Slim's DIY Log Bench (and Couch too!) Recycle Project 

I needed two things at the cabin: A weather resistant bench for the deck, as well as a comfortable couch for indoors. Why not have both? I show you how I made it from scrap wood using no nails or screws, and how I got to use something from my old Aliner camper as well!
Suggested Tools:
Mitre Saw (or hand saw)
Machete (Axe or Draw knife also works for removing bark)
Hammer and Chisel
Reciprocating Saw for knots (or hand saw)
Tenon Cutter (1" or 1/2" preferred)
Power Drill for 1/2" shank
Forstener Bit (same size as tenon, one size down for soft wood)
Flush Cut Saw for pegs
Mallot
Sandpaper and/or Sander (80 grit and 120 grit)
Wood Glue
Polyurethane
Paint Brush
DISCLAIMER: Proper and safe use of tools is essential. Do not attempt if you are not efficient in their use.
Products Featured this video (Amazon Affiliate Links*)
Log Furniture Tool Kit: amzn.to/45HQHuq
Music Credit: One Time - Jeremy Black
Visit My RU-vid Channel for all my videos!
/ slimpotatohead
Website: www.slimpotatohead.com
My Equipment (Amazon Affiliate Links*):
MacBook Pro Laptop: amzn.to/3Is5QWS
PowerDirector 365 Editing Software: amzn.to/3JYeqOB
GoPro 10: amzn.to/3QVAMRq
Camcorder: Sony FRD-AX53: amzn.to/3A3xHrD
DSLR Camera: Sony A7Sii: amzn.to/2J9voXk
Favorite Lens: Samyang 24mm F1.8 for Sony: amzn.to/3LCRGF3
Shure LensHopper Mic: amzn.to/3n0ic0C
Zoom Field Recorder: amzn.to/2WrLZQU
Tripod: amzn.to/2X0Vk0P
MPPT Controller: amzn.to/2LHgM5t
Old Town Kayak: amzn.to/3werPKZ
How I get around:
Tow Vehicle: 2010 Jeep Liberty, 6 cyl 3.7L gas engine, 4WD, over 261,000 km
* Amazon Affiliate Links provide me with a very small percentage of the sale with no additional cost to the buyer. Please support Slim Potatohead by using my links for any Amazon purchase. Thanks!