Six Channels 1500 watts! CT Sounds ATv2-150.6d Car Audio Amplifier Unboxed, Powered up 

There are lots of ways you can use a 6 channel amp. This is the way I would more than likely use one. So this amp on a set of 3 ways and a dedicated monoblock on the subs would be a solid choice with a much smaller footprint and a lot less wires. Of course, as stated in the video, you can run your entire system off of it if you want to! Link to more info on this amp amp in the description! Thanks for watching if you did!

CT gets slept on way too much. My entire system is CT and it sounds awesome!

3-way front stage, using all active crossover filters with a monoblock for subs for the win!

You always have the best music playing in your shop!🤘

Only a handful of Car Audio channels I'd sit and watch for reviews/bench tests and SMD is DEF the 1st stop

I was thinking about doing an entire NVX system until I seen this amp for $360 😳

Man we appreciate the advice. Sounds clean

I remember i wanted this for my build in my 01' Pontiac Bonneville. This amp was perfect for that car and all CT speakers too. 😊

That white paint and plexi bottom, Straight out of 1996, I love it

I like how well you set that amp up! An ,matched with an active dsp like that one wow, clean an amazing . Well done steve . Thanks for posting .

I also love the size of this amp, you gets lots of channels in a compact size package.

Always a good day when Steve puts out a video, shoutout from Texas!

Got this amp in my 02 tahoe runinng my 3 ways. Works awesome

Im partial to the JP77 7-channel amp 3k rms output. channel 7 is 2k watts rms. It truely can run a mid sized system. But im sure its $$$ more over the CT Sounds in the review. I run it with all channels bridged and it powers my 10" Focal sub, 2x 300w rms bass shakers strapped to my seat and channel 7 is powering an 18" Incriminator Audio Flatlyne IB sub. i use a 2 channel front stage and my rear fill if needed and 2k watts for subs if i went that route.

I'm all for The AT series of CT Sounds. My bias is my car is a similar blue, laced in white in and out. I still have the AT1400D and AT200.4D in an old Scion. With little use and a lot of sitting - they have lasted some years and perform well.

Would love to see SMD collaborate with @ctSounds and use this and all ctSounds other top tier items in that tidy Honda sedan!!!!

I still have an Audio Technix Stratos 15", from back before they changed the name to CT Sounds

That’s a beautiful amp. Sometimes I wish the manufacturers would offer an amp with a clear top and basically an amp with the guts also mounted inverted so we could always see that “bottom” view. Would look epic at night with some soft glow on the internals. 🤤

Nice amp for your whole system thanks for sharing meade916.

I had this same model of amp for a little while back in early 2022, on six Deaf Bonce 6.5" midrange speakers @ 4 ohm each. It did pretty well I'd say. I posted a video awhile back, incase anyone here wanted to listen. I wasn't running any tweeters or any subwoofers in the video, so it's all just midrange for the most part

Bro i love it when you do reviews! U shoot the shit straight ive looked up to u in the bass world for years way before u painted the tahoe!! Keep it up bro!

Can you do a video on how to get more outputs on a aftermarket radio that only has front rear and sub

Dang, it's either these ctsound or the audio control d-6 for my next build :D

Just my opinion but nothing beats a class D amp and really its nice to see a space saving 6 Chanel class D

Sounds crisp! Would love to see your take on some DS18 product! If not, cool. Appreciate the upload!

I’m seeing a lot of reviews on the ct sounds, they coming up and definitely coming from Houston Texas 🤘🏽

Love the color and shape. Reminds me of the old PPI Sedona amps

@meade916 what about running 3 pairs of the CT Sounds Meso 6.5” 3-ways on this 150-6? Using the crossovers included each set of 3-ways couldn’t that give each side of a set it’s own channel? With 2ch per set & having 3 sets that would be 6 channels. I’m debating doing this to a 1991 single cab Stepside Chevy OBS with that amp & three pairs of those 3ways & a CT sounds ATv2 3000.1D for two JL Audio 13TW5 shallow mount subs that are 3ohm each single voice coil What’s your opinion is that logic of 3 pairs of 3ways for that 6ch amp wrong?

I have CT2000 MONO BLOCK pushing 2 Rockford Fosgate punch T1s 10inch. In my semi, and im tell you, that CT Sounds amp is no joke!. Its a beast of an amp for real! And a small footprint too. And i have that Audio Control x-over in my closet! With EQ To go with it. Along with a whole nother system!

Great video and info. Versitile and simplistic. I did rear fill for years. Decided to leave it out in an suv setup one time and with time alignment i didn't miss it. Imo, i feel it sounded better. Like a "stage" as its referred to for a reason. Sq, sql... spl blow that stage out😂

Im debating on a ct sounds at2300 or sundown audio sia 2500 for my kicker solo x 12 , this amp is beautiful

I’m starting a new system with a five channel running the entire vehicle.

I've spent about $3k on overthinking and buying for my current system but this amp and 4 of their Meso 6.5" 3-ways are ready for install. Plus a JBL 600w mono and basshub, Hertz H8 for active front stage, soundproofing, all copper 0 gauge double power runs. Mic/REW, and so much more. Considering some cooling options? 🤷‍♂️ but trying to keep it looking as stock as possible. HU is currently only my old Kenwood with a big ol' KNOB thank you very much (insert joke). Might just keep the rear speakers passively crossed over and use an Alpine KTP445U I have, not sure yet... Whole setup is overkill cuz too much time on Amazon at work and not enough at home ugh. But I wanna do it RIGHT, no janky rigging, as I've DEF done that when I was 18🤣 Truly need to make blueprints so I don't miss a step but she's gonna sound sick whenever I get the time to install it🙄... Would love to see a torture test for this amp tho cuz I'm kinda gambling on it 🤷‍♂️ Got the speakers first and $800 later they hooked me with their marketing LOL.

For 350 bucks you can power a fully active 3 way set…. Not bad at all… maybe see a Black Friday deal too!!

I wonder if anyone has installed the Down4Sound JP77 amp? I would love someone like you to test it in a real world application. Great vid brother.

Would -LOVE- to see this run up with the Mmats 6150D for sure👍🏼 Almost Identical output..

I’m wondering what Frequency’s you set the B2’s at. Like each one tweet / mid / etc. I’ve got same set and I can’t figure out where they each need to be at. Or at least around what #

they need to do an amp all see threw that would be amazing for demos

Wow.!! That thing looks sweet AF!!!

1st ... bass head role call?

That sounded great coming!

Only 400 $ ?

Hey i have 2- 4 ohm super tweeters in tha a-pillars, 1 in each door so 6 total, 8-4ohm 6 1/2 in the doors,4-6×9's in the rear deck of my 2007 Toyota Corolla with 2-12" skaraudio on a 2000.1 amplifier what do you recommend on a amplifier or amplifiers to run my mids,highs less amps as possible thanks

I have two of the v1 of this amp I love them

wow that look reminds of the old PPI amp.

Could you use that on a system for just the componets on a 4 door car. Or would you have to buy 2? I guess im asking could i run 2 speaker per channel?

When u think u can do a amp dyno ?? I like to run it at 2 ohms maybe 4 mids and 2 tweets per door

Damn! I needs this in my life, is this the only brand with a 6channel? Keen to replace my crappy factory speakers with some decent 3ways ( possibly a sub and monobloc later on when cash allows lol )

What terminals are you using for the power/ground and the speakers connected to the amp?

Oh yeah love this !!! ❤❤❤❤

Hey meade916 whats better between dc subwoofers level 3 or 4 in 10 & 12" and would it be better than ds18 exl X thanks

Great idea!

Whats good amp. 4 arnolds 6.5s & 4 neo super tweeters

really nice amp ..

Can you do a review on the 150.4 amp? Interested in getting that amp for my 8" sky high mids

@meade916- That 3 way set sound's awesome, just free air! How much $ for that 3 way set?

AIN'T THAT A LITTLE 2MUCH ON THE TWEETER?

So how do you know when you don't put 150 rms Watts Into Your tweeters

You don't like Down for sound amps?

I miss bumping 😢

Please review jl audio jd400/4 amplifier and jl audio c2 component And rockford fosgate p3 d412

Fuck I was looking to get one of these earlier this year

Man I need a amp bad ...

Manual says 500x2, this is a misprint? I'm guessing

Eu curto teus vídeo no brasil

150 watts on tweets seems excessive Passive is more economical

👍👍

#BOSSMAN 🔊🔊🔊🔊🤝🏾

Send that CT my way 😉