Тёмный

Smart PWM v2.2 DIY Box Mod Build 

Analog Box Mods
Подписаться 4,5 тыс.
Просмотров 23 тыс.
50% 1

Хобби

Опубликовано:

 

29 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 31   
@Charlie_12x3
@Charlie_12x3 5 лет назад
That’s a really well built box mod. I love all of your tutorial videos. Ill most likely be buying this kit today. Thanks for the wonderful explanations and time to help us understand better.
@Starkiller1981
@Starkiller1981 7 лет назад
Sweet I was just looking at rigging a switch for all the modes you have!
@ranaarslannasir6684
@ranaarslannasir6684 4 года назад
want to buy a complete box just like that and with the battery you can tell me what I have to do to buy it.
@R3loaded1313
@R3loaded1313 6 лет назад
Your build videos are second to absolutely none. What kind of soldering iron would you recommend. I had a 15 watt but it broke. The thing took forever to heat up
@AnalogboxmodsCanada
@AnalogboxmodsCanada 6 лет назад
Thanks man :). I'd recommend a soldering station more than a standalone iron, one with temp control is nice. Hopefully this will help, wiki.ezvid.com/best-soldering-stations .
@PHOENIX.39
@PHOENIX.39 6 лет назад
What soldering iron do you use and what kind of solder do you use?
@NoLaSoulja86
@NoLaSoulja86 6 лет назад
I'm looking to build a mod much like this but using a 3s or 4s lipo am I wrong in assuming that the wiring would be much the same minus the battery sled portion. Also would you mind doing a video on that and suggesting a kit or parts from me from your site
@AnalogboxmodsCanada
@AnalogboxmodsCanada 6 лет назад
If the PWM board supports 3/4s then yeah the wiring would be the same. It might be a while before I make a PWM lipo vid but the iPWM kit we sell has a lipo option.
@jad9544
@jad9544 6 лет назад
Very nice. Do you sell this as a kit or have all the parts on hour website?
@AnalogboxmodsCanada
@AnalogboxmodsCanada 6 лет назад
I don't have the SmartPWM boars any more, but I do have the Big Al's iPWM boars instead. I don't think I ever listed that 3D printed top cover but I can add it if you want...
@marine454bigblock
@marine454bigblock 7 лет назад
hi and thanx for the video ... what is the lowest ohm i can go no .. and not danger ...?? thanx again
@AnalogboxmodsCanada
@AnalogboxmodsCanada 7 лет назад
The board itself can handle ~40A (I think), you'll probably be limited by the batteries before the board and it also depends on how many batteries (in series) you use because, for the same output power(Watts), as you increase the voltage, you decrease the amp draw. Another thing to keep in mind with PWM is that it regulates the output voltage by rapidly switching on and off, the "width" in "pulse width modulation" is the length of time it's on, but for the time it is on, it's always on full, so assuming your batteries are rated for 30A, 2 cells/batteries (series): (3.7 * 2) = 7.4V 7.4V / 30A = ~0.25 Ohm Output = 222W 3 cells/batteries (series): (3.7 *3) = 11.1V 11.1V / 30A = 0.37 Ohm Output = 333W If you put pairs of parallel batteries in series you double the amp handling of each pair (60A) but then you'd run into the 40A limit of the board, 4 cells/batteries (2p2s): 7.4V 7.4V / 40A = ~0.16 Ohm Output: 296W All that being said, I wouldn't recommend pushing things to their absolute limits, with any series mod (noisy cricket, etc) people tend to build their coils at a higher resistance because with the higher voltage you don't need to build super low to to get big output (Watts).
@sodalines
@sodalines 7 лет назад
with 3 18650s do you get 12v max output? or 4
@AnalogboxmodsCanada
@AnalogboxmodsCanada 7 лет назад
With the batteries in series like this, yes 3 x 4V = 12V max output.... approximately, because the batts could be anywhere between 3.2V and 4.2V.
@sodalines
@sodalines 7 лет назад
thanks for replying
@bortolettof
@bortolettof 7 лет назад
Any way I can contact you directly? I have some questions for you on the build
@AnalogboxmodsCanada
@AnalogboxmodsCanada 7 лет назад
Sure man, use the contact form on the website, then we can email back and fourth, analogboxmods.ca/index.php?route=information/contact .
@williamlyman1096
@williamlyman1096 5 лет назад
I want to see a vopoo drag converted with a DNA 250c chip in it
@bortolettof
@bortolettof 7 лет назад
all the coloured wired are included in the kit?
@AnalogboxmodsCanada
@AnalogboxmodsCanada 7 лет назад
Yup!
@bortolettof
@bortolettof 7 лет назад
i saw all your video and really tempted to try to build my first mod. anything else i nee to read before starting?
@AnalogboxmodsCanada
@AnalogboxmodsCanada 7 лет назад
If you follow along with the vid and study the wiring diagram you should be all set :). If you are worried, the easiest and cheapest type of mod for a first build would be an unregulated/mosfet build.
@bortolettof
@bortolettof 7 лет назад
i am trying to make the order but it says no stock.. shall i continue anyway?
@AnalogboxmodsCanada
@AnalogboxmodsCanada 7 лет назад
I am currently out of the Smart PWM v2.2's (so is the manufacturer), I'm waiting on the new v3's which should be out in a few weeks. I don't think the website will let you complete the checkout if the item(s) are out of stock.
@marwak005
@marwak005 7 лет назад
do you sell fully built mods ?
@AnalogboxmodsCanada
@AnalogboxmodsCanada 7 лет назад
Yeah, contact me via the website and we can talk, analogboxmods.ca/index.php?route=information/contact
@willisjensen1987
@willisjensen1987 7 лет назад
How about some credit to the SPWM v2.2 manufacturer? Not to mention they have the wiring diagrams as well for those that need them.
@AnalogboxmodsCanada
@AnalogboxmodsCanada 7 лет назад
Yup, shoutout to Mark @ Voltrove and everyone else who contributes in the SPWM community!
@taunteratwill1787
@taunteratwill1787 5 лет назад
Yeah well, don't lose it on a soccerfield.
@R3loaded1313
@R3loaded1313 6 лет назад
Geez what a waist. MTL on a pwm. You that worried about battery life lol. Good video tho
Далее
iPWM, 2x20700, ABM-PWM Enclosure DIY Box Mod Build
42:33
ХУДШИЕ ВЫБОРЫ в США
13:20
Просмотров 505 тыс.
Turning Disposable Vapes into a Fast Charge Power Bank
10:39
A Small Box Mod Build with Voltmeter, MOSFET, LED
19:52
This should be illegal… Battery Repair Blocking
19:21
DNA 75 DIY Box Mod Build
1:00:40
Просмотров 31 тыс.
Making Professional PCB at Home - cnc WEGSTR
16:35
Просмотров 89 тыс.
ТАТУИРОВКА в МАШИНЕ
0:22
Просмотров 855 тыс.