SNAKE PLANT PROPAGATION ONE YEAR UPDATE |How To Make More Sansevieria For Free! Everything Plants Amazon Shop Canada Amazon www.amazon.ca/shop/everything... USA Amazon www.amazon.com/shop/everythin...
One tip : If you're going to cut propagate any plant that's due for a watering, water it and wait 24 hours before starting your propagation. It helps you to start with a healthier and better hydrated plant/cutting. Healthier cutting means a better chance of success and quality growth
I bought a plant arrangement last year that had a sans in it. I separated all the plants and put it in it's own pot. It sits on my south facing window and I just forgot ab out it. When I finally looked at it again, it had grown a whole separate plant right next to its self. I never cared for these plants until I got this one and it was so determined to grow. Now I love that little plant. As for too may plant projects, I keep a plant journal when I do all this type of stuff. I am not always good at remembering to keep it up, but when I do I really love it. I can't remember much these days do I have to write every thing down.
I'm glad you mentioned the importance of keeping the cuttings facing upright! I saw a different snake plant prop video that just mixed them all up and didn't pay attention to that, then wondered why half the cuttings didn't root lol. Also, in my experience, putting the cuttings directly into soil caused quicker/taller new growth than starting them in water :)
A lot of posts say snake plants loose their variegation if you propagate from leaves. I’m not an expert but I think the issue is giving the plant enough light when the new leaves are forming. I put my Sansevierias outside in the sun in the beginning of summer and all the new leaves have more variegation than the mother plant. This goes for each variety I have.
I love how you take the time to go through and show the method without taking too long to get to the point. Others talk a lot and show no process! I have recently done this with my sansevieria as the leaves got overwatered and went mushy, I was able to save the tops of them and the main rhizome. Hoping it will grow back and the leaves will be okay. Have done in soil as too afraid to water prop due to overwatering the last time.
Thank you so much Jeff, I really really enjoyed watching you create all these amazing snake plants, from leaf cuttings. I’ve haven’t had much success with water propagating they just seem to rot. So I’ve got another leaf which I’m going to try to grow into new plants, in soil this time. Please stay safe and well too xxxx Mags ❤❤❤❤
More heat + light equals more Roots much much faster! Definitely do divisions if you want to keep any special pattern. Leaf cuttings in my experience even with moonshine always revert, but I have gotten some interesting little sport deviations. Works as well for other species like cylindrica. Cylindrical Leaf cuttings will come out looking flat but eventually develop their round form. Fellow plant mad scientist here with lots of sansevieria / dracaena species! I always enjoy your videos
Thanks for the info! These cuttings were on my plant table near the south window so plenty of sun for these guys. I assumed these cuttings would revert back to the original genetics of the plant when propagate by the leaf method.
I have a small snake plant that I bought at the grocery store last summer. All summer I don't think it grew at all, at least I didn't notice it. About a month ago I decided to separate that plant into two and I didn't know there was a giant white root thing in the middle and I snapped it in half. I was convinced I killed it. So I potted each plant into separate pots and was amazed to find a couple weeks ago that each plant is putting out new shoots. The mother plant has three separate new shoots and the one I took from it has one new one. The weirdest part is that they are in the lowest light ever because I don't have a lot of space to put them so they've both been sitting on the kitchen counter getting minimal actual sun light.
This is a perfect example of just because you are seeing growth that nothing is happening. I usually tell people the growth is probably happening in the soil! Thanks Cara!
Still at it, two-and-a-bit months later, some cuttings have dried up (turned brown) and some are still showing signs of life (still green). However, there aren’t any sprouts yet.
I just took one of my props out of water ….it had lots of roots so I separated it from the original leaf and put it in a tiny pot. We’ll see how it goes, but I didn’t want to pot it up with the cut leaf either. I am beginning to appreciate snake plates I have a starfish and fernwood. Also the gasteria is a cool structural plant... love the thick chubby leaves. Nice video 💚🪴👍
Awesome video about plants that I love...maybe the v-notch at the bottom is a good way not to get mixed up on which way is the bottom of the cutting...I have also seen people who use a black marker to make a dot at the bottom edge too....Your plants are beautiful...hope to see mine get that big someday. Thanks for the great info!! 🥬
I learned from a House Plant book, after taking cuttings, place them in soil and you will see the new growth pop up on side. I don't remember if cutting part ever died off. TFS
I was at Home Depot one day and I found a single leaf in the garden center by itself, so I took it home and cut it up like you did and put them in soil and put the pot into a bag. I hope they start to grow roots in a few months.
Comments and questions!! I had a snake plant since maybe 2017 (I didn’t take an interest/effort in indoor gardening until maybe late 2019) and it was watered…. Maybe 4 times a year lol. The new growth looked very similar to yours, more tube like and not wide and flat. Is that due to poor growing conditions?? I chopped him all to bits about 3 months ago, ended up keeping approximately 30, 2”-15” cuttings rooted in water and just 4 that I stuck in some soil. I have NO pups or signs of pups on any of my well rooted water cuttings… BUT, 2 of the soil propped ones have a maybe 1” pup coming up, another has 2 pups simultaneously erupting (maybe a half inch). My mind is made up, I’m going to be transferring all my rooted cuttings into some nursery pots lol. First time here, really enjoyed your content and the information! Thank you
Ty for the video, I have never prop’d sansevieria. Your moonshine looks a bit green, if you put it in full sun it would make new leaves in a more moony colour. Mine is so sensitive that the lower parts of leaves that have light slightly blocked by the other leaves are green and the tops are silvery.
Echoing the comments made by testingtesting54321 about leaf cuttings resulting in the progeny not retaining the parental characteristics. I read that years ago in one of my houseplant books. One reason for this is most of the variegation is on the outer margins of the leaves, at least with Whitney and the golden-edged leaf cultivars, whereas the new plants form nearer to the central midrib, which lacks those mutations. So it's unlikely your new plants will show them. Now Moonshine, on the other hand, has the whole leaf distinctly colored and so your leaf cuttings from it *may* inherit the mutation. I will certainly be interested to see how they look in a future update!
Little confused? So many different opinions with water propagation? Do you have to let the cutting callous over before you put it in water? I understand to callous before putting in soil but in water so many videos saying best to put it in water straight away no callous is that correct?
About the Whitney cuttings - I've read somewhere that special cultivars like the Bantels sensation or the moonshine should be propagated via rhizome division instead of leaf cuttings to keep the special variegation. Doing it via cuttings can result in babies without the same properties. For instance moonshine cuttings can result in robusta babies instead of moonshines. Maybe that's what's happening with the Whitney babies looking like trifasciata?
Ya. This is exactly what I was referring talking about the variegation on the leaf cuttings. You are 100% correct in saying the best way to maintain the variegation is by rhizome division. Thanks for the comment plant friend!
I was thinking about propagating my snake plant via cuttings. Good to know that it only takes a year..ish to get it to the point where you can plant it in soil. 🤣 Thank you, great vid!
I believe that the " v " cut is so that you know that the "v" end goes downward. If you cut a leaf in a few pieces, then you don't have the pointed top to help you keep track.
I propagated a broken leaf from a snake plant that was in a pothos I bought. I used the Swedish plant guys method of making multiple cuttings from one leaf, I cut a slight V shape when I cut the leaf, makes keeping the bottom in the water easy.
I have a snake plant that has refused to grow (followed all the videos), yet out of nowhere, it's sprouting loads of new shoots (looks like 4 more new plants) that are growing rapidly from the soil. Is this normal????? The main plant hasn't grown an inch still
I have 4 cuttings I started totally in soil. I can tell they have rooted because when I tug on them they don’t give at all. There are no shoots as of yet but my question is how often should I water them? Should I saturate the soil and then let it dry completely? I think they are eventually going to give me a plant let but in the meantime I don’t want to water incorrectly and loose them.
What happens to the mother plant? I cut my snake plant’s one leaf, and nothing has regrown from where I cut it from. Should I be worried? Does it every grow back?
I tried propagating in water it never works 🤔 But when I did it in soil it works every time 🤩 Sansevieria fernwood took about 5 months 🤔 Thanks for sharing ❤️❤️❤️❤️❤️
I have 4 in soil right now, I had 5 but one rotted. I can tell the other 4 have rooted because they do not budge when I pull on them. They have not given me a plantlet yet, how often and how much do you water them when prop this way?
I thought you said to let them callus over before placing the cuttings in water? I saw you place the cuttings in water right after you cut them to size! 🤔 I don't understand the contradiction....
I wouldn't get too technical with it....letting them callous over minimizes rot. I have done both methods in the past with good outcomes, but for information purposes, most 'experts' say to let the end callous over. Hope this helps
All my plants are drowning!!! My whole house is flooding!! Please help a fellow planter in a desperate time of NEED ! They want 1200$ all together and i have zero!!! $StacieBarboza or @Stacie-Bowles Floods sucks!!!