@@scooter0241 I don't know. I can find out. If there is really a need for it, I can probably talk my boss into making it. I did just get the ok to make a PDW stock for the AR15 platform.
Mayhaps you would like to see my 72-150 Mukwa express video and cartridge progression. It's a custom brass 12ga brass case loading the same a straight walled cartridge. I'm loading it as a pure black powder application. Mountain man
Also curious about this. I've read some people fill the void with jb weld. My 4 inch model leaves the burns on the cylinder too. Though it doesn't seem to be doing too much damage to the bluing after 1200 rounds of full power 357. It's still unsightly.
Mayhaps you would like to see my 72-150 Mukwa express video and cartridge progression. It's a custom brass 12ga brass case loading the same a straight walled cartridge. I'm loading it as a pure black powder application. Mountain man
Blast from the past How about going ( Back To The 44 ) Something I Renaissance in hand loader magazine. Look up 44 Special pet loads +p This is an article I came across when I was looking for loads to shoot a 300g hard cast out of a 44 special They have load data for 44 special 22000 and 25000 P.S.I. loads shooting bullets from 180g to 307g I have a Browning / Winchester 92 44 mag, but if I try to load a 300g W.N.F.P into a 44 mag cartridge, it is too long to feed in my 92 but if I load it in a 44 special they are the same Overall length as a 44 standard 240g magnum and they feed reliability. The load pushes a 305g hard cast bullet at a little over 1000 F.P.S. if you Google it, you will see it, and the load data . Ps I only shoot these in my 44 mag firearms
In the last 30 days, I grabbed the Svarog Italian, Zveroboy, and Monolith (Diablo) slug molds from eBay. New in box with 2 pins each, except the Monolith, which came with 4 pins. I also snagged the Botfly mold about 3 months ago.
Another option is the "Thug Slug" available at Ballistic products. It is a keyed wad slug (Both included) and I got decent accuracy with them out to 50 yards. It's not a mold but they are slugs that are available.
I also want to thank you for all the information you put out. It's really helpful! I'm looking for load data for 45/70 powder coated bullets, 300 and 405 MP molds. I can't find any! Can I use plated data? Jacketed? Help!
I've been reloading a long time. Some years back I started loading 690 ball per Ballistic Products data with a fold crimp in Rio hulls. I was really concerned about a completely inverted fold crimp but BP said they'd been using it many years. It works fine, and if the fold isn't uniform I just put the shell in the wad seating station and give a nudge to make it look right with the Lee Load All. Fun range load up close, going to try with a scoped gun and rifled choke tube. Hope to get a fully rifled gun too. Have you had any sign of shearing wad petals?
the Lee .575 Minie mould might work for him ? I used them loaded to 600 ft per second for busting crows nests and Squirrel Drays very successfully through a true cylinder choke barrel. Pretty accurate to 25 yards too. Best Wishes. Bob. in Wales. 👍
The TL356-95-RF has a plain base, the TL-358-158-SWC has a bevel base an the CTL312-160-2R is disigned with a gascheck shank. These are the 3 TL bullet molds that I own. Specify wich design you're interested in and maybe somebody might help you out with the desired information.