Slamming My High Mileage Audi Using Software Only! (VCDS) 

Great work Memphis you've got yourself a really good car there. These videos really help with the lockdown thank you from England!

Looks great man. Yeah new wheels would be cool and when needed with spacers. In my opinion, it would be cool to paint those plastic parts in body color. And I'm also from Belgium 😃

Love the 4F. Owned a A6 for 6 years on KW suspension. If I knew how easy it was to lower I would have bought one with stock air. It was indeed easy to lower this model with VCDS. Have Fun with this car. Groeten uit Oost Vlaanderen!👍💪

I have an 2009 A6 4F Avant 2,7 TDI quattro since 5 years. Love my car. I like your Videos very much! Keep up the good work!

The 402 mod!! I did the same thing on my c5 allroad 2.7t(same engine as a b5 s4!) out here in the states. As im sure you already know, the lowest setting will ride a bit bumpier, so when friends/family get in the car i usually bump it up to the 2nd level ride height. Enjoy the car!

Always fun to see a new video from your channel :)

new vid made my day better, keep up the good work ;)

That is wicked, my previous neighbour had a 2000 Merc S500 which would sit itself on the ground every time it was parked. Love the factory air suspension in luxury euro cars

Great work bro! I enjoy watching each of your videos!

Lovely episode, keep up the amazing content! 👊

Awesome work done, keep it up, love watching your videos :)

Good job ! A great car. I have the same model, but with a petrol operating engine instead of diesel. Good choice.

Brilliant video Memphis love your channel stay safe 🇬🇧🇬🇧

So... You've got an Allroad, the raised version of A6 and then lowered it... okaaaay....... ;)

Hey Memphis, i really enjoy your videos, every single one of them! You and your videos mide be the reason why i think about getting a Golf 1 again or VW T3 :) the Audi is also nice and in my oppionen a perfect choice for your needs ! Keep going, great job till now ;)

Thumps my friend, I enjoy all of your videos. I have also learned a lot, thank you. Keep on bringing the good stuff 👍 cheers

I enjoyed this thx. Looks like some new dampers are in order too!

Hey Memphis, i really enjoy your videos, every single one of them!

Dees was eig echt interessanter dan ik had verwacht haha! Kwaliteit zoals usual

Really love your channel mate ! Learned a lot !

Hello, I'm from Brazil Watch your videos I think very cool. It's a lot of fun too. That's good work.

Great cars and so under rated. One new sub from the Uk😎👍

Happy to see you, hop your well.

Love your new car! We had the same, you guesed it, in germany. It was a 3.0 TFSI though, but it was lovely to drive it on the Autobahn, especially goingt to Austria for skiing. You really have to watch out for the air compressor, we had the same issues and it hat to be replaced, eventually my dad sold it.

Great work. With vcds you can activate parking sensors visual on the mmi. Needle sweap, high beam auto it changes back to low beam when cars come, and digital speedo and turbo boost visual in the cluster.

I always preferred the stance of the S6 to that of the Allroad. Your computer wizardry has improved the look no end. Great job Memphis. Am I the only one who likes the original alloys? 👍

Dude I just love your videos!

Très intéressant la suspension par airbag ! Je ne connaissais pas cette technologie, merci.

excellent video as usual. The audi is looking nice

New subscriber here.. sorry, didn’t know your channel existed. Glad I found it, albeit by accident but the content of the videos is great especially when you worked on the Audi 100. Great to see your new workshop is almost complete too.. it’s looking fab 👍

Great video, thanks and keep up with the good work.

What a car!! Great video 🙌

Awesome video kiddo! Great job 👍🏼

mooie daily en leuke content 🤙 subscribed

beste blij te zien dat je vcds hebt leren kennen. ik heb zelf een audi tt en altijd al fan geweest van vw en audi. ik wil deze zomer naar de nurenbergring dus als julie dit jaar terug gaan. wil ik zeker mee.

Liking your channel pal. Good stuff 👌

Great video man!

I have the exact same car, really Good car. Love it!

Pure gold! Good job :)

Excellent work!

Wederom weer een mooi filmpje met een nette uitleg welkom BELGIE

Looks really good I would recommend a straight pipe😂 these engines sound amazing

Probeer is iets vaker te uploaden. Je doet Geniaal werk, alleen upload wat vaker omdat ik niet kan wachten op de volgende aflevering. Ik raad je aan om die A6 Allroad helemaal zwart te maken. Dat ziet er gruwelijk uit, heb zelf er meerdere keren 1 gezien. Ik raad je dan wel aan, om getinte ramen te hebben ziet er heel dik uit. Goed werk!

Great work! Greetings from Denmark

17:08 i agree, BUT since anyone can bag their car at this point you can get the best of both worlds easily. want performance? pull her up? want a clean, lowered car? down she goes

Thank you for the kind words. I would like to point out that there are some functions that the factory scan tool does that VCDS can not perform. In a nutshell, the factory scan tools at VW, Audi, Seat and Skoda dealers call home to special servers to get data that is used for things like firmware updates, or security type functions (key matching for example). As you might guess, Ross-Tech customers will not have access to said servers, thus not be able to perform those type functions. Regards.

Interesting video, Memphis. Speaking as an old fart, I prefer stock height. Considering the state of the roads here, stock height and smaller wheels/taller tires would be an absolute must. Lowered, it would never make it into and out of my driveway. A few years back the expressway between where I live and where my mother lives suffered pavement failure. The carriageway had been resurfaced and the new surface did not bond properly. For a week every time I drove through the area there would be 5 or 6 cars on the shoulder awaiting recovery with at least two flat tires. Talking to one of the recovery drives I found out that many not only ruined the two tires but had also bent or broken the alloy wheels.

Excelente, saludos de Argentina

Buen trabajo y video 👋🏼

Fantastic video, greetings from the U.K.

Looks dope!

Lijkt wel Citroen zoals je auto omhoog komt ! Leuke leerzame video en alles duidelijk uitgelegd ! groeten uit Breda .

Damn, looks so good ! 👌

Being me- i'd have tried to patch it with a motorcycle patch xD

Thanks for the knowledge..

With VCDS you can enable things like Fog lights as cornering lights, control windows with remote, oil temp in MMI, needle sweep, coming home/leaving home lights.

Congrats !!

Nice one! Subscribed!

Intressant filmpje👍👌

Nice video. But be careful, it is bad for your suspension bags to inflate of deflate to the maximum. It is also bad for the suspension arms, especially silenblocs. But I have to agree it looks nice. I do have lowered all my cars but it always cost me a lot of money to replace the broken parts while lowered

Good job!

Lekker man bro

That reminds me of my w124 surprising me 2 years ago. My car was parked in front of my house and i saw it sitting low as a lizard. Left spring perch was badly rusted and ripped off. That's why it was soo low. I welded it back to its place and painted it afterwards.

I don't know but I think that OBDwarenhuis should offer a VCDS kit to you... Great video!

Great vid! Thanks for the tutorial, mine need doing and this has really helped. Out of interest, what size alloys are you running? Thanks again 👍🏻

I Keep coming back to this video😂Thanks a lot was able to calibrate my car was 1 cm of and that seemd to cause my yellow light to flash and i got a Code for mecanical error on sensor. But seems to be fine now 😎

best video! also explains how it set up height. Thanks. we all have VCDS but cannot find codes for every system, i have no manual.

to be honest. If i just looked at that car, I wouldn't have thought it was a high mileage :/ But that just means the car was taken after up until the end by the old owner/your dad :) It might be some expensive work that has to be done, but to be fair if the old parts lasted that long, the new parts should last just a long :O so it's worth doing in my opinion, keep going :)

Hoi goed werk zeg ik heb een t6 nou ik ga ook vcda aanschaffen. Dank je El voor deze video. Gr 👌👍

Awesome bro!! You can also use some spacers.

Cool stuff mate , I think all roads go lower than my d4 a8 this thing will only go down by 17mm with vcds. I ran lowering links on my previous d3 a8 so I’m gonna get some for this one too.

Hey Memphis. Your video brought me to the idea that this testing device would be very helpful when I´ll be buying a car. I´m looking for a 2003 Allroad C5, the previous version. Do you think I´ll be able to use it? Thanks, love what you do

Verschil in rijhoogte kan ook komen doordat in het verleden bij bandenwissels of herstellingen de wagen niet in service-hoogte(of gewoon hoogste stand) zetten bij de herstelling. Propere wagen voor de aantal km👌. Blijf zo verder doen!

Hele mooie wagen 😃 ... wat koste de inschrijving taxs als ik mag vragen? Ben ook aan het overwegen om deze aan te schaffen 😃 maar ben benieuwd wat het me zou kosten betreft taxsen..

Goed gedaan 👍🏻

Не знаю почему я смотрю его не понимая, но мне чертовски это интересно!)))

Coole video! nu wil ik ook zo'n allroad gaan aanschaffen haha ;-)

uitstekend, VCDS is mijn beste aankoop geweest

Nice e28 in the background. Wish we got all the cool euro bits from the factory here in the states.

buenos dias, me gustaria saber como llegaste a bajar al minimo la suspension, gracias por tu tiempo y tus videos

Hey mate! Is there an option to have the lowest height (at the end of the video) programmed to one of the driving modes? So there would be a "normal" to comfort mode, a "slightly dropped" for dynamic, and a "show (0bar)" mode for example to efficieny mode.

Great content if you post more often your channel will blow up

Damn nice m8. Will you straight pipe it in the future?

Ah yes, this reminds me of lowering the rear of my BMW E39 540i wagon using INPA, which is fairly similar to VCDS, just a little less user-friendly.

Nice video!!

I am curious can you use the vcds to lower headlights, my mercedes has automatic headlight positioning and its always looking too much down, Great vid by the way

Great video. When you washed the fender liners I was so satisfied lol. I’ll keep supporting so you can keep paying the road tax on this beast. Is it an idea to wrap the plastic trim in the body color of the car?

This is a big step for you, congrats! But do you know that start and a few minutes later turn off is bad for the engine? Or do you cut those minutes off the video?

Hello. On what driving mode (dynamic, automatic, comfort, allroad or lift) your car was set, before you start this procedure?

That's a nice car!

Damg that thing sounds sick

Brilliant video, does anyone know what size tool to remove the bolt securing the airbags? Thanks Mike

Hey I couldn’t help but notice your rear brake line have cracks in the rubber layer after the crimped fitting going to the caliper ;) cheers and great videos my friend

Hello, first of all, that Audi looks great, I want to change from 245/40/R18 to 225/40/R20. rub against the wheel arch. thank you

Impressive !

SWEET !!!!

Greetings form Latvia ,just pop up in recomendations in youtube. You need to straight pipe it ,V6 have a good sound.

Great video. Although Im not sure the lowered look suits the A6.

Nice tool vcds!

Nice!