SNAP-ON EPIQ TOOLBOX QUESTIONS ANSWERED

Подписаться 91 тыс.

Просмотров 46 тыс.

50% 1

SIGN UP FOR UPDATES ON THE NEW TOOLHEADZ CRATE SERVICE!!!
www.toolheadzcrate.com
Use code RUSTBELTMECHANIC at checkout for 5% off all turbos!
ryansdieselser...
NEW RUSTBELT SHIRT MERCH
www.teespring.com/rustbelt-mechanic
Instagram: rustbeltmechanic
The New vinyls are for sale over on my FB page here...
/ shop
Other Channels to Follow:
CAPTAIN RON: / @captainron1
Truck Master: / @truckmaster
JRC54: / 545454jrc
d
Duramax_Diesel: / @resurrecteddiesel
The Snapon Tool Review:
/ @thesnapontoolreview
Thanks to BAD ATTITUDE OFFROAD:
www.badattitud...
You can reach me at Therustbeltmechanic@gmail.com
Donations can go to : paypal.me/rustbeltmechanic
Mail can be sent to:
Rustbelt Mechanic
PO Box 715
Piqua OH 45356
Music by Envato, Audio Jungle, and youtube free music.
The Duramax:
7" BDS suspension lift spec'd out with...standard knuckles, upgraded fox shocks, dual steering stabilizers, rear drive shaft carrier spacer, Recoil Traction Bars.
Fuel Rampage wheels 22x12 -44 offset
Nitto Ridgegrapplers 37x13.5
2" Rear wheel spacers
MBRP 4" exhaust
Raptor Bedliner Paint job
7" Custom Exhaust tip by DCS Custom Fab
Rugged Ridge Rear Inner Fender Liners
All LED lighting
PPE Stage 3 Tie Rod Ends
PPE 2" up pipes
ProFab Performance Manifolds
XDP EGR Delete
XDP Intake heater Grid delete
Custom EFI Live Tuning
Transgo Jr. Shift Kit
Airdog 2 4G 165 Lift Pump
Deviant Race Parts Fuel Sump Kit
PPE Race Fuel Valve
Ryans Diesel Service 68mm Race Series Turbo (OLD)
Comp cams valve springs and retainers
ARP Head Studs
60 over injectors with Bosch nozzles by Bitterroot Diesel Porformance
PPE Dual Fueler Pump setup
HSP full intake and piping bundle kit
Custom oil catch can
Build Transfer case by Kodiak Trucks
One piece L5P driveshaft conversion
OPT7 rear tailgate light bar
Boost Auto Parts Switchback tow mirror upgrades
HSP compound turbo kit w/ billet wheel S475/1.15
Ryans Diesel Service 64/66 High flow vanes turbo

Опубликовано:

4 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 239

@duramaxcountryboy2107 5 лет назад

Love that comment it’s my money and I’ll do what I want with it 👍 you worked for you earned it

@bsmithshoes9120 5 лет назад

I would never spend 35k on a box... but 5k that’s a great deal can’t complain about that at all

@turboflush 5 лет назад

I would consider trading for a deal like that also. If it were flat out 35k.. I could not do. Goes to show.. start small and work your way up. Stay away from credit as much as possible. Toolbox is important. You interface with it all day long when at work. If it's packed full and you can't find things.. then it will just slow you down. Doesn't mean it wouldn't hurt to clean it out once in awhile.. sell off things not used.

@jb_bmwrepairlyfe4704 4 года назад

5k for all that is a total steal! You can’t even get a used epiq box by itself without the hutch and lockers for that price!

@Jason607 5 лет назад

When you spend more time with something than you do anything else, working out of it day in day out, some of the little things become bigger than you might think and can make a difference. Those who are really in this know, those who don't if you stick around you'll understand.

@hyderyan27 5 лет назад

I have the 68" epiq and i wouldnt trade it for anything but an 84" love the eipq line.

@andrewdixon3552 2 года назад

Love your box just ordered my 8/4epic +two cabinets can't wait for it to arrive I started the trade in 1979 with a cantilever tool box buying a socket at a time.

@RedemptionGarage 5 лет назад

It's definitely a sweet set up brother and that is an awesome deal!

@hwi7114 5 лет назад

I feel like that series should come with lighting built in for how much they cost.

@nickquinn6984 2 года назад

Approaching my 3 year mark as an apprentice, been at the same shop the entire time. They had a big old roll down front lockable fireproof cabinet they weren't really using. They said I could use it to put my tools in, I filled it until I literally couldn't fit anything else in it. I just bought my first toolbox, a 54 inch Snap-on master series with power drawer and speedrawer, it's cranberry with black trim. Part number is KMP1022ABCR....I absolutely love it.

@TheCarDetailingChannel 4 года назад

One of the nicest tool boxes I've ever seen

@macneil6999 5 лет назад

I upgraded over time from Snap-ons heritage services buying them second hand 26” to 40” then trading in my 40” to a 55” classic with power drawer. Love this box.

@garryhardcastle5984 5 лет назад

I have to say I love your setup I probably would have gone with red trim . As for my first box I have to chuckle mine was a box supplied to me by the Royal Canadian Air Force 26 inches long 12 inches high and 8 inches deep filled with a variety of brands of tools 1/2 inch drive no 3/8 drive no 1/4 drive . We had it hard back then that was in 1963 when I got out I had managed to buy a few Snap-on and it ballooned from there. That was in 74 . I was forced into retirement in 2013 by sickness which left me with bad hands and feet . I still do a little wrenching but just for a few friends and myself . Good for you man and please keep up the videos love them

@johnn2557 5 лет назад

Great job on your videos! I'm still using my 1980 Snap on KR537A & KR557B 60th anniversary edition. It has a KR547 3 drawer mid section and two end cabinets, 1 KR274, and KR278. At the time this was concidered a monster of a tool box, but not so much today! I still love the Old School Snap-ON Script logo.

@leemyers4487 5 лет назад

badass box...I am currently taking classes at sinclair but for Aviation! I build hot rods in my spare time, this video gave me some great ideas for the house box and organization. Keep up the great videos!

@e-triggermechanic9228 4 года назад

EtriggerDIYr here. I started out with a 3 1/2 ft tall Stanley from Walmart when I started in the industry. I was new to the professional automatic world and that's what I could afford at the time and it also came with a 180 PC socket set that I actually still use to this day 10 years later

@jasonn2284 4 года назад

nice! where do you work and what does the pay you? Some dealerships have a hard time finding techs today they buy you tool boxes.

@e-triggermechanic9228 4 года назад

@@jasonn2284 I m not longer a professional mechanic at the moment. Im a welder by trade

@e-triggermechanic9228 4 года назад

@@jasonn2284 and I've since then upgraded my tool box lol

@jasonn2284 4 года назад

E-Trigger Mechanic congrats on the new upgraded box! Happy safe welding and make sure to cover your neck while welding. Welding flash is known to cause throat cancer. ✌🏼

@e-triggermechanic9228 4 года назад

@@jasonn2284 yes it does

@WA-zl6ju 5 лет назад

Very nice. Awesome negotiating and total agree it's your money

@jaydiesch2970 5 лет назад

I'm updating my classic to a 68 epic. Looking to add on later. The best advice that anyone can give is to not jump in on a big setup. I've been a heavy duty mechanic for 7 year. Stated out with a cart worked my way up.

@Jursaw 5 лет назад

Jay Diesch You won’t regret upgrading to the 68”

@hilltopmachineworks2131 5 лет назад

Good choice. I love my 68" Epiq.

@EragonElda777 4 года назад

My first box was a small Craftsman toolbox that I quickly outgrew. I then purchased, and still have, my 68" Epiq toolbox with bedliner top. I freaking love the Epiq series boxes, and yours is like the nicest I've ever seen. Someday I hope to have a similar setup, depending on how my financial and occupational future goes.

@mt1885 5 лет назад

Beyond awesome setup, Snap-On is the best followed up by Matco/MAC very close. People are just jealous the ones who got a bucket-o-tools for $9.99 would love to have your boxes. Jealousy is best form of flattery. 👍👍👍

@callumyocius2958 5 лет назад

I think Snap On is great, but for ratchets I dont think you can beat Matco. I know a lot of people who have rebuilt their Snap On ratchets 3 or more times when people who use their Matcos just as much are still on the same internals.

@phillipsmith5013 5 лет назад

I started with a classic 96. Then the large top box with the opening top lid. Then the side cabinet. All in steps.

@andrewduff4719 4 года назад

For 5K I would have said order it in a heartbeat! I have a 3 bay 6s and I keep looking at these epics !

@trangia12 3 года назад

Love the box and when it makes you happy, go for it.

@mikespillane1838 5 лет назад

I love that box,my career was one that was as a mobile tech in the telecommunications industry and I could never have a big box.

@ryanhager7985 5 лет назад

I love that you stress don’t go in dept over a big box. Great tip! I love your box! If it was mine I’d love it more. Keep up with the videos

@dcyamahatech 5 лет назад

Beautiful box. It's so hard to understand people's obsessions on how they think others should spend money. I started out with a basic craftsman and as years went on I bought kobalt boxes. A few months ago I bought my first snap-on box. Dont regret it one bit and as you stated already you wont pay anywhere near retail if you have a good rep. Mine is a 72in kcp1423 storm grey/black trim

@mt1885 5 лет назад

Others are just jealous (if they had the money they would have it).

@dafirnz 5 лет назад

I always just compare nice toolboxes to nice cars. If you drive more than a simple hatchback, you probably bought more car than you need and wasted your money too. And as much as I'm not a fan of expensive cars, they are definitely better built than econoboxes.

@mt1885 5 лет назад

@@dafirnz Nothing like stepping over a $100 bill to pick up a nickel. I am not driving a 'tin can' to be crushed in it. I don't care about cars they are all junk front drive money pits that eat up tires. Been around enough guys who claim to save money, they always try to cheap out and it cost them 5 times in the end. No thanks.

@jaymechanic1228 2 года назад

Next year my goal is an 84inch epiq in tiel /black trim. With stainless top. Will be my pride and joy .

@steemo1385 4 года назад

Being organized is key no matter the size of the tool box. You have an awesome setup sir and look professional

@vendetta989 5 лет назад

Nice setup, it showed you put a lot of thought into it. Thank you for the video.

@410AutoTech 5 лет назад

Beautiful box and congratulations on paying it off!!

@jaywolfe8068 5 лет назад

Love your box setup rusty. I'm all Matco, but love seeing these kind of vids. Keep them coming man!

@screamingflat6 2 года назад

I am jealous for the box!!!

@t.l.robinson2162 3 года назад

I love your toolbox combo. I'm glad that you could afford it.

@richardedwin5980 3 года назад

I'm an HD tech and working towards my master tech cert. I started off with a Craftsman 41", 14 drawer, 25" deep tool box, black with metallic candy apple red trim. The top drawer on the bottom box is a large, 6" deep drawer that is 41" wide by 25" deep. I use that as my socket drawer. After filling that up I was able to snatch up the matching 65", 13 drawer tool station before Sears went out of business. That's pretty much filled too. Both have the ball bearing & soft close slides. Respectively I spent about $1600 for both boxes after all the clearance discounts. Right now it's filled with about 50% Snap-On tools and the rest are Gearwrench, USA Craftsman and Tekton wrenches and tools. There's also a slew of Harley specialty tools. The 65" box came with a butcher block top but I had a stainless steel cap made for it. Used construction adhesive to secure it. You'd never know it wasn't factory installed. Solid, heavy duty 6" casters with grease fittings. 2yrs old and flawless condition. Not a mark on it. I'm debt free as far as the tools and boxes go. A Snappy box is in my near future. Just not sure what to get. I'm an OCD orderly freak so I' gotta have plenty of room. Hey, it be Craftsman for now but it's all US Craftsman and works for me as of now. But bigger is on the way.

@dafirnz 5 лет назад

Toolboxes, at least around here, hold a lot of their value for the most part. I went through a handful of boxes before I ended up with the one I have now and never took much of hit when I sold the previous ones. I never put stickers on them and put a bit of effort into posting them for sale, like cleaning and taking good pictures. The last box I got, which will likely be my last since I'm not in the business anymore, is a Mac Tech Series cabinet. I'm not a fan of the colour, but the price was good enough for me not to care. I could still turn around and sell it for about what I paid for it used 6 years ago. Depending on how fast I wanted to sell it of course. I had told my tool truck guy what I was looking for and about how much I wanted to commit. He ended up taking the Mac I bought on trade and took my old one on trade, so he undoubtedly turned around and sold that one too. The guy that bought the new box was likely happy, I was happy, whomever got my old one was probably happy and the tool truck guy got to sell 4 toolboxes. Fuck him if that didn't make him happy.

@brisketprofit3205 5 лет назад

Killer deal on the Snap-on box. Good job using credit/financing to your advantage. If you’re struggling paycheck to paycheck and have a Snap-on box on credit, you bought too much toolbox. Hopefully some younger techs see this video.

@Jursaw 5 лет назад

I have a Epiq 68” I paid $2,500 for and I can’t imagine buying one brand new! Price is insane

@hilltopmachineworks2131 5 лет назад

I have a 68" Epiq also. My dealer gave me a screaming deal because I paid cash for it. Also took in my old box that was paid off so I made out really good.

@Jursaw 5 лет назад

Hill Top Machine Works cash is king with Snap on dealers

@patsmith1783 3 года назад

I started out with a cheap 3 drawer craftsman and all craftsman tools as a Forklift road tech covering 150 mile radius . I then up graded to a cheap Homak or something like that lol . Being a road tech it tore the hell out of that box and i would braze it back together with brass . I then up graded to a old Snap-on classic top and bottom when i started working stationary in a shop . I dont even remember what size it was . Then i switched jobs and traded that box in on a 60 something inch purple master series box that was repo'd but was like new and i gave 3,500 for that box . I worked out of that box for around 13years in Oklahoma, then hauled it all the way to Alaska and worked out of it for another 6 years . Last year i traded that box in for $5,500 , and got a used like new 68" 60th Anniversary Teal Blue Bel-Air edition box with a Top Hutch for only 5,000 more . I love the Epic Series and Fixing to order the Side Cabinet with Matching trim tomorrow!!!

@noclass2gun342 2 года назад

I started with a 44" us general and I finally upgraded to a 68" epic series box today thanks to the rockin roll cab express

@Toyotas_n__Tools 5 лет назад

Sweet new intro! The old one was good but when you watch every video its nice to see something new =)

@RustbeltMechanic 5 лет назад

Yeah I figured it was time👍🏻

@kjbadass 5 лет назад

Hello again Rust Belt mechanic thank you so much for this video I see that all the time I did find another video that you did what a new mechanic should have in his toolbox thank you for that one also. You made a decision for me the first tool box that I'll get it when I get into the industry is a rolling cart. Thank you for all your time and thank you for all the hard effort that you put into all your videos I really respect the fact that you do know foul language no cussing

@RustbeltMechanic 5 лет назад

Thanks man, I appreciate the support

@johnnyk617 4 года назад

I kinda miss the master series slide locks...but in all honesty the latch lock on the epiq is very secure and feels great when it closes

@thomasfedrich9116 5 лет назад

Since I was a kid I worked for a construction company where my dad worked too and between my dads tools and the company tools I never bought any of my own. After almost 25 years i left and went to work for Penske as a diesel tech in another state. I borrowed a box and a few tools from my friend who already worked there and started buying all my own stuff. Now a little over a year later I have a 72" masterforce box and it's almost full. A lot of gearwrench tools, texton impact sockets, Milwaukee battery powered tools and some snapon screwdrivers and rachets. I will be buying a top box soon.

@MrSkyjacker07 5 лет назад

Love the epiq boxes, I just recently upgraded to an epiq 68” with the power drawer and love it.

@jlc9979 5 лет назад

Good for you bro nice deal. I’m a DIY guy and can’t afford a Snap-On ratchet so it’s Harbor Freight for me lol. F everyone else, if you like it and it’s your $ that’s all that matters. Enjoy the vids and Thanks

@wyomingtechnician6447 2 года назад

Well im a new tech and I love watching your videos they help alot and I've settled on the 5 drawer service cart from harbor freight to start with plan on getting a better tool box in the future but that is what I'm starting with

@wyomingtechnician6447 2 года назад

I'm actually super excited to start my first tech job next week

@screamingflat6 2 года назад

That box is fucking sick!!!

@pedaltheglobe419 8 месяцев назад

Do you find the flat black collects dirt and debris and harder to clean than the gloss colors?

@mattschafer8838 2 года назад

I just picked up a 84" epiq as well , and I cannot find a 26" roku tv for the life of me. lol it does fit perfect in your box, Should I go with a 24" tv or a 32" tv ? lol

@kyhomegarage3430 5 лет назад

Beautiful set up sir. Absolutely stunning box. As you said your money it’s up to you how to spend it.👍

@robertphillips3999 5 лет назад

That's an awesome deal you got on your boxes set up.

@bostdell 4 года назад

i love the big tool box's but most are bigger than my workshop :(

@richardedwin5980 5 лет назад

I started as an HD tech with a Craftsman 42" 14 drawer rolling toolbox with ball bearing soft close drawers and a matching 65" 13 drawer rolling tool bench both in gloss black with metallic red handles. Started with mostly USA made Craftsman, Gearwrench, Tekton and some Carlisle tools. Still have the boxes in near perfect condition cuz I'm OCD about cleanliness and have them filled with about 75% Snap-On tools. Looking to make the jump in the near future to a Snappy box. Boxes have never failed me. Only upgrade I made was covering the wooden surface on the 65" bench with a fitted stainless steel cap that I had rhino lined. Everything I own tool wise is paid off 100%.

@RustbeltMechanic 5 лет назад

That’s the way to do things!

@richardedwin5980 5 лет назад

Rustbelt Mechanic wondering if my snap on rep will give me anything on trade for a new Snap-On box. They are gorgeous big boxes in perfect condition. Not one single scratch or dent. Professional series. Drawers function perfectly. Have put aside about $10K as a down payment. Looking at maybe an Epiq. Any suggestion on size recommendation? Mine are both 22" deep now and I'm about out of space. If they had been 30" deep I'd keep em.

@brandanseago5202 5 лет назад

Its your money. I like the box. I wish I had room for a box like that!

@AntonioClaudioMichael 5 лет назад

Little over 5 thousand dollers is a steal over the original 35 thousand doller price

@rianvoight8771 5 лет назад

I’m 17 and worked for for for 3 months and have a 15 drawer craftsman box

@NemudusM 5 лет назад

If you're passionate about it, you will have a great time and be able to upgrade and have a awesome life. Remember that everything was put together and nothing was born in place (when we talk about cars/trucks), so it can be done and it can be done by you, if we can do It " you can do it" says Eric O. Try very hard to go to school and learn all you can about engine performance and EV, you are at the perfect age young friend. Good luck $$$big-money$$$

@1971anaconda 4 года назад

Love Snapon Boxes I started with a white box and built that up now that’s my home toolbox centre and I live out of my Snapon and extra box I built at work

@foodskewed9197 5 лет назад

I love the epiq tool boxes. I have the 2 drawer original epiq roll cart. I need to upgrade to the 5 drawer. I love the stainless top and it has a lot of room to put my tools and such. I hate flip or slide top carts.

@Freakingstang 5 лет назад

Cliff Hawthorne they make an add on third drawer. I have one. And the newer kemw361 epic workstation

@rflbotello 3 года назад

I liked you saying buddy. its your freaking money you can spend in all you want.👌👍

@AntonioClaudioMichael 5 лет назад

You have the same convertable samsung wireless charger I have on my toolbox kyle

@gato8695 3 года назад

That is one awesome tool box , I'm 35 and just started in the industry in Australia. Bought myself a sp sumo 407pc kit .

@RustbeltMechanic 3 года назад

The new SP Sumos are pretty awesome too!

@gato8695 3 года назад

@@RustbeltMechanic definitely are , I'm more than happy with it for starters

@bernardsimmons9888 5 лет назад

Love my epic just ordered the hutch and right side cabinet snap on always giving good incentives on boxes. I am in the process of building a shop when I purchase my home soon going to complete my shop perfectly. Cool set up man .

@danviper26 4 года назад

Love the box I have a Matco 4s with top draw and hatch Silver vein color paid off too there are a lot of haters out there keep doing what makes you happy

@DevilleHtwn 2 года назад

whats the part number for the LED lights in the locker?

@danohstoolbox 5 лет назад

Great video brother keep up the good work

@Bearshuta 5 лет назад

5K for that tool box is a steal, very nice setup and especially with the deal you got, you would of been a sucker to not have jumped on that deal!

@jynxproof2290 5 лет назад

Well I’m sure that RU-vid money’s makes it easier personally but I’m a power chaser. I put my money into custom parts or upgrades on my vehicles. Glad you enjoy that box it’s beautiful bud.

@Toyotas_n__Tools 5 лет назад

Heck yeah man that's awesome, you literally only paid $5000 to upgrade to a bigger box and gain a epic cart! You know what I will say this about having a nice tool box and it not making the tech, I actually believe that it does! Like for myself being able to have a toolbox that is nice and big gave me a peace in my mind and confidence that Im not being limited to what tools I can have because of the storage situation. I'm now able to do and accomplish things I never thought I would before because I have the tools to do it and a place to put them.

@terryeffinp 13 дней назад

It is crazy how much the prices have gone up in the past couple of years, I am about to pull the trigger on an 84" Epiq with a stainless power top, hutch, and a locker with a power drawer. I am looking at 12k out of pocket trading in my almost 9 year old KRL1033 with a hutch and locker. To be fair 3k of that is paint, sapphire blue is a special paint option, but it is a color choice that most people do not have. My current box is flat black, I will never buy a flat paint box again. It is impossible to keep clean in my shop. To be honest I know it is not a great deal, but Snap-on has discontinued my locker, and they discontinued the upper drawer sections for the master series boxes, so unless I am lucky enough to find someone trying to off load a LH master series locker in flat black, or an upper drawer section in flat black, or if I can accept the new locker being 6 inches taller than my hutch (which I can't), the only way to go is to move on to an Epiq for more space.

@robertdyer2442 4 года назад

I started with a green classic 55 thru snapon mopar cap 1500 used it for roughly yr and half out grew it and bought a used matco s4 which came with hutch and got 2500 for my trade in. Now I'm just adding two more drawers and side locker. Would love to get a epiq but would have to sleep in hutch because wife is tired of payments lol

@dylandumont7046 4 года назад

sweet box man would get one if i could too

@tommydoepel6580 3 года назад

5 grand for that box is a crazy steal! unreal.

@larryl2682 5 лет назад

I currently own a 55” classic box and a HF roll cart and it’s the right amount of space

@stroked6327 4 года назад

I just ordered a 84 epic with hutch and side locker. Traded my 4 year old matco 6s off for it. This would be my 5th tool box since 2003

@BarrySkipp 5 лет назад

When cleaning my flat black epiq I use dawn dish soap and water in a spray bottle then wipe and clean with a microfiber. Takes all the dirt and grease off in seconds

@RustbeltMechanic 5 лет назад

That sounds like a pretty good tip, gonna have to try it👍🏻

@BarrySkipp 5 лет назад

I started with a simple Harbor Freight 44 in box, later I added a top drawer set.. traded that in towards a Snapon classic 72.. and recently traded THAT in towards my Epiq 84 in Flat Black with Atomic Green trim

@Reggiestopmotion 5 лет назад

I started with a small top box that has 2 draws in it (dont think I'd get my screwdrivers in it now) went to a Clark tool box after that then a snapon heritage series. Would love toget an epiq but my dealer supplies the toolboxes now. They not very big and am trying to piss the boss off enough that he takes them out. Think I'd go for a similar set up. Love the colour

@Reggiestopmotion 5 лет назад

And at 35k it's worth every penny, I had my snap on box for 8 years and lost next to nothing on it, they do hold money. And are fantastic boxes.

@AntonioClaudioMichael 5 лет назад

The epiq series black with the green chrome trim is so beautiful love the blue as weel

@AntonioClaudioMichael 5 лет назад

Good questions and answers

@zannusx 5 лет назад

Wow that is an amazing deal you got. I currently have a 73" classic and await the day I can afford an 84" epiq.

@AntonioClaudioMichael 5 лет назад

When I started in the industry I started of with a 44 inch craftsman double bank

@OneMechanic 5 лет назад

Good video! Loved what you said about your box and it's your money do what you want. I think it's funny how people rant on people with nice boxes.... maybe it jealously... lol. I also would suggest that a new tech doesn't need a fancy box when starting out... Peace out !!

@romarazumovsky9002 5 лет назад

Harbor freight been stepping up their game tho

@will0413 5 лет назад

i love the 3 deep top drawers. masters or epiq

@OUSWKR 5 лет назад

For what you paid out of pocket for that box it would be a no brainer. I would do that too if I had that offer placed in front of me. That’s a sweet box.

@svenstrahl9714 4 года назад

Love it man, good on you. I started with a Heritage series 40, paid that off then went with a Matco 4s, which i absolutely hated haha. Got rid of that and now have a Masters series KTL1022, with workcenter and locker. Today i just ordered my Epiq 84 with workcenter, power top with led light that lights up the drawer. They gave me 18k for my Masters, I'm in about 6k for my new Epiq. I'm excited to get it. I'll add some lockers later. Absolutely it doesn't make a better technician. But i can afford it, and i like nice things. I'm a professional, and want a professional toolbox. A Epiq 84 is just that. Love that computer setup too. I run something similar, except my monitor is a 32 Vizio smart TV with a cheap wall mount from Wal Mart. My Epiq will get a 43 inch TV, maybe. I might go two 32s side by side. I'm mainly driveability and body electrical, so i need that big screen for wiring diagrams.

@AntonioClaudioMichael 5 лет назад

Great video kyle

@mt1885 5 лет назад

LIKE to see more in the EPIC and organization.

@devinpinkerton2973 4 года назад

I love that box I want one like that I started off with a 4 drawer us General with snap on tools now I have a 56 inch 11 drawer us General I also used used my Snap-on sep discount but only for tools

@DR440 5 лет назад

That is way more box than I can afford but maybe one day I'll get a better box. That is a very nice setup and you got one hell of a deal on it. All these hate comments are foolish because nobody handed you that box, you earned it! So many salty people out there concerned with what others spend their money on. It's your dollar till you spend it@

@TheShanesousley 4 года назад

This setup is absolutely bad ass. Doing the upgrade for 5k is a sweet deal. As I am very jealous I also am trying to stay in my lane with a used master series double bank for now. Do you think adding lockers and a top would he worth it for a used box?

@RustbeltMechanic 4 года назад

Oh yes definitely, or a power drawer. Check out my master series box before I got my Epiq, I loved it.

@martinschaffmeir7729 5 лет назад

Hello sir it is a very nice box and very inexpensive

@sbkarmen 5 лет назад

Snap on makes a monitor mount for your hutch...

@RustbeltMechanic 5 лет назад

They sure do....but not for $1.25😁👍🏻

@sbkarmen 5 лет назад

Rustbelt Mechanic lmao $125 whoopdy doo!! Lmao!! Chump change!

@beilno2890 4 года назад

What is the part number on the rollcart?

@justinvitale5764 5 лет назад

Idk, I have a snap on master 72 inch series and I love the stupid thing with my roll cart. Your tool box is awesome, wish I had something like that, but I dont think I could let go of my masters

@scottcook7201 4 года назад

i have the 84" epiq with hutch and left side locker with led power top in storm grey and black. absolutely love the box and i get the same comments on my box, why would you buy that, blah blah. sick tool box brother

@hhattingh 3 года назад

Dumb question but what is the difference/differences between Epiq and Master's?

@RustbeltMechanic 3 года назад

Lots of differences. Size, design, depth, handles etc...

@WBOS72 5 лет назад

I love your EPIQ Kyle - but I’d swap blue for Orange.

@charlescasseday7445 5 лет назад

Habor fright Sevice cart and gear wrench and impact

@jasonn2284 4 года назад

Congrats on the epiq tool box! FUCK the Haters! one life to live! Usually a person with a box like that is doing well in his career!

@jasonn2284 4 года назад

Here’s my take and a little about my story. I find the haters usually low self esteem mechanics that get paid like shit, their life sucks, and are miserable. Those are the dudes making others feel bad because they have a toxic negative energy. I’m a HD mechanic and I make $105,000 a year USD working at Kenworth Dealership. It’s a union shop straight time at $47.00 an hour. Anyone who says bullshit I will send you my Paystub or T4 no over time. I quit being a car mechanic because shops were undercutting techs with BS times and shitty warranty times. They were paying flat rate at $28.00 or straight time at $32.00. Their was no winning. I was a car mechanic for 7 years at small shops and at the biggest Mercedes dealership there was. At best I made $28.00 an hr. Never doing cars again but hey if you are dedicated and if it makes you happy be what ever you like and buy what ever you like. Seen too many deaths and negativity in life! ✌🏼 ❤️ My next box will be an 68” Epiq

@danlevesque5437 5 лет назад

I'm still waiting for a master carpenter to build a equivalent of these toolboxes how sweet would that be in the background

@RustbeltMechanic 5 лет назад

That would be a pretty great thing to see!

@doctorhelicopter 3 года назад

Ive never understood roll cabs. This is on wheels? why?

@cardo1111 5 лет назад

Good vid, I assume you told Snap-On they will get a lot of exposure through your channel to help negotiate such a deal. Very nice box, the blue trim makes all the difference, best of luck with it!

@RustbeltMechanic 5 лет назад

Nope, at this point and then I have never been any affiliate or made any deals with Snap-on for RU-vid videos

@cardo1111 5 лет назад

Rustbelt Mechanic Understood. Appreciate the response.