Тёмный

Smokey & the Bandit Tribute Truck Ep.39 Powder Coating Chrome 

TwinStick Garage
Подписаться 148 тыс.
Просмотров 68 тыс.
50% 1

#ProjectSnowman #twinsticks #twinstickgarage
On this episode I continue with the ongoing restoration of this 1979 Kenworth W900A truck to turn it into a tribute movie truck to the one used in the 1977 classic movie Smokey and the Bandit with Burt Reynolds, Jerry Reed and Jackie Gleason. If you haven’t seen it yet, what are you waiting for??? “I’ll be within earshot you keep ‘er wound up to around ninety”
On this episode I wanted to try something new, so I purchased my own powder machine and small toaster oven to try my hand at powder coating. First on the list was to etch the chrome rings that are just standing out too much and will not look right unless they’re coated black, so they needed to be sand blasted and then I was ready to go. Powder coating is quite easy and very forgiving and now that I know it works so well, I’m planning on getting a larger over and already have plans for many more components on the truck to get coated in future episodes.
Hope you enjoy the video and thanks for all the comments, suggestions, and support!
Keep in mind, I know a little about a lot but not an expert in anything … just doing the best I can, learning as I go ... I do all my own stunts
Enjoy watching the progress of this Kenworth W900A project, the ongoing Peterbilt 359 restoration and the upcoming #IronDuke Kenworth K100 cabover I’m planning to build up like the one used in the 70’s trucking movie High Ballin’ with Jerry Reed and Peter Fonda.
Subscribe for notifications for future episodes that I do my best to upload new videos weekly on Thursdays
Note that for some reason RU-vid set my channel as made for kids awhile back so if you haven’t been getting notifications, just unsubscribe, re-subscribe and hit the bell to ensure you never miss an episode!
DayCab Company Custom Interiors: www.daycabs.com/
Gear Center: gearcentre.com/
Gratz Manufacturing: gratz-manufacturing-inc.busin...
Mrs TwinSticks Custom Bracelets: @natures_precious_stones: / natures_precious_stones
Twinstick Garage Instagram: @359twinsticks: / 359twinsticks
Mailing Address
TwinStick Garage
PO Box 21, Ardrossan STN Main
Alberta, Canada
T8E 2A1

Авто/Мото

Опубликовано:

 

16 мар 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 420   
@danmacsween3448
@danmacsween3448 2 года назад
I learn something new every episode you do ! You have the best “ohh yeah” in the business! Great job Twinsticks!👍🇨🇦
@waynetrain8033
@waynetrain8033 2 года назад
Kids, your dad is going away for awhile. He’s got “powder coating addiction “ the parts looked 👍
@Mrsteve4761
@Mrsteve4761 2 года назад
Never knew how "doable" powder coating could be. Thanks for enlightening me and, I'm sure, many other viewers
@Yet1moreUtuber
@Yet1moreUtuber 2 года назад
From putting in lights to buying a sand blast cabinet,..sounds right.
@ericceulemans7851
@ericceulemans7851 2 года назад
Marc knows by now you like nostalgia, old real trucks, cars, movies. maybe something to see . Rolling vengeance of 1987 I saw him when I was 10. very nice movie pure american movie . the good old times. I'm also very nostalgic Take care men...
@steventegeler7084
@steventegeler7084 2 года назад
Am not a trucker but am really enjoying watching videos on project snowman. You are doing awesome work. Looking forward seen it done.
@tomjoad1363
@tomjoad1363 2 года назад
Unpacking tip : return the carboard box upide down. Cut the adhesive tape on the underside. Put the box in correct position. Pull up the box. There you have your purchase sitting on the floor on it's foam protection. ^^
@TwinStix
@TwinStix 2 года назад
Good tip 👍
@carlwilliams1570
@carlwilliams1570 2 года назад
I have an Eastwood powder coat rig similar to yours. I used an old free oven and took all the racks out of it and used some pipe across it to hang parts from the same wire I hung them from while spraying. That makes it easy not to bump the powder off. You will find it a good system to color engine accessor brackets and lots of small parts.
@robertbuttlar8008
@robertbuttlar8008 2 года назад
7 on the dot every Thursday. I look forward to this more than I did Saturday mornin cartoons.
@kevinjones2667
@kevinjones2667 2 года назад
Me to Robert
@deadtruckressurection8454
@deadtruckressurection8454 2 года назад
Aren't new tools/toys just a joy. Powder coating was a big deal not that long ago that required things be sent out to one of a limited number of specialty shops, now a fella can do things like this at home. I was watching an episode of Wheeler Dealers a few days ago and they used a similar process to shoot on a chrome like finish on a vintage car they were doing. These are great days were living in :-) That heater cover came out beautiful too, and should last a lot longer than paint too. I really enjoy watching you work on these trucks.
@josephboley
@josephboley 2 года назад
Good morning 😃✌️
@carriebrumley8926
@carriebrumley8926 2 года назад
Your right I did learn something new. I love watching your channel. Thanks for sharing. I'm a fan of Smokey and the Bandit!!!
@conwayconway2177
@conwayconway2177 2 года назад
Hey Mark what a fine job sir...I applied it as always...oh have I mentioned that I love this channel..lol...Woop Woop 🤘🇺🇸✝️🇨🇦😉👍
@thomasaley8839
@thomasaley8839 2 года назад
Blessings to you and your family One Stop Tommy
@rebeccashulenburg9842
@rebeccashulenburg9842 2 года назад
Slow and steady wins the race!!!
@kenworth2343
@kenworth2343 2 года назад
Great job Mark. If you don't want to wire for an electric oven, you could get a gas stove and convert it to propane. Fairly easy conversion.
@DoubleRRestorations
@DoubleRRestorations 4 месяца назад
I'm really enjoying the series. Been watching a few every evening. I also like powder coating alot. Its a hobby within a hobby. Ive got a few vids on it on my channel. Its very handy for restoration work. Keep up the great work Mark.
@bon2198
@bon2198 2 года назад
When adjusting the PSI on the powder coater take the gun and spray it into your hand. When you can barely ripple your skin the PSI is perfect. And nice you bake a part in an oven you can NEVER put food in it. So don’t cook any hot pockets in there in the shop. 😂 great job.
@dandersonjr
@dandersonjr 2 года назад
One of the many things I like about your channel is the innovation. Most people would take those things to a powder coater but not Twin Sticks. He says I can do it on my own and shows us how to do it at the same time. Impressive. Thanks.
@sodapop8408
@sodapop8408 2 года назад
Happy twin sticks day everyone my favorite RU-vid day of the week 👍👍👍😎
@craigr6763
@craigr6763 2 года назад
Every time you put something in your oven I think of that info commercial for the ronko rotisserie “ just set and forget it” 😂
@raymondbradley6788
@raymondbradley6788 2 года назад
Good job Mark👍👍👍
@donaldestwanick9776
@donaldestwanick9776 2 года назад
Next time you powder coat with that oven, flip it on it's back, keep in mind ventilation under it, and dangle your part from a rod. You cn applie more powder while the material is still hot. You just have to work quickly and not load too much on. Love your vidieos !!
@printerman99
@printerman99 2 года назад
I love it with the Trailer Park Boys thrown into your videos 🙂
@Mrburger-um8by
@Mrburger-um8by 2 года назад
My gosh man you're living the dream... congratulations on your work and shop .... 👍
@alangovan1852
@alangovan1852 2 года назад
That's really cool the way that you've powder coated them rings , better Black
@cattlerepairmancattlerepai9414
@cattlerepairmancattlerepai9414 2 года назад
Powdercoat gun and sand blasting cabinet. Two items I have been ogling at Princess for a while! Good job!
@donnatalielucasheimbigner7598
@donnatalielucasheimbigner7598 2 года назад
Nice work. Love the heater box cover. Your fleet will be outstanding when you get them all finished. Keep up the hard work.
@davekrawiec3807
@davekrawiec3807 2 года назад
Love your channel Mark. Your doing what most of wish we could. Live and love your dreams. If you and the truck make it to Ontario, make sure you let us know your coming
@Turksonbass
@Turksonbass 2 года назад
Enjoy the videos thanks for embracing the country music!
@jamestedrow6389
@jamestedrow6389 2 года назад
The ring looks a lot better than a rubber grommet!!!
@johnnyholland8765
@johnnyholland8765 2 года назад
I have seen your intro so many times but for some reason this time your first trucks picture showing where you found it to opening the door into what it is now just jumped out at me and made me realize just how much work you put into it. The other trucks will stand out as well in time. Just keep plugging away at it...
@Logan7P88
@Logan7P88 2 года назад
Looking great brother, always a pleasure seeing you make progress!
@steveray7770
@steveray7770 2 года назад
Place the small rings from inside the hood to have only the lights showing on the outside, sometime they glued on as well. Great video !
@bigmackstruckstop9213
@bigmackstruckstop9213 2 года назад
I love watching your show, I wish you could have the twice a week, catch next week mark.
@fernandoffdes
@fernandoffdes 2 года назад
very beautiful your work, congratulations, 👏👏👏👏👏
@jessemerriam9732
@jessemerriam9732 2 года назад
Same here learn something new every day nice job marc that cover came out great
@caveone-365
@caveone-365 2 года назад
Nice work on the powdercoating Mark! I have used an old oven as well, but a full size one which is good enough for most larger stuff like valve covers, control arms, springs, etc. Sure beats a rattle can. The blast cabinet is definitely a very useful purchase as well just for the sheer fact that media blasting cuts down on prep time/ effort, but since you restore old stuff and live in the wonderful rust belt it's a necessity that'll definitely see it's share of use. Much easier to use a gun and shoot glass, sand, walnuts, etc at the part then spend the time and pain with grinders, wire bushes, sandpaper, etc. Takes a hell of a lot longer, and no way gives you a nice uniform finish or allows you into the crevices like blasting does. Project Snowman ROCKS! Keep up the excellent work buddy!😁👍👍
@johnc.gordon131
@johnc.gordon131 2 года назад
Well done mate, have loved watching your videos for the past couple of years. See you next episode. John Queensland Australia.
@debrastarke3996
@debrastarke3996 2 года назад
Back in the old days those round lights were mounted to trucks and trailers with rubber grommets
@redbaron9965
@redbaron9965 2 года назад
These videos are so much fun to watch. Thank you sir!
@jimdieseldawg3435
@jimdieseldawg3435 2 года назад
Hey Mark. Great new skills and a tidy job! Might help later: you can buy powdercoat chrome, for restoring shiny bits that are too tired to polish-up nicely. Same exact process and bakes to a mirror shine 🙂🤟🏼
@d.c.sterbenz7216
@d.c.sterbenz7216 2 года назад
I really enjoyed learning with you. Great episode.
@JoE_Songs
@JoE_Songs 2 года назад
awesome. what a satisfying result... this'll look mean and clean. congrats.
@mooselmao8346
@mooselmao8346 2 года назад
This series makes me wanna buy an old truck and work on it while I'm not working 🥺
@wadelevan1787
@wadelevan1787 2 года назад
We appreciate you Mark!
@Tbmx8
@Tbmx8 2 года назад
That sand blaster is such a valuable tool, any part you want cleaned such as fittings and even metal your going to weld on is way easier to be prepped. Love your content been watching since day 1. Keep up the great work 👍🏻
@carlosdalgo4953
@carlosdalgo4953 2 года назад
The videos also in spanish, many people watching, congratulacion ...hi from Ecuador- Bahía de Caraquez
@fader2701
@fader2701 2 года назад
thanks for showing the process of powdercoating
@Ktgsvtrdg66
@Ktgsvtrdg66 2 года назад
You better be cooking chicken fingers after those parts come out! Bubbles and Julian will be here any second!
@TwinStix
@TwinStix 2 года назад
Ah man I missed a good cutaway opportunity didn’t I? 😂
@954dragracer
@954dragracer 2 года назад
A little trick for mutli colour powder coating. You can get heat resistant masking tape in some pretty narrow widths. You could use it like pinstripe tape to cover the kenworth logo so it doesn't end up black.
@MrYahoo74
@MrYahoo74 2 года назад
That powder coat sure is minty 👌
@wirenut003
@wirenut003 2 года назад
Glad you went for the blasting cabinet,makes the job cleaner and it works better then open air gun type.
@russellweibel375
@russellweibel375 2 года назад
Great video it brings back some memories of my years past wanting my truck to always look it’s best.
@simonturner10
@simonturner10 2 года назад
Nice work again dude, LOVE the way that Kenworth emblem came out at the end. Your attention to detail knows no bounds, awesome stuff. Thanks again for top content and keeping me sane
@1Truckman
@1Truckman Год назад
I learned something today...I learned I need to re-adjust my budget once again so I can buy some cool new toys for my own projects...This never ends, does it?...
@TheParanormalPieman
@TheParanormalPieman 2 года назад
Those black rings would also look good on a red truck with black accents :D
@billyhaddock5540
@billyhaddock5540 2 года назад
Congrats Mark on getting things sandblasted and powercoat. looks great. lv ur videos.
@waynegibbons352
@waynegibbons352 2 года назад
Try this for checking to see if you have enough material on the coated object before baking it. Shine a flashlight on the object - any bright spots should show where you need to add more colourant. Saw this on a recent video by Robbie Layton's youtube channel
@stevenknight3923
@stevenknight3923 2 года назад
Looking good my friend ... can't wait to see him finished
@backpi
@backpi 2 года назад
Mark thank you very much!! You made a longer video.👊🏾😁 I love me some twin sticks here in Texas. ❤
@JasonVoorhees997
@JasonVoorhees997 2 года назад
what town in texas
@backpi
@backpi 2 года назад
@@JasonVoorhees997 Temple Texas. I'm right between Austin and Waco.
@fordy2604
@fordy2604 2 года назад
That’s brilliant mate very satisfying too watch. Clever fella you are mate. Gonna be a lovely looking truck 👌👌 regards from south London England 🏴󠁧󠁢󠁥󠁮󠁧󠁿
@joehardhat5598
@joehardhat5598 2 года назад
I had a small compresser In my garage I wanted to increase the air capacity I went to the local propane dealer he had rebuilt propane tanks I bought a 100 gallon rebuilt propane tank for a $100 dollars attached to the compressor And I tripled my air capacity capacity the 1st time you air it up it takes a while but after that it's like having a second compressor like the videos 👍
@bigal1568
@bigal1568 2 года назад
Hey Marc connect a shop vac to your blast cabinet while blasting to help with the dust when you open the foor
@alanpearson1844
@alanpearson1844 2 года назад
Like a kid at christmas, happy new toys 👍
@neteaadrian1654
@neteaadrian1654 2 года назад
Thank you for the video, you are doing a great job .
@thecapturban
@thecapturban 2 года назад
Like i commented before Mark, use that secondary regulator on your air tools, it will save the air compressor from kicking on and give a more consistent use.. looks great brother
@jasonthomas4671
@jasonthomas4671 2 года назад
Love watching your shows
@ramongiron856
@ramongiron856 2 года назад
Hey Mark, I found this thought I'd share. Grote 45413 clearance marker light. It looks like it has a base that screws into the body and has a bulb. Lens snaps onto base. I like the route you went, it's flush, little more up to date. Keep up the good work and the great videos. Take care.
@busterpritchett4162
@busterpritchett4162 2 года назад
Looking good Betty Crocker
@leeharris6328
@leeharris6328 2 года назад
You can get some yellow powder and spray it on the kenworth logo and get a small paint brush and wipe what you don't want yellow on off (looking at how it wiped off on your glove)
@maxihaugh1267
@maxihaugh1267 2 года назад
You doing a great job Mark. Love seeing the progress!
@tommyhall8301
@tommyhall8301 2 года назад
Good to see you an your trucks Mark take care buddy
@carstennelson4830
@carstennelson4830 2 года назад
Came out great... That gave me the idea to try powder coat... Thanks..
@alexanderkhizhnyakov417
@alexanderkhizhnyakov417 2 года назад
everything you've done in this video looks amazing 😀👍
@joemode101
@joemode101 2 года назад
Great job Mark very nice👍🏼 most Powdercoat guys use the smoker cabinets for powder coat for bigger parts
@johnpetersen8116
@johnpetersen8116 2 года назад
Learning a bit more right along with ya! Nice results...
@hawkdsl
@hawkdsl 2 года назад
"Hi-on-day"? Love power coating.. So simple, and it is virtually indestructible.
@TwinStix
@TwinStix 2 года назад
What … that’s not right? 😂
@hawkdsl
@hawkdsl 2 года назад
@@TwinStix I've always heard it as "Hawn-day".
@fazerainbow5674
@fazerainbow5674 Год назад
awsome video mark handy that you bought the sander and powder coating machine will be a big help for future projects thumbs up and shared
@corywatson3942
@corywatson3942 2 года назад
That’s awesome Mark, looking great!
@gerardtatchell81
@gerardtatchell81 2 года назад
Keep at it bro ! Love your channel and content ! Can’t to see Smokey and the Duke finished !
@louisroman7134
@louisroman7134 2 года назад
Thanks for sharing.
@darylthisdelle7702
@darylthisdelle7702 2 года назад
Wow the new roads you keep going down. Great Vid Twin. Hey I’ll bring the coffee you make the cookies. Do a deep dunk. Woooohoooo
@snoman003
@snoman003 2 года назад
"Ding, fries are done" Looks good.
@badboybennyhill
@badboybennyhill 2 года назад
Just starting to watch, can't wait to see this week's shenanigans lol
@FarkyDave
@FarkyDave 2 года назад
As I've said before, you inspire me to try projects on my own. I'm usually afraid of messing up, and so I don't do the darn project. Thanks for the inspiration!
@mrhcnetman
@mrhcnetman 2 года назад
You can buy a smoker and it will work better than a oven. You get more vertical space where you can hand longer items than you can in the oven. Then all you have to do is carry the item by the wire and hang it in the smoker.
@AnguianoFarms
@AnguianoFarms 2 года назад
I was inspired by you now I’m restoring a ford bronco
@RyanGlenn810
@RyanGlenn810 2 года назад
For painting those finer details you might like some liquid mask. You can get finer details than with tape. If you have trouble finding a small amount various company's offer if for RC cars.
@tempestmkiv
@tempestmkiv 2 года назад
Well done Mark!
@waltereldridge9447
@waltereldridge9447 2 года назад
The Fun Never Ends. 😅
@brianburns7211
@brianburns7211 2 года назад
Nice work. You’ve mentioned a bigger compressor a few times before today. If you look on something like Craigslist or online garage sale you can sometimes find a nice one. I found a 60 g older one for $200. Some older ones are built to last better than newer ones. Just keep an eye until the right one comes up.
@lk.tuning
@lk.tuning 2 года назад
Nice stuff.. 👍 Greetings from Finland 🇫🇮 … There is also snow here…
@dougr8594
@dougr8594 2 года назад
Really do enjoy this stuff, I’m a huge A fan.
@cowboy5252
@cowboy5252 2 года назад
Love watching you work on your trucks Mark, entertaining & informative. Keep up the great work bud. Looking forward to seeing Snowman on the road! 🇬🇧👏🏻👍🏻
@toddcarson4173
@toddcarson4173 2 года назад
You’re having too much fun, looks great
@rudycarlson8245
@rudycarlson8245 2 года назад
Thursday is always good when we start off the day with a cup of coffee and a new video from twin sticks garage
@geraldnulischjr
@geraldnulischjr 2 года назад
it's your project u do it the way u want to
@Sauerbrew777
@Sauerbrew777 2 года назад
Watch out! The sand blasting/powder coating bug can get wild! Next thing you know you'll be wondering if you can make an oven that can the whole chassis!
@Ryanfry262
@Ryanfry262 2 года назад
I can see why Mrs. Twinsticks didn’t want you powder coat baking in the house. It makes a mess. Cool vidya, Mark!
Далее
DIY CUSTOM BUILT POWDER COAT OVEN (SAVE TONS OF MONEY!)
25:59
CHAMPION TRUCK LINE Freightliner Cabover | EL VERA
1:47
Smokey & The Bandit Tribute Truck Ep.55 Split Ring King
22:39
Is At-Home Powdercoating Worth It?
17:51
Просмотров 1,9 млн
ЭtО LADA NIVA VIS | #ТаКоЙоБзОр
0:22
Просмотров 903 тыс.
Mustang Shelby GT500: The Ultimate Muscle Car
0:14
Просмотров 11 млн