No video :(

Soft Jaws for Lathe Chucks

Mike Peace Woodturning

Подписаться 58 тыс.

Просмотров 13 тыс.

50% 1

Видео Поделиться Скачать Добавить в

Many scroll chuck manufacturers offer Soft chuck jaw blanks of nylon that allow you to create custom jaws easily to suit your specific needs. These soft jaws for lathe chucks are great for that one-off chucking as well as repeat use for a specialty woodturning project.
I upload new wood turning videos regularly so Ya’ll come back, hear?
As an Amazon Associate I earn from qualifying purchases from my Amazon shop www.amazon.com....
You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website www.mikepeacewo...

Опубликовано:

29 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 66

@johnwallace4408 5 лет назад

Once again, you have given me something to think about! This is the answer to holding my products for finishing. SAFE TURNING, John

@MikePeaceWoodturning 5 лет назад

Good deal, John. Let me know how it works out.

@wb_finewoodworking 5 лет назад

That’s very interesting. While I’m not ready for something like this now I’m sure this video will come in handy someday when I get more experienced with the lathe.

@MikePeaceWoodturning 5 лет назад

Another view from you down the road would be good! Thanks for your support.

@tedspens 5 лет назад

Mike, I've been turning for a few years and never heard of soft jaws until now. Thanks for the great video!

@MikePeaceWoodturning 5 лет назад

Glad I introduced you to something new! Thanks for the feedback.

@MrPete1x 5 лет назад

Another informative, honest video. Thanks Mike.

@MikePeaceWoodturning 5 лет назад

Thank you, Peter.

@PHIL_S 5 лет назад

27 degrees here in CO today - but I went out and got my Nova soft jaws out so I can see what I might do with them - again thanks Mike for the vid and tip

@MikePeaceWoodturning 5 лет назад

Brrrrr! Good luck.

@glencrandall7051 5 лет назад

I have seen those jaws on the Nova display in the Rockler store but until now had no idea what they were for. Thanks for the update. It was very timely. I always look forward to your weekly submission. There is always something for me to use. Thanks again for sharing.

@MikePeaceWoodturning 5 лет назад

Thanks for watching, Glen.

@RickTurnsWoodturning 5 лет назад

Good video, Mike!

@MikePeaceWoodturning 5 лет назад

Thanks, Rick. Now when you come up with a project that would benefit from nylon jaws, you can pull yours out and go for it.

@pamhoven 5 лет назад

I’ve wondered what they would be used for, thank you!

@leftymcshea6876 3 года назад

Great video...been using jam chucks for years, didn't even know these were available....gotta get a set for my Nova....lotta possibilities! Many Thanks!

@MikePeaceWoodturning 3 года назад

Glad to help. Compare price for Record Power with Nova. They are interchangeable.

@leftymcshea6876 3 года назад

@@MikePeaceWoodturning Thanks Mike

@woodturningguru8857 5 лет назад

Great video Mike and jaw's for the job. Y.N.W.A.

@MikePeaceWoodturning 5 лет назад

Thanks. I appreciate the feedback.

@billybobfrank8635 5 лет назад

You are my favorite wood turning channel, keep it up!

@MikePeaceWoodturning 5 лет назад

Excellent! I always wanted to be number one at something, sometime, somewhere!

@DeathMetalMusic-SavedMe 7 месяцев назад

Nice answer, that's awesome 👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻 also don't forget your a 1 and only, here's another one for ya to add to your list. I've never commented on your videos till I saw this video, i had no idea what these jaws were for, so as another 1st is a, Thanks & G'day, Cheers 🍻🍻🍻🍻🍻🍻, Matt Maryborough Queensland Australia 🦜 🦘 🤠 🇦🇺 🦘🦘🦘🇦🇺 Enjoy these extra 1sts

@johnmeeks9618 5 лет назад

Thanks Mike, I didn't know those types of jaws even existed.

@TimRobertsonWoodturning 5 лет назад

As always; very nice video. Great tip on using the wood dowel. Thanks for all your videos.

@MikePeaceWoodturning 5 лет назад

I appreciate your comment, Tim.

@cortlandhunt4721 5 лет назад

Great idea! Great tips Mike. 👍🇺🇸

@MikePeaceWoodturning 5 лет назад

Thanks for commenting.

@billy19461 5 лет назад

Great video! I will be ordering a set before long and definitely will order them through your channel.

@MikePeaceWoodturning 5 лет назад

Thanks for your support!

@timhalcomb4041 5 лет назад

Appreciate you sharing thanks have a blessed day

@MikePeaceWoodturning 5 лет назад

And you as well.

@alanmullock381 5 лет назад

Always good tips Mike👍👍👍👍👍👍👍👍👍👍

@MikePeaceWoodturning 5 лет назад

Thanks, Alan!

@kenkay40 5 лет назад

Good info Mike, didn't know about these before. The jaws could be a good solution to some finishing issues.

@MikePeaceWoodturning 5 лет назад

Yes, I had some for years before I made this video. Still have not used them yet.

@danhealy7341 5 лет назад

Thanks for the video Mike. I could use these on some projects that I have in mind.

@MikePeaceWoodturning 5 лет назад

Great!. Happy you found it useful.

@csle1962 5 лет назад

Cool!

@deyyoung42 3 года назад

Just got some Record jaws on clearance at WoodCraft (search record-power-soft-jaw-62378). It's a great deal and I like that the Record jaws fit on my Nova chuck.

@MikePeaceWoodturning 3 года назад

Got to love a clearance buy!

@lylet100 5 лет назад

Thanks again for Tips and Tricks I must have a dozen of the soft jaw each with specialized cut. Nothing could be easier to turn the exact profile needed and they last forever Can you leave a link to where you purchased the two different jaws, I’ve only purchased the red set of jaws. Again thanks

@MikePeaceWoodturning 5 лет назад

The green ones are Record Power available wherever Record Power products are sold. You can find them in my Amazon shop by clicking on the link in the description of all of my videos.

@Ethan-pb3jq 11 месяцев назад

Looks like a good product to add to my arsenal. I just did a quick search and it seems they’re not available for Oneway.

@MikePeaceWoodturning 11 месяцев назад

I thought they had some but do not see them on the Oneway site. They do have some flat metal jaws designed to hold wooden jaws you make.

@diydarkmatter 5 лет назад

pretty cool . wonder if you could make these out of wood . i would not trust them with big bowls or any thing but i bet it would work great with little boxes and so on .

@MikePeaceWoodturning 5 лет назад

Yes, some turners do. I have not tried it yet but will one of these days. It is a lot more work.

@diydarkmatter 5 лет назад

@@MikePeaceWoodturning yeah i could see how it would be more work .

@monophoto1 5 лет назад

Mike - I have made a number of accessories from HDPE cutting boards that I buy at the dollar store. I'm inclined to think that you could make something similar from that kind of material. HDPE turns very easily although the waste is very 'stringy'

@PHIL_S 5 лет назад

acrylic turners would be right at home then - lol

@MikePeaceWoodturning 5 лет назад

Absolutely. If I see a dollar cutting board I may give it a try.

@Qwonk 5 лет назад

Nice one dad 😝

@MikePeaceWoodturning 5 лет назад

Thanks

@AllenMayles 5 лет назад

Hi Mike, good tips. I purchased a set of these for my Nova a while back but I haven't modded yet. Watching your video has given me the idea of putting a bit of a taper profile on the outside edge to use as a jam Chuck inside small bowls along with the tailstock to help remove tenons. I can use the inside to grip smaller spindles then my standard jaws. I am wondering the purpose of the dowel you used, you didn't go into detail on why beyond saying it set an eighth inch gap.

@MikePeaceWoodturning 5 лет назад

You want to have as close to a circle when closed as possible. But you want to be able to tighten a bit as well. The 1/8" gap gives you a bit of tightening room. I think you will be happy using it to reverse small bowls as you described.

@davidfriedman3962 2 года назад

I want to try making a live edge bowl, could they also be used as a jamb for live edge bowls? And if not do you have a recommendation to help hold small bowls to cut off a tenon? Thank you.

@MikePeaceWoodturning 2 года назад

Your best bet is the tradtional way of using a friction chuck on the inside with TS support and cut the tenon to a nub and saw off. Details here ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-CIqCQxWUkTk.html

@stevehood10 5 лет назад

Great video, as usual. Unrelated question, what is the purpose of that triangular casting with a hole at the apex bolted to the back of your feedstock?

@stevehood10 5 лет назад

Head stock, I typed in headstock evidently auto correct is being pedantic today!

@MikePeaceWoodturning 5 лет назад

It is designed to hold the safety cage. I did a video on this a while back.

@stevehood10 5 лет назад

Thanks Mike. Don't know how I missed that. I'm a fairly new turner, 2 years, and I find your help invaluable. I really appreciate the time and trouble you take. Thanks again.

@mikeb4555 3 года назад

do they make these for Oneway Stronghold chucks?

@MikePeaceWoodturning 3 года назад

I do not see any in the Craft Supplies catalogue but you might check with Oneway.

@johnfithian-franks8276 5 лет назад

Hi Mike, I don't know how much these plastic jaws are but unless they are very cheap (and I do not see that very often when buying lathe tools) why would you not just make some out of plywood or softwood?

@MikePeaceWoodturning 5 лет назад

We know that one size does not fit all. Some folks like making things and some don't. Why does anyone buy a tool handle for an unhandled tool when they can simply turn one? Some folks have a problem, real or perceived, and they are more than happy to purchase a solution. For production turners making a living turning, their time is probably worth more than the cost of the nylon jaws, so buying the jaws is an easy business decision. I am not recommending making or buying since that depends on so many individual factors including skills, $ value of time, and mostly what do you enjoy doing.

@johnfithian-franks8276 5 лет назад

@@MikePeaceWoodturning I hear what you are saying and agree, but the less nylon that will one day end up in landfill the better for me.

Далее

Woodturning Chucks, Jaws, Tenon's and Recesses

36:53

Woodturning Chucks, Jaws, Tenon's and Recesses

Просмотров 90 тыс.

Chuck Jaws for Woodturners

16:55

Chuck Jaws for Woodturners

Просмотров 16 тыс.

Useful gadget for styling hair 💖🤩

00:20

Useful gadget for styling hair 💖🤩

Просмотров 2,1 млн

УГАДАЙ КОНТЕЙНЕР - ЗАБЕРИ ТАЧКУ!

1:07:21

УГАДАЙ КОНТЕЙНЕР - ЗАБЕРИ ТАЧКУ!

Просмотров 2,5 млн

Reviewing the Improved Rust Map in the Reforged Update | Standoff 2, Season 8 (0.30.0)

01:20

Reviewing the Improved Rust Map in the Reforged Update | Standoff 2, Season 8 (0.30.0)

Просмотров 288 тыс.

Моя дикарка вышла в окно😫😱 вот такая я мать… не досмотрела. Не спрашивайте почему я с телефоном🙄

01:00

Моя дикарка вышла в окно😫😱 вот такая я мать… не досмотрела. Не спрашивайте почему я с телефоном🙄

Просмотров 1,1 млн

Simple Way Of Making Cole Jaws For My Lathe

19:14

Simple Way Of Making Cole Jaws For My Lathe

Просмотров 17 тыс.

Homemade Remounting Jaws (woodturning)

6:39

Homemade Remounting Jaws (woodturning)

Просмотров 91 тыс.

Making Copper Soft Jaws for the Four Jaw Chuck

7:45

Making Copper Soft Jaws for the Four Jaw Chuck

Просмотров 31 тыс.

DIY Adjustable Jam Chuck/Soft jaws

8:08

DIY Adjustable Jam Chuck/Soft jaws

Просмотров 15 тыс.

Nick Agar's Favourite Woodturning Jaws - Woodworking Wisdom

31:06

Nick Agar's Favourite Woodturning Jaws - Woodworking Wisdom

Просмотров 4,8 тыс.

Three Options For DIY Soft Jaws

9:01

Three Options For DIY Soft Jaws

Просмотров 8 тыс.

Wood Jaw Plates - Episode 207

11:33

Wood Jaw Plates - Episode 207

Просмотров 2,6 тыс.

Lathe Soft Jaws in 5 Minutes - You Need These

7:16

Lathe Soft Jaws in 5 Minutes - You Need These

Просмотров 35 тыс.

Richard Raffan using chucks without marking the wood.

8:23

Richard Raffan using chucks without marking the wood.

Просмотров 17 тыс.

Scroll Chuck Jaws 101 for Woodturning

23:17

Scroll Chuck Jaws 101 for Woodturning

Просмотров 29 тыс.

Useful gadget for styling hair 💖🤩

00:20

Useful gadget for styling hair 💖🤩

Просмотров 2,1 млн