Тёмный

Small Workshop Game Changer! DIY 3-in-1 Saw Horse and Outfeed Support System 

Woodshop Junkies
Подписаться 258 тыс.
Просмотров 271 тыс.
50% 1

To truly get the most out of my single garage workshop I need to design all my projects to be multi-functional and as compact as possible.
I needed outfeed support for my table saw so I designed a 3-in-1 saw horse and outfeed system that can fold away and be stored when it isn't being used. A Super Space Saver and a very useful addition to my small workshop.
Check out the hardware I used:
amzn.to/47oQoEY
Ultimate Tool Storage For Small Workshops - Plans!
thewoodworkersplans.com/produ...
Ultimate Tool Storage - Video!
• Ultimate DIY Tool Stor...
To support my channel visit one of our merch stores:
USA - teespring.com/stores/woodshop...
EU - teespring.com/stores/woodshop...
Or follow my projects on social media:
Facebook: / woodworkjunkiesite
Instagram: / woodworkjunkie
Check Out My Gear (Affiliate):
USA - www.amazon.com/shop/woodshopj...
UK - www.amazon.co.uk/shop/woodsho...
Some product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support.
Disclaimer.
All of the videos on this channel are intended for entertainment purposes only.
Should you choose to make or do anything as depicted on this channel you would do so at your own risk.
Woodworking and the use of power tools can be extremely dangerous.
The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct.
Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer.
Always use protective gear where applicable and never attempt something you are not comfortable doing.
Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do.
Please, stay safe and work smart.

Хобби

Опубликовано:

 

11 ноя 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 402   
@WoodshopJunkies
@WoodshopJunkies 6 месяцев назад
Get the plans! thewoodworkersplans.com/product/universal-outfeed-support-practical-diy-woodworking-plans/
@lyletimms9891
@lyletimms9891 6 месяцев назад
19:57
@robinthomas4086
@robinthomas4086 5 месяцев назад
I had an improvement idea for this project. If there was incremental marks added to the adjustable portion. It would make it quicker to height level for each of its task. Great project BTW👍👍
@Reviews-Tidbits
@Reviews-Tidbits 5 месяцев назад
The plans don’t include a comprehensive cut list. Money wasted.
@golfer571231
@golfer571231 4 месяца назад
I bought the plans but i have not got a link for them yet.
@carvideos3948
@carvideos3948 4 месяца назад
​@golfer571231 same here too!!
@Boddini
@Boddini 6 месяцев назад
looks nice! i like it! one thing to make it more efficent would be to do a mark on the alternating hight, one mark for the band saw hight and one for the drill press hight etc. so you dont have to dial that in every time :)
@madameblueberry2608
@madameblueberry2608 6 месяцев назад
I was thinking the same thing.
@Ethan_Swain
@Ethan_Swain 6 месяцев назад
I was thinking about drilling some holes on the slides at common heights. That way you could just put some pins in the holes and not measure.
@Boddini
@Boddini 6 месяцев назад
smart! @@Ethan_Swain
@davearonow65
@davearonow65 6 месяцев назад
This is the exact reason I have made ALL of the working surfaces for all of my machines in my shop the same height including my workbench so I never need to keep adjusting my infeed and putfeed supports which I use constantly because I make entry doors and am always working with large pieces of lumber.
@stuartkorte1642
@stuartkorte1642 6 месяцев назад
Pegs would also help with accidental drops if knobs come loose.
@jaytea23
@jaytea23 3 месяца назад
This might be the BEST workshop project I’ve ever come across
@paulmccullough7352
@paulmccullough7352 6 месяцев назад
Just like many others, i would have gone with "Ball Rollers" instead of castors, it would give you a more stable surface while still giving you multidirectional travel. My other suggestion would be to make some visible makings for the most common heights you would use. It would make it quicker and easier to setup e.g. table-saw, miter-saw, drill-press, work surface, saw-horse etc..
@MikiaoD
@MikiaoD 5 месяцев назад
Instead of marks, you could cut out a spacer you can put underneath the lifting section. Lift up, set on spacer, tighten down. Keep a spacer for each tool/setting you need. I think it'd make it easier to set up than trying to match the marks.
@jeffmathis2298
@jeffmathis2298 5 месяцев назад
@@MikiaoD with the exception of the bench grinder, every "work" platform in my shop sits at the same height. No need for multiple settings. I'll build this, as is, because it will work as an adjustable work table in the field.
@anewman513
@anewman513 6 месяцев назад
It would be amazing if you could walk us through the concept and design phases of one of these projects. You create very cool and useful projects and the creativity behind them is mind-blowing. I'd love to see this part of the process.
@kgomocolosaba6843
@kgomocolosaba6843 6 месяцев назад
I agree, very creative indeed
@MattWeber
@MattWeber 4 месяца назад
Hardest part there is that would be a 10 hour video to really explain even at surface level. For something like this for example, your looking at all the possible ways to build EACH function, then need to pro con each of them, see what is possible with fabrication, what isn't.. what possibly may interfere with the other features, what is economical, what is obtainable for supplies in a timely manner, etc. The hardest part becomes not giving yourself analysis paralysis at literally every step of the design process.
@mattkonrad511
@mattkonrad511 3 месяца назад
The book provides clear illustrations ru-vid.comUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO diagrams that cover many of the essential topics. The projects at the end of the book are valuable for enhancing your skills and creating your own furniture. A digital platform linked to the book that could offer the plans for other woodworking projects with the cut sheets would have been a nice addition, but overall, the book is excellent.
@2200chuck
@2200chuck Месяц назад
This is going to be my next build. But I’m making 2 changes and one addition. Change 1: Instead of caster wheels at the top, which have to swivel to line up with the material rolling across its surface, I’m going to use 1-inch roller ball bearings which are universal in whatever rolls across it in any direction. Change 2: Instead of putting the casters on the bottom in a fixed extended position, I’m going to design some kind of extendable - “latchable"- roller system, again with the roller ball bearings, so that it can roll around (like your casters do), but actually latched down, but when retracted the frame sits solidly on the ground for better stability. I’m still working out the design details but it’s based on what you did with the drill press. I need to make this change to accommodate the next item; the addition. The addition: I’m going to make a table top that will fit snugly over the 2 ends so that when extended and latched, I can put the table top on it and then I will then have a fully functional assembly table. When not in use the table-top can be stored up against the wall behind the mobile workstations you’re building; like your drill press and table saw. The narrow side is short enough that it won’t interfere with the French Cleat system you’ve built; it will lean against the wall just below the lowest cleat. Here’s an Amazon link (US) to show you the Roller Ball Bearings. tinyurl.com/mvjk3xbm. Let me know what you think of these 3 ideas. Cheers Chuck
@TheWeekendWoodshop
@TheWeekendWoodshop 6 месяцев назад
Now THAT is a great build. Excellent use of space, multi-functional, and simple in its design. Well done!
@gm2407
@gm2407 Месяц назад
Do a second one and install rail clamps as a vise. You will have pretty much a large bench for working on site or at the shop whenever you need to do something big. Great build.
@jamescracknell4283
@jamescracknell4283 6 месяцев назад
Very good video Jean as always. Just a suggestion for the top, instead of casters you could use nylon roller bearings that go in any direction and are very inexpensive ☺️
@oldguy1030
@oldguy1030 6 месяцев назад
Your idea is right. But I prefer to get the steel roller bearings because I find the nylon ones tend to collect sawdust and such more than the steel.
@jamescracknell4283
@jamescracknell4283 6 месяцев назад
@@oldguy1030 you are right of course, just meant more on the cost side of things
@garrisonaw
@garrisonaw 6 месяцев назад
@@oldguy1030 agreed. You’ll need to frequently blow the dust out of any kind of roller bearings (which might turn out to be a major downside compared with the wheels), but the nylon bearings will attract sawdust like a magnet (whereas the steel bearings will only attract metal shavings like a magnet).
@kaliebgriffiths9800
@kaliebgriffiths9800 6 месяцев назад
When are you guys shipping 😊
@ericrickert3045
@ericrickert3045 5 месяцев назад
You really do all the heavy lifting in the thinking department for shop projects! This is amazing!
@steveriese8338
@steveriese8338 6 месяцев назад
Over-engineered? Never! That's where the real enjoyment is. Well done!
@funkypunkypine
@funkypunkypine 6 месяцев назад
Um, do I want plans? Yes, yes I do! (I am SO damned glad there are smart people out there that can create plans that I can then follow :)
@patrickguillot3894
@patrickguillot3894 10 дней назад
It’s very clever … as usual ! Bravo !
@Mike_Gray68
@Mike_Gray68 4 месяца назад
I was thinking instead of the casters on top, how about using some UHMW (Ultra-high-molecular-weight) plastic. Then you can take the covers and have them open to the inside. Those will have the plastic on them too. But they are not level with the top but slope up to act as a ramp so if you material is bowing down coming off the table saw, it will act as a ramp to lift it up and not get caught. That is what I am going to use when I make my set.
@edwardgallegos519
@edwardgallegos519 6 месяцев назад
That is so awesome! Great design!
@Chsbobcat1
@Chsbobcat1 6 месяцев назад
This is incredible!
@urs-id9yi
@urs-id9yi 6 месяцев назад
Love your design and multi purpose table. I also have a one car garage shop and like you, must take care when adding to the space. Your table checks all the boxes!
@Sebastopolmark
@Sebastopolmark 6 месяцев назад
VERY well designed! !! !!!
@MrWoodykeys
@MrWoodykeys 6 месяцев назад
Bloody brilliant.
@keithryant5779
@keithryant5779 4 месяца назад
Looks FANTASTIC to me!
@bobbyfoutz6147
@bobbyfoutz6147 5 месяцев назад
Excellent idea!!!
@user-qg6fy4yp8t
@user-qg6fy4yp8t 6 месяцев назад
Brilliant idea!!!
@roncooney8526
@roncooney8526 6 месяцев назад
Awesome idea.
@TomasFaalPetersson
@TomasFaalPetersson 6 месяцев назад
Looks great
@richardpencak6800
@richardpencak6800 6 месяцев назад
That’s kick ass!!! Great job!!!
@randybecker7339
@randybecker7339 6 месяцев назад
Quite simply ingenious!
@brianreber8842
@brianreber8842 6 месяцев назад
Great job!!
@captbill279
@captbill279 Месяц назад
Really cool. Lots of functionality in a small box. There has to be an easy way to mount the locks on the inside of the frame instead of the outside then it would be the ultimate easy storing setup.
@jameslarson6555
@jameslarson6555 6 месяцев назад
Very clever!
@robsteinhaur221
@robsteinhaur221 6 месяцев назад
Brilliant, great job!
@mrspies1022
@mrspies1022 6 месяцев назад
Great idea. Awesome plan
@alancollett5566
@alancollett5566 5 месяцев назад
Awesome idea!
@douglamp178
@douglamp178 6 месяцев назад
Outstanding, I love it.
@pataulson
@pataulson 5 месяцев назад
Brilliant!
@70redcutlass
@70redcutlass 6 месяцев назад
This is slick. Very cool.
@stuartkorte1642
@stuartkorte1642 6 месяцев назад
Another great idea. Looks very useful
@andychavez
@andychavez 6 месяцев назад
That is amazing.
@DanielBalmer-bp6mh
@DanielBalmer-bp6mh 6 дней назад
Have you considered Roller Ball Transfer Bearings instead of caster wheels? They have a smoother glide, more durable, cheaper, and can handle more weight. Thanks for the great plans and instructions!
@oldguy1030
@oldguy1030 6 месяцев назад
That really is a neat design!
@jhans3278
@jhans3278 6 месяцев назад
Slick! Thanks for the video.
@laddcraner4170
@laddcraner4170 4 месяца назад
Great build.
@Trapper_Creek_2024
@Trapper_Creek_2024 5 месяцев назад
Yes, plans would be fantastic! This is a slick addition to any shop, and should serve you well for a long time to come. Thanks for sharing!
@rajrooplal7595
@rajrooplal7595 6 месяцев назад
Yes, great idea. Love it
@theredtruckwoodshop2722
@theredtruckwoodshop2722 4 месяца назад
WOW! Very smart. Thanks for sharing.
@kevinbowker2385
@kevinbowker2385 6 месяцев назад
Very slick! Thank you for sharing!
@lkjsdf1
@lkjsdf1 6 месяцев назад
I love it! The sheer inventiveness on this channel is outstanding 👏
@FHGWoodworking
@FHGWoodworking 6 месяцев назад
Lots of thought gone into this one, great job!
@madmax5579
@madmax5579 6 месяцев назад
What a beautiful job as always you’re doing something very useful everytime
@scottrmc59
@scottrmc59 5 месяцев назад
Well done
@cybermanne
@cybermanne 6 месяцев назад
Looks really handy.
@donnyferris5521
@donnyferris5521 6 месяцев назад
Nice job! Great fixture for a small shop!
@krisbennett9852
@krisbennett9852 6 месяцев назад
I love this and when I have the time to make myself I'll definitely get the plans. Thanks and keep up the great work
@rcrogers6
@rcrogers6 5 месяцев назад
Brilliant.
@TJWorksWood
@TJWorksWood 6 месяцев назад
I dig it! I like the versatility of this build!
@robfreddi2712
@robfreddi2712 3 месяца назад
Great idea well done.
@user-lm9gi9gu9g
@user-lm9gi9gu9g 4 месяца назад
Great idea so versatile👍
@brianredfern5228
@brianredfern5228 4 месяца назад
Great project, very clever!
@dropzoneguns2597
@dropzoneguns2597 6 месяцев назад
Brilliant
@flboy77
@flboy77 6 месяцев назад
Very clever. I like that a lot.
@RoyBlumenthal
@RoyBlumenthal 6 месяцев назад
That's excellent!
@Xhilong
@Xhilong 3 месяца назад
I love simple ideas that just work. Great Job
@usiebertz
@usiebertz 4 месяца назад
What a great idea! Thanks for this video.
@nzlemming
@nzlemming 6 месяцев назад
Nice project. Simple and functional.
@kenderman1
@kenderman1 6 месяцев назад
I love this. It's fantastic! Such a great idea.... thank you for sharing
@johnmcauley7158
@johnmcauley7158 5 месяцев назад
Just brilliant
@annhan7542
@annhan7542 6 месяцев назад
Very creative
@charlesstanley8196
@charlesstanley8196 6 месяцев назад
I will be building one of these. Thanks for the plans.
@stevevogt866
@stevevogt866 6 месяцев назад
Quite smart!! Thank you for the idea. LOVE IT!!
@bigpetebipolar
@bigpetebipolar 6 месяцев назад
Great design and functions! I would love the plans for this. It's just what I need for my small shop.
@tonyseeley
@tonyseeley 6 месяцев назад
Simple but super clever, great job.
@tagiti
@tagiti 6 месяцев назад
clever, nice project
@geraldadams6267
@geraldadams6267 5 месяцев назад
Well done and fairly simple - nice
@AmericansWillRise
@AmericansWillRise 6 месяцев назад
You never cease to amaze, my man!
@MakewithMatt
@MakewithMatt 5 месяцев назад
Very creative and effective! I love the simple design and how it folds down to such a compact footprint. Another great addition to your workshop, looking forward to more as usual. Cheers
@gaz740
@gaz740 5 месяцев назад
Great video Jean. Exactly what I need for my small shop
@mandyleeson1
@mandyleeson1 6 месяцев назад
Great idea Jean, and I really like that you can move around in your workshop now.
@cindyharrison4191
@cindyharrison4191 6 месяцев назад
Brilliant 🎉😊
@yvescouturier2801
@yvescouturier2801 6 месяцев назад
Smart and efficient... BRAVO MAN !
@harperparks9056
@harperparks9056 4 месяца назад
Crazy cool! You’re as awesome of an inventor as you are a woodworker.
@byronglass882
@byronglass882 6 месяцев назад
I need this, great design.
@KleingartenProjekte
@KleingartenProjekte 6 месяцев назад
This one will be build, such a great addition for only a little bit of space. Great Work!
@benbrown1487
@benbrown1487 6 месяцев назад
Some of my favourite projects are the ones born out of necessity. This one is brilliant and I’ll be building one very soon! Keep the great content coming Jean!!
@stephandelange1776
@stephandelange1776 6 месяцев назад
Very good ideas as usual. Simple, small, very portable, and especially FONCTIONAL. Congratz.
@jeditsuyoshi
@jeditsuyoshi 5 месяцев назад
Clever. Well done, well made.
@sandrajacobson917
@sandrajacobson917 6 месяцев назад
Great design! I’m interested in plans to make one for myself.
@BenjaminFranklin-vx5xc
@BenjaminFranklin-vx5xc 3 месяца назад
Very clever. Simple but fantastically useful.
@SteveMonk1956
@SteveMonk1956 6 месяцев назад
Jean, Genius!
@apowell389
@apowell389 6 месяцев назад
That was very well done. Very good engineering
@randymartin2396
@randymartin2396 6 месяцев назад
Yes very smart build
@albertpeterson4652
@albertpeterson4652 Месяц назад
This is amazing.
@alukard2983
@alukard2983 3 месяца назад
good job and good stuf, thanks
@CodyBrandt580
@CodyBrandt580 6 месяцев назад
Very interesting design! Your creativity is very inspiring.
@stevesmith7164
@stevesmith7164 4 месяца назад
Looks like a functional piece of shop equipment 👍
@mikeseldomridge8052
@mikeseldomridge8052 3 месяца назад
Nice job
@Wk_thirteen
@Wk_thirteen 6 месяцев назад
Another amazing idea & build video. I will be making this soon as it will solve my current issues with my small space. Thanks, I’m pretty sure I’ll be buying the plans to make life easier & as a thank you for this great idea, cheers!
@raytbrown2
@raytbrown2 4 месяца назад
That's a really cool build!
@alonzohollingsworth7712
@alonzohollingsworth7712 6 месяцев назад
This is a MUST have for my shop. This is a blessing for sure as it serves the exact purposes you created it for. I just purchased the plans. Thank you so much😄👍
@ChristianAdamovich
@ChristianAdamovich 3 месяца назад
Nice job.
@tomztoyz
@tomztoyz 5 месяцев назад
Very creative.👍🏼
Далее
9 Cheap And Easy Shop Organizers - Super Simple HOW TO
29:36
RM 'Come back to me' Official MV
05:42
Просмотров 8 млн
BEST Adjustable Sawhorse with Interchangeable Tops
14:32
Top 3 amazingly simple ideas made of wood!
11:27
Просмотров 3,7 млн
No thanks Festool, I'll keep my $1,500
23:49
Просмотров 1 млн
Every beginner needs to hear this
11:10
Просмотров 1,2 млн
Traditional Work Horse - 374
24:29
Просмотров 757 тыс.
99% of Beginners Need These 5 Woodworking Jigs!
10:51
Просмотров 568 тыс.
Super Strong DIY Alternative - Space Saver On-The-Move
16:14
У кого круче наклейки?
0:49
Просмотров 5 млн
河东狮吼
0:13
Просмотров 10 млн
Распаковал Xiaomi SU7
0:59
Просмотров 2,5 млн
河东狮吼
0:13
Просмотров 10 млн