Soils, Wastes and Copper Pipework | Day in the life of a plumber 

You are a really down to earth man, humble and caring about the job and appearance. Wish the world was full of people like you.😊

Should have told the tenant that he'd save more than that with a new, more efficient boiler. He should be grateful to the landlord that he got a new one fitted. Another good video Tom, thank you.

“Haven’t used a flexi because I’m a plumber” I like that Tom👍🏻! Nice content as per mate, have a good weekend mate.

OMG so good to see someone connecting a basin properly with tap connectors, only just had to bend ofsets for them.

Hi Tom, another great film there with some fantastic work as always. I also enjoy watching how different plumbers do the same job, it’s very interesting and I enjoy learning. Hope you have a good bank holiday weekend, as always take care, 🍻👍👍👍

Don’t be a genius Tom, just do your best 😊💪💪💪

Another great video pal. I never really read the comments tbh. But just been reading a few of the kind words you're follower have left you. And you've replied to all of them. What a kind hearted person you are weldone lad. Have a great bank holiday. Keep up the great work. 👍🏻

Another fantastic video Tom, great to see you soldering and resisting the use of flexi’s. Thanks for all the effort you put in your videos 👏👏👏👏

Another good one Tom, again very neat & tidy 👍🏻

Look forward to your videos tom. Top plumber love how you explain everything your doing

Nice one Tom, I always use JetBlue or any paste on my fibre washers too. I was always told it prevents it from sticking on the metal when undoing in the future. Yet to see if it is true but I know for sure they stick on when not pasted up lol

Good Video as always Tom, Your looking very relaxed and happy on this little job Good Man Tom, 👍👍🤜

Nice tidy job as usual Tom, hope you get a break over the weekend, keep them coming and take care 🚽👍

I used to watch the great Tom plumb 😊 lag the hot pipe so if somebody trips they don’t burn their hand 😂 what’s the world coming to. Good video mate.

Nice to see a basin hard piped for a change 👍👍

I was working on a refinery where you couldn’t have phones, calculators etc on site. My mate who is about 20 yrs younger than me was knackered adding up on paper because he was used to using a calculator all the time. Nice job.

really enjoyed that one great job, just use the bender more lol

Just catching up with you tube. Enjoyed this mini series. 👍

Brilliant video thanks tom very helpful tips

Top work again Tom

Another good one Tom,

Sweet little job fella. As always 😊

Good video Tom 👍

good video as always Tom.👍

Another nice tidy job

maybe take the cost of the gas into consideration next time Tom before pricing but then i know its only a few quid but some people really hard up because of this cost of living 🥰

Hold tight, throughout the night!

Should be fine cause I did it 😂 brilliant Tom ❤

Nice work there Tom.👍 I have some sympathy with the tenant - he is paying rent and the boiler including installing and commissioning of the boiler is the landlords responsibility, when you are brassic and eking out your food money every quid counts! On the toilet install (in the narrow room with the black soil pipe), would it not have been better to take out the skirting on the pan wall - getting the hole for the soil pipe closer to the back wall? (Just asking😉). I much prefer the hard tails on the sink taps too.😀👍

👍

Hi Tom. As you know the shipper has the facility to put emergency credit on token meters when we test. We had one guy in Gloucester who always reported a gas escape when he ran out of credit he thought he was getting free gas every time we called. Long story but one of the lads got chased down the road and had had pizza thrown at his windscreen when he refused to “wind” the gas on 😂😂

👍👍

“An ACS” & “are not up to scratch”. English & Maths are essential to the job. Good luck

Have a great bank holiday weekend 😁

i woulda done it slightly different luv the bender i do

🤘😎🤘

Great work ethic Tom 👍🏼 Looking at the basin waste trap 🧐 what was the thing you inserted after the rubber seal and before screwing trap onto pipe ???

Tom plumb . The lad from wigan ? Good old fashioned plumber . As honest as the day is long . On about tight customers I had one who said was I going to pay for the electricity I used charging my cordless batteries at their house . Any single tap should be piped in rigid , flexy pipes are useless . Nice job as usual Tom

Great video once again Tom is that a TMV connected to the basin pipe work never seen them used on basins before

I never actually knew what the blue insert bit was that comes with some traps, I’ve only every tosssed them in the bin. What purpose do they actually serve? Great Chanel keep it up 👊🏻

Hi Tom, new subscriber here, loving your work. Quick question for you, do you allways use a blending valve on you basin instals or is it just down to customer preference. One other thing, wereabouts are you based?

Left school no quals shit at long maths. Fuck maths I’ve got a calculator. Experience in your job is key.

Hi, What is the fitting sat below the sink the hot and cold water is passing through. What is its purpose? Thanks for the video.

Nice vid. What was the valve for on the feeds to the small basin?

do you always do a pilot hole before core drilling Tom ?

Nice job there Tom very good 👍👍👍. Don't forget those pipe clips on the sink pipes.. And nice of you to drill the hole for the extract fan . The electrician will love you 👍👍👍

Nice vid!!!! Also how are you?

is that a timber frame house Tom ?

great content but please slow down and explain clearer what you are doing

If you think that sink wasn't well cast, I had a bathstore toilet with a outlet shaped like a egg

37 layers of wood 😂

👍🏿👍🏿⚒️⚒️⚒️ I just had a maths and English assessment for a ACS course to be told that my maths and English is not up to scratch 😂😂😂 thinking 🖕🖕🖕 i'm here to train as a gas engineer not a mathematician or English teacher 🙄🙄🙄 FFS

Did you have instagram plz

Thanks as always for sharing, good content as usual. Good to get a mention for my mate TomPlumb👍👍 I was disappointed with no offsets on the tubes at the Basin & more elbows than Gazza in the Penalty Box!! Nice neat job nevertheless. Polypipe Traps are really poor, always McAlpine, made in Scotland from Girders!!! McAlpine don’t just have great Plumbing products, after doing maintenance work in a couple of their factories, they’re great people & treat their Staff really well👍👍 WC close couples doughnut washers, if they leak use Plumbers Mait both sides, never fails & you can still lift the Cistern off if required. Buy the new wee 15mm Monument Bender, it’s fabulous & fits inside your tool bag. Elbows take longer to fit, have two more joints & restrict the flow. Formed bends look more professional, don’t leak & don’t restrict the flow as much. Kind regards & luv Dick Puller. PS How about a mention for the most infamous Scottish Plumber.......ME!!!