SIYI HM30 Connection Test（Herelink & Cube Orange+ Mini）

Подписаться 1,4 тыс.

Просмотров 6 тыс.

50% 1

The function of herelink is to output sbus signal to HM30, and PC obtains mavlink data through USB cable.
SIYI HM30 is a remote full HD FPV system with remote control, telemetry and built-in OSD capabilities.
Know about World Drone Market from:
Official Website : www.worldronem...
Facebook : / worldronemarket
SIYI HM30 Long Range Full HD 1080p Video Transmission FPV System | Data Telemetry 30KM For Drone ：www.worldronem...
Features：
HM30 uses the 5100 to 5825 MHz band, centered on the 5550 MHz band.
HM30 antenna is interchangeable. Both the ground unit and the air unit use SMA connectors to mount the antennas.
Original antenna are: 4 × Omni Antennas (2 for ground, 2 for air), 2 × Directional Antennas (for ground) Sold-alone antenna choices are: 17dB high gain antenna / Lollipop antenna.
The transmitting power of HM30 is about 25dBm / 320mW.
Effective range: The latest record is 50km. The range limit is different at different antenna settings and different wireless modes.
HM30 is compatible with all types of flight controllers (to use OSD overlay, flight controller should support Mavlink output), such as Ardupilot, PX4, INAV, etc. If OSD overlay is not required, then any flight controller is compatible.
HM30 is compatible with any type of remote controller that supports S.Bus or PPM output.

Опубликовано:

1 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 14

@Aerofpvtv 3 месяца назад

One question, it connect Radio control to them and send signal for controls too? Or use the TX from Radio to send signal to the plane? I am building a fpv plane.

@srinandan6047 Год назад

Hi. I want to use the herelink Air unit in my drone but the thing is I don't want the transmitter. I have already my own transmitter to control the drone. I just need the live video feed to come into QGC on my laptop. Can i do this? If yes, how to implement this? I am using px4 firmware and CUAV V6x pixhawk as my FC.

@worldronemarket Год назад

Hello， No, the herelink airunit can only be matched with the remote control.

@srinandan6047 Год назад

How about in QGC? Can this be done with QGC and PX4 firmware? @@worldronemarket

@ashishkumarv Год назад

I am unable to connect using UDP or Bluetooth, Please help

@worldronemarket Год назад

Hello， How to connect, mobile phone or PC connection?

@mushcoat5795 7 месяцев назад

Hello! What purpose does the herelink connected to the HM30 via SBUS serve here? The Herelink Air Unit should be on board the drone, together with the Cube Orange+ and the HM30 Air Unit, right?

@worldronemarket 7 месяцев назад

Hello sir Cube Orange+ and HM30 aerial unit installed on drone for air terminal Herelink+HM30 is the ground end mainly responsible for signal transmission and control If you still have any questions, you can send us an email and I can help you solve the problem better.tech@worldronemarket.com

@mushcoat5795 7 месяцев назад

Hello and thank you for your reply! In the video you connect the HM30 ground unit to the herelink air unit, which is why I'm confused. Shouldn't the herelink connected by sbus to the HM30 be onboard the aerial unit? Thank you again!

@worldronemarket 7 месяцев назад

@@mushcoat5795 If you are using the MK15 remote control, you also use the MK15 air unit to connect to the HM30 through Sbus, because you want to transmit to the HM30 air unit through the HM30, which can make the transmission distance longer. There is also a video of connecting MK15 to HM30. You can also refer to it. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ibzWr6lnIpA.html

@joshielexable Год назад

Is there a usb connection to the transmitter?

@worldronemarket Год назад

Hello， The ground transmitter is connected to the PC via usb. SIYI HM30 ground end supports WiFi/USB/LAN port connection and communication.

@korayerdemir758 Год назад

can i also use UART to remote control the drone?

@worldronemarket Год назад

Hello， If you have the ability to develop, you can develop a ground station to obtain the mavlink message of the flight controller and control the drone.