Тёмный

Smokey & The Bandit Tribute Truck Ep.38 How Not to Polish Hucks 

TwinStick Garage
Подписаться 150 тыс.
Просмотров 58 тыс.
50% 1

#ProjectSnowman #100k #twinstickgarage
On this episode I continue with the ongoing restoration of this 1979 Kenworth W900A truck to turn it into a tribute movie truck to the one used in the 1977 classic movie Smokey and the Bandit with Burt Reynolds, Jerry Reed and Jackie Gleason. If you haven’t seen it yet, what are you waiting for??? “Daddy my hat blew off … I hope your G’dam head was in it”
On this episode I wanted to share something special that was delivered from RU-vid. Thanks to all the viewers, fans and especially the subscribers that love old trucks as much as I do and enjoy watching me find, fix, talk about and drive them! This channel is all about trucks and if you keep watching, I’ll keep posting and believe me, there’s lots still to come
So today I decided to attack the exterior of Project Snowman and decided to try a little trick a viewer suggested to clean up the huck bolt (rivets) that are used to attach all the body panels together. Unfortunately, it didn’t work out as well as I’d hoped, but I found another way as you’ll see in the video. After getting my fill of huck polishing, I decided to try a new tool I picked up to speed up and hopefully improve the process of sanding down the large flat panels. Slow going but in the end it’ll all be worth it when I finally get to lay down some etching primer followed by a coat of high build.
Hope you enjoy the video and thanks for all the comments, suggestions, and support!
Keep in mind, I know a little about a lot but not an expert in anything … just doing the best I can, learning as I go ... I do all my own stunts
Enjoy watching the progress of this Kenworth W900A project, the ongoing Peterbilt 359 restoration and the upcoming #IronDuke Kenworth K100 cabover I’m planning to build up like the one used in the 70’s trucking movie High Ballin’ with Jerry Reed and Peter Fonda.
Subscribe for notifications for future episodes that I do my best to upload new videos weekly on Thursdays
Note that for some reason RU-vid set my channel as made for kids awhile back so if you haven’t been getting notifications, just unsubscribe, re-subscribe and hit the bell to ensure you never miss an episode!
DayCab Company Custom Interiors: www.daycabs.com/
Gear Center: gearcentre.com/
Gratz Manufacturing: gratz-manufact...
Mrs TwinSticks Custom Bracelets: @natures_precious_stones: / natures_precious_stones
Twinstick Garage Instagram: @359twinsticks: / 359twinsticks
Mailing Address
TwinStick Garage
PO Box 21, Ardrossan STN Main
Alberta, Canada
T8E 2A1

Опубликовано:

 

4 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 390   
@Graemedixon80
@Graemedixon80 2 года назад
Thursday lunch viewing in the 🇬🇧
@sodapop8408
@sodapop8408 2 года назад
That socket thing was genius congrats on the 100000 👍👍👍👍👍👍
@meganallensmithjr2670
@meganallensmithjr2670 2 года назад
Twinstick Garage Best Channel on RU-vid
@ziptiesnbiasplies
@ziptiesnbiasplies 2 года назад
I just watched the Vidya of you pullin little by little out of the field again, first Vidya I ever watched of yours bud! You earned every subscriber, ya minty prick!
@eyeballdude
@eyeballdude 2 года назад
It’s funny how it’s a guy can see the same bunch of fellers, watching the same channels! Welcome to the ranks there feller!
@MVO884
@MVO884 2 года назад
Congrats with the youtube award. Its well deserved. I like your channel and the love and passion for the old American trucks you have, and bring them back to their old glory. Greets from the Netherlands
@woollyhat8536
@woollyhat8536 2 года назад
Deserved brother, Your work is better then produced TV automotive programs. And you’re hands on! So knowledgeable and honest when you aren’t. So refreshing. Informative, detailed, fun and easy to watch. Amazing channel
@raymondbradley6788
@raymondbradley6788 2 года назад
Congratulations Mark👍👍👍😎😎😎
@TheUltimateAlbert
@TheUltimateAlbert 2 года назад
Watching an old man working was never be so satisfying.
@TwinStix
@TwinStix 2 года назад
Old man??? 😂 thanks for that…
@TheUltimateAlbert
@TheUltimateAlbert 2 года назад
@@TwinStix Older than me, so it counts😁 Thanks again for the video, mate.
@shanehorn8848
@shanehorn8848 2 года назад
Congratulations, brother. I've been watching your videos since you started on little by little. It's awesome what you're doing. Great job, and again Congratulations 🎊 👏
@xxblacktoothgrinxx3744
@xxblacktoothgrinxx3744 2 года назад
If you haven’t been able to find it your air nozzle fell between the cab and the sleeper. Awesome work as always! 👍🏻👍🏻👍🏻
@AllanLibert-Simons
@AllanLibert-Simons 2 года назад
Welldone Mark on your award. Well deserved 👍
@desperadopete3795
@desperadopete3795 2 года назад
Great on the 100.000 Trucks are looking good. Love the dedication to the ole school rigs. Stay safe everyone.
@gabdumont2094
@gabdumont2094 2 года назад
Nothing better than a lill bit of twin stick and cold beer on friday after work Thanks bud for your work Best sound of the week is twin stick theme and a new video
@mattbrown9484
@mattbrown9484 2 года назад
He he .... ‘spent all day and it doesn’t look like I did very much’ .... Grasshopper, you are going to learn a valuable lesson.
@МихаилЛевеляйнен
@МихаилЛевеляйнен 2 года назад
RUS Leningrad. Поздравляю с наградой ютуб. Спасибо за видео. Ждем продолжения через неделю. Здоровья тебе и семье.
@douglasnoble9056
@douglasnoble9056 2 года назад
Congratulations on the award, I really enjoy watching the transformation of your trucks looking forward to seeing snowman and the duke moving closer to what you want.
@garydeffenbaugh1096
@garydeffenbaugh1096 2 года назад
Saw Jerry Reed the Snowman in concert down in Macon Georgia at the fairgrounds back in 2000. They put on a good show.Actually got to meet him and his wife who also played in the band. Nicest man you ever wanted to meet. He would be pretty proud of your work your doing on the replica truck if he was still alive.
@joeroad6618
@joeroad6618 2 года назад
When sanding the large radius on the roof, hold the air file horizontally and go up and down at an angle and overlap the strokes by half of the sander surface, this helps preserve the original radius and keep it smooth without creating grooves.
@matthewweldin7888
@matthewweldin7888 2 года назад
Yup, I was going to comment the same thing.
@eyeballdude
@eyeballdude 2 года назад
Same here
@conwayconway2177
@conwayconway2177 2 года назад
Beautiful man just beautiful. Congrats Twinsticks family 👊🇨🇦♥️👏🎉🥳🎉👏👏. Of course I never doubted it ..I believe in this channel...but inorder to do that I first believe in The Creator 🤘
@blakerichardson414
@blakerichardson414 2 года назад
Small tip, always start with the least invasive method when doing body work. Congrats on the 100k!
@jeepanimal2943
@jeepanimal2943 2 года назад
Haven't finished watching the vid yet. Congratulations on 100k Mark. You deserve the silver plaque.
@stephenlittle7769
@stephenlittle7769 2 года назад
This is the best part of Thursday mornings!
@robertbuttlar8008
@robertbuttlar8008 2 года назад
Im here nice and early today. Good way to start the morning.
@christopherjohnson6056
@christopherjohnson6056 2 года назад
At last ,nice .👍
@robwilliams3484
@robwilliams3484 2 года назад
A nice stained wood wall section with all those old KW logos and such and now the play button would be a nice backdrop for content that’s not attached to the truck.
@larryblankenship8104
@larryblankenship8104 2 года назад
Good job Mark injoy the videos congrads on the plack keep up the great work can't wait to see tge finished project. God bless my friend.
@cowboy5252
@cowboy5252 2 года назад
So we’ll deserved Mark, your vlogs are so entertaining, best wishes from the UK! 🇬🇧👏🏻👍🏻
@masterofdisaster7427
@masterofdisaster7427 2 года назад
Nice!
@kenmurray4232
@kenmurray4232 2 года назад
Old plastic mudflaps make great bondo pallets. Just cut down to a good size & clean the road grime off. Looking good.
@caveone-365
@caveone-365 2 года назад
Roloc disks. Yup the old cookie wheel is probably your best bet. They make a softer bristled green pad that might work well on the body for not taking off too much material. I use the green bristled ones on cylinder heads and cleaning off flanges on aluminum where you don't want any material removed. Project Snowman is awesome 😁👍
@tommyhall8301
@tommyhall8301 2 года назад
Good to see you again buddy
@19MarcoPolo71
@19MarcoPolo71 2 года назад
(Standing ovation!) Congratulations Brother!
@masolyoung1712
@masolyoung1712 2 года назад
Congratulations keep pressing forward
@bigal-ox9jw
@bigal-ox9jw 2 года назад
Awesome entertainment. EAST COAST CANADA 🇨🇦
@alanscarborough9111
@alanscarborough9111 2 года назад
Congratulations Mark keep up the good work loving this channel regards Alan from the UK
@derrillbalshaw1199
@derrillbalshaw1199 2 года назад
Congrats on passing the 100K subscribers, I've been a subscriber for quite a while, almost 4 years now. I found your channel from your will it start vid "Peterbilt 359 Restoration Ep.6 “First start in 10 years!!!" you had around 20 thousand subscribers back then. You was sandblasting the frame at the time, so it was around April 2018 when I joined. I watched all the videos I had missed on Old blue little by little and was hooked from then on.
@meganallensmithjr2670
@meganallensmithjr2670 2 года назад
I second that Congratulations Mark all your hard work and determination is paying off I was hooked on your first video of LBL
@ericbelk5644
@ericbelk5644 2 года назад
Shotgun 😜😆💯
@avery_mcfalls
@avery_mcfalls 2 года назад
hard to believe it was that long ago, same as well.
@alexanderkhizhnyakov417
@alexanderkhizhnyakov417 2 года назад
congratulations I wish you a million subscribers ! 😃👍
@amoswoodside5551
@amoswoodside5551 2 года назад
Congratulations twin sticks for getting to 1000k Subscribers
@HattemMorse
@HattemMorse 2 года назад
Keep up the awesome work brotha!!
@fionakeller2176
@fionakeller2176 2 года назад
Huck rivet shaver will do perfect job
@oubliette862
@oubliette862 2 года назад
that adhesive backed sandpaper roll is nice very convenient. good deal with the 100,000 guy pleased to hear it. truck are cool, less i'm behind one lol.
@25slider
@25slider 2 года назад
Thanks Mark for the awesome video congrats on the hundred thousand thanks again
@tate8020
@tate8020 2 года назад
Congratulations. I’ve become more and more intrigued in your videos waiting on the new ones. I actually bought the first movie at our local Walmart for a third time. And sat down one Saturday and watched the movie with my 2 year old little girl. She absolutely loved it. She actually was riding shotgun with me at about 12 weeks old. Just like her dad 16 years ago. We sure do enjoy watching you build the snowman truck. Keep up the good work
@road-runner9521
@road-runner9521 2 года назад
No thank you buddy you have brought us great videos and all made us laugh and feel like we’re welcome so thank you
@wbball15
@wbball15 2 года назад
Great stuff, TwinSticks! Congrats on the PLAY button.
@mh-tn3ic
@mh-tn3ic 2 года назад
Congratulations on getting a plaque it deserves a large frame
@justinjelenek4915
@justinjelenek4915 2 года назад
Waiting on my dispatch to send the proper order number so we can start moving some dirt. So yes, I will watch some Twin Sticks.
@darylthisdelle7702
@darylthisdelle7702 2 года назад
Wow 100 K mark. You know the old saying, You have come a long way baby,(Twin). I love the new version on how the video starts. Ya know after watching you walk through the snow to the barn then watching you work inside in overalls, sweater, running shoes and reversed baseball cap , it shows how far you have come. Gone are the days when that was good enough, now the bar has been lifted higher. You tackle jobs with such strong confidence like a quarter back going to throw the game winning pass.
@darylthisdelle7702
@darylthisdelle7702 2 года назад
I am blessed I am one of the 100 K that view you every step of the way, nice vid Twin..
@jermainesmith5466
@jermainesmith5466 2 года назад
Congrat Mr. Twinsstick keep on turning those wrenches
@irons43
@irons43 2 года назад
I am a fan of the die grinder! I use it in my metal work for almost everything. The scotch brite bristle disk is something that may work really well for this. I use it when changing head gaskets ect as it doesn’t take material away as your cleaning the metal.
@adamprost6024
@adamprost6024 2 года назад
The work you put on the truck looks great
@spottedhoss1920
@spottedhoss1920 2 года назад
I gotta say Mark you are a persistent cowboy, It really impresses me how you find what you need. You're doin a fine job my friend lookin forward to the next one.
@drjoci
@drjoci 2 года назад
that opening XD i love it
@scotttait2197
@scotttait2197 2 года назад
Congratulations on passing 100000 subscribers it is well deserved regards from Scotland 🏴󠁧󠁢󠁳󠁣󠁴󠁿
@vincedechant448
@vincedechant448 2 года назад
Congratulations!
@amcf2000c
@amcf2000c 2 года назад
been here from the start :) keep them coming 👍
@dragonfreak480
@dragonfreak480 2 года назад
Congrats in getting your RU-vid 100k subscribers plaque TwinSticks
@user-KrackerJack
@user-KrackerJack 2 года назад
Congrats Mark 👍🏼
@buckndoe1193
@buckndoe1193 2 года назад
Congrats on your Award!!! We also used to modify 16mm and 25mm drill brushes to do rivets in the Air Force. The socket trick works if you tape a rag over it to keep the socket from leaving rings, then stuff a lighter gauge steel wool in it. You gotta use gentle pressure with slower speed. Don’t forget to prime and dust coat paint your rivets first. Paint seems to creep out from under them at the worst time if you don’t
@bigred1247
@bigred1247 2 года назад
Why is he calling them hucks they are cap rivets and yes aircraft use these
@truckercowboyrobertharris6787
@truckercowboyrobertharris6787 2 года назад
Great Video. It was hard to watch because I didn't had my contacts in because they're taken out. My eyes were burning and stinging this morning.
@247Therocker
@247Therocker 2 года назад
Nice work, Mark. You’re loyal followers are happy for your success. Hard work definitely pays off.
@bon2198
@bon2198 2 года назад
Such a minty plaque! Congrats mark!
@tempestmkiv
@tempestmkiv 2 года назад
Congrats Mark!
@scottmcnabb9122
@scottmcnabb9122 2 года назад
Congrats mark from Ontario great job keep it up brother love your channel don't stop restoring trucks .cheer's.
@kerryevans7413
@kerryevans7413 2 года назад
Congratulations on the 100K subscribers. I have been trucking in the states for 21 years and counting. Long time sub to your channel back when first found the blue PETE. Love watching your videos it's just something about trucking it gets in you blood and you can't get rid of it. I love the old cab- overs also. Keep up the Great work.
@Ezrider359
@Ezrider359 2 года назад
congrats on the play button mark 👍 quite the achievement!
@SWC44
@SWC44 2 года назад
CONGRATS!!!!!!!!!!! YOU DESERVE IT!👍👍👍👍👍
@kwtrkr190
@kwtrkr190 2 года назад
Hey Mark really enjoy watching the work you do. You certainly have a lot of patience. I've owned each of the same trucks you have at different times and love the old school stuff. Keep up the great work.
@alejandrocruzenriquez8827
@alejandrocruzenriquez8827 2 года назад
En hora buena y siga cosechando mad reconocimientos por RU-vid, saludos desde Tampico, Tamaulipas México, se ve q le gusta hablar español mandé saludos en español hay mucha gente suscrita a su canal de habla hispana
@bmashak137
@bmashak137 2 года назад
Congratulations! I'm fixin to throw on some Waylon and have a Coors for you and Snowman!
@stewbird
@stewbird 2 года назад
Let's go for the gold button
@richardherbert6665
@richardherbert6665 2 года назад
Thanks for the videos Mark!!
@richardgooding498
@richardgooding498 2 года назад
My buddy built a outside building for air compressors or anything that makes noise. If you run the hoses through the wall you wouldn't hear the compressors. Great job on your truck man. 👍👍👍👍👍👍👍✌️😁
@monica93304
@monica93304 2 года назад
Congrats on the RU-vid award. FYI, you're not alone in cracking open some PBR's during these episodes.
@love2spinvinyl
@love2spinvinyl 2 года назад
Congrats on the Award, such a great achievement. Stumbled onto your channel January 2020 when i burst a disc in my back and was laid up for 2 months (all good now), I was watching a lot of Kombi and air cooled restorations, RU-vids algorithm somehow thought I’d find your channel interesting. I never had an interest in Trucks at all, but since then I haven’t missed one of your episodes and can’t go past a truck now without giving it a good look. Thank you from Brisbane Australia for sharing your passion with us.
@MaxFluff
@MaxFluff 2 года назад
congrats on the play button!! road to 1 mill has started!
@alvinfink589
@alvinfink589 2 года назад
Congrats on the 100k, crazy that it's been 4 years since I've been watching. I don't remember what the first video I watched, but it was in the first 5. Always like watching your videos!
@lensmith8242
@lensmith8242 2 года назад
great job here’s to another 100,000 !!
@fazerainbow5674
@fazerainbow5674 Год назад
awsome video mark did a really good job as always on the body work when sanding the large radius on the roof hold the aire file horizontally and go up and down at an angle and overlap the strokes by hafe of the sander surface this helps preserve the original radius and keeps it smooth without creating grooves thumbs up and shared
@johnellis9147
@johnellis9147 2 года назад
Long time coming, the 100k mark.
@dawulf72
@dawulf72 2 года назад
Congrats from Austria/EU !
@stevengrobbelaar2334
@stevengrobbelaar2334 2 года назад
We use the 3m scotch bride roloc bristle discs at our rebuild shop. It does not damage the metal but cleans off the corrosion.
@donnatalielucasheimbigner7598
@donnatalielucasheimbigner7598 2 года назад
Cool award that RU-vid gives out. Well earned with great content. I was about to scribble to get a roloc gasket prep kit when you pulled it out. Lol. Isn't it completely amazing how much time & effort it takes to fix up an old vehicle? You're doing a good job and it will be very satisfying when you're at truck shows later on. The Mrs. needs drive one at that point so you can show off at least 2 at a time. Keep on posting, I will keep on watching. Thanks for sharing.
@cclapew
@cclapew 2 года назад
Nicely done.....dont get too worried about the low spots just yet... get the dings and dents done and get the epoxy primer on the old gal.... shoot a coat of high build primer followed by a guide coat.... then its time to worry about the low spots
@russbrittain7379
@russbrittain7379 2 года назад
Congratulations on 100K Subscribers and another great video for Thursday Morning 🌄😎 until next week
@andrewparker9055
@andrewparker9055 2 года назад
Congratulations! You earned it great content. Smoky and the Bandit was one of reasons I drive truck now and the fact that my grandfather drove as well as my brother and father . Love it, I look forward to a new episode every Thursday.
@psg6314
@psg6314 2 года назад
Congrats on your 100 keep up the good work
@wayneparks5601
@wayneparks5601 2 года назад
Congratulations on the 100k! You should do a piece of wood a few inches bigger behind it painted black and it would make that stand out against that white tin real minty!
@albertomoniz9051
@albertomoniz9051 2 года назад
Once you have the major bondo work done spray the sleeper ,cab and hood with primer filler,you'll need a spray gun with a1.8 nozzle .this primer is a two part primer which the same hardener is used in fiberglass resin .it will fill all the little imperfections like on the hawks bolt heads. When it drys .block sand it with 220 and then 400 and paint
@louisroman7134
@louisroman7134 2 года назад
Thanks for sharing.
@maxihaugh1267
@maxihaugh1267 2 года назад
Mark, Congratulations on a great achievement 100K in subscribers!! Great content on your channel you will continue to grow.
@nhp1508
@nhp1508 2 года назад
Great job Mark
@killerninjakitty815
@killerninjakitty815 2 года назад
Thanks for the video and congrats on your achievement
@garyablett5180
@garyablett5180 2 года назад
I am impressed with your new artwork ! Looks to be 'Post Modernism from the Heidelberg School'. Next episode I hope to see you with a beret and palette as you complete your masterpiece.
@jasonmyers7410
@jasonmyers7410 2 года назад
😂😂😂😂😂😂
@johnclamshellsp1969
@johnclamshellsp1969 2 года назад
Congratulations on the 100K+ subs. Thank you for all the great videos that are great to watch and vast learning. 60107 USA says hi.
@ff912
@ff912 2 года назад
Can’t wait to see the finished product (s). Great work and music.
@thomasbailey8306
@thomasbailey8306 2 года назад
Absolutely a Trucker Brought it..Just watched Smokey and The Bandit Movie last Weekend..LOL..Paying close attention to the truck. Yours is a Perfect match from what I can see. So Good Job on the old girl so far..Great Movie and Video. And Congrats on the 100k.
@jorgealejandromartinezhern6239
@jorgealejandromartinezhern6239 2 года назад
Saludos!! Es un proyecto muy bueno esperamos que pronto quedé listo!! Felicidades
@thecapturban
@thecapturban 2 года назад
Congrats on the Button! Hit it with some black sandable spray paint first it will help to see the low spots as well!
@Sircraig7963
@Sircraig7963 2 года назад
Gday Mark,, Its our pleasure to support you & your channel....... I was obvious from the first episodes that "Twin Sticks Garage" was going to be a fantastic truckin channel, it had that cool layed -back winning formula, Every episode has been informative, progressive & on topic .... Roumer has it, (L by L), even Zip Ties is adding culture to his part of the world ,,, Just from watching his weekly fix of Twin Stix Garage ,,, Congratulations on a Great channel Mark ....!! Respect from Down Under
Далее
🦊🔥
00:16
Просмотров 789 тыс.
Smokey & The Bandit Tribute Truck Ep.55 Split Ring King
22:39
1986 Ford LTL 9000 walk around and Ride along
11:07
Просмотров 41 тыс.
James May finally drives the Tesla Cybertruck
14:15