Love watching stuff getting brought back too life!!! Wish I had the internal patience too do this kind of rebuild!!! Keep up the awesome content!!!
@dannystubblefield5478
@dannystubblefield5478 4 года назад
That's Nice- great job
@danjenkins5704
@danjenkins5704 4 года назад
Enjoyed this, nice work
@raymondj8768
@raymondj8768 5 лет назад
Great job shes a beauty !!!!
@charleschapman2428
@charleschapman2428 5 лет назад
Have you ever tried to put the decals on with a soapy water spray bottle? I've done quite a few and it's very forgiving and you can reposition as needed.
@PABackyardRevivals
@PABackyardRevivals 4 года назад
I have a 3415 garden tractor and its like a mini me to that same hood and all
Далее
Simplicity 4041 Powermax Garden Tractor Walk Around
9:18
ТЫ С ДРУГОМ В ДЕТСТВЕ😂#shorts
00:55
Сервисный центр в Ровеньках
00:27
FORD LGT 165 " MINI 9600"  WORKING THE GARDEN
9:24
Просмотров 4,5 тыс.