No video :(

Slicing Plastics and Polymers with the Accu-Slice Band Saw Accessory (15)

Подписаться 6 тыс.

Просмотров 3,4 тыс.

50% 1

Cutting and slicing various plastics and plastic polymers with the Accu-Slice Band saw accessory to evaluate the finished cuts on the band saw. Slicing, acrylic, polypropylene, nylon, PVC, UHMW, Delrin, and Polycarbonate. All of the plastics produced boards that were flat and perfectly parallel on all sides. Some of the plastics cut better than others. Acrylic plastics were able to be cut for use in woodworking applications such as fillers. Various band saw blades were evaluated to determine what would work best in cutting plastics on a band saw without any lubricant.

Опубликовано:

6 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 7

@docslaughter5422 6 лет назад

Dear sir, thanks for the video. In the past I cut numerous pieces of acrylic for jewelry displays and museum mountings. Placing a strip of clear packing tape on top of the acrylic and cutting thru the tape will lubricate the blade without any castoff of lubricant. The packing tape has a release agent applied to the shiny side to facilitate unspooling of the tape. I was then able to draw directly on the tape to show cut-lines and part layout lines without harm to the plastics. Thanks again for the demo.

@cwhussey5432 7 лет назад

Most excellent, thank you Sir. what I see it can be done for Celtic Knot designs since the narrow portion of the material that is not touched by the blade are what is visible. Beside when it is cut done on a lathe and sanded it will work out fine.

@glavmex 5 лет назад

Good day. What is the name of the band saw model. How many cutting speed meters / second. What are the characteristics of the tape itself and the model. Why the shelf was not made below because you can lower the guide unit saw blade.

@dicktingeler72 Год назад

Well done! o7

@garrybrpwine3073 7 лет назад

Hope you wear a M95 mask.. some of those plastic are very caustic when breathed in.. need a skip tooth on some of those materials

@Accu-Slice 7 лет назад

I always wear and recommend wearing a dusk mask when cutting plastics and even woods.. In fact I usually wear a respirator when cutting and sanding any wood or plastic products since I have developed an alergy to some of the resinious wods.

@garrybrpwine3073 7 лет назад

The plastics are even worst than the wood... worked in commercial manufacturing of plastics for about 7 years..