Inverter Amazon link: amzn.to/351gWOb Inverter Ebay link: rover.ebay.com... As an Amazon Associate I earn from qualifying purchases. As an Aliexpress Associate I earn from qualifying purchases.
I have installed my plug and works perfect, but only reads power injected, the app is capable of monitoring also the house load consumption, but it is 0. Somebody know if this is possible to monitor with this plug.
HI, I have a SUN-1000GTIL2-WIFI and I couldn't set it up for the internet, always gives me offline. One question, is there software for Windows to view the data without going through the internet? if so which software? Thank you. Marco.
Non riesco a collegarmi, mi da : status offline, Ho fatto tutte le procedure ma rimane offline. Sul modulo wifi i led sono tutti accesi verde. Un aiuto grazie
Interesting video, question what is the maximum input current that the inverter can withstand, I read the manual but I couldn't find it, only the Watts and volts
1. you could try just extend wire and see if it works. 2. if #1 doesn't work properly, then you could add 2 more CT sensors in parallel so signal will be stronger. here is video about CT clamps: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-gek4x4sh9MA.html
dont buy this thing its very bad. you cant change the settings on it. the production is lower than other converters too. i bought solis inverter after this and it has much better output in lower sun light and has better build quality. dont compromise your budget on converters. the mppt tracking on this is just shit.
@@benkanobe7500 because i have a another product from a different brand that my utility recommends which is far far better than it. also i have been using it since 2017 and the mppt of this once is very poor compared to the other brand i use. even they dont allow user to set the parameters. every converter in our market allows the user to set parameters to meet utility needs. this one manufactured with substandard parts too. i actually bought 2 converts from this brand and both failed . first one by lighting, second one display failed for no reason. so i opened it and saw very poor parts being used.
show this thing to an electrical engineer who works for your power supplying company as a relaying engineer. ask him about the settings in this converter. he will tell you the flaws and how unsafe this is for you and your utility
just go to you countries guidelines on ongrid system. compare it will this one. they is no uniform data sheet available for this converter. they have multiple data sheets with corrected value. there are lot of parameters that needs to be set before commissioning and all those thongs are set as default in this converter. like upper and lower cut off freq, voltage, on times, generation starting times, and so on. in addition the the dc injection factor is also being faked they show multiple values in diff data sheets. they even change these values to you preference if you mail them. messing with the grid is not a childs play
@@afsallais9825 Thank you for your responses. They seem well thought out and intelligent. In all your postings about these inverters you continue to say this: "...even they dont allow user to set the parameters/settings" You will need to explain that as I don't think anyone knows what you are talking about. Battery cut-off is selectable, battery reconnect is selectable, amp limit or watt limit is selectable, no limit is selectable...... I have tested mine over and over. They disconnect from the grid in less than 30milliseconds if the grid goes down. I have never had mine output to the grid and they seem to keep a 4 to 10Watt safety margin. (I am in North American with a "Split phase" - two 120VAC and a Neutral). I hope I am explaining myself correctly. Maybe consider having a RU-vid channel and you can show all the greatness of your unit and compare and contrast between the two. Most people that purchase these know they are less than ideal as one would expect from China. They are improving with time as I use to run the even less expensive ones with no limiter and had to manually control the contribution to the load by turning breakers on and off. Right now you are perceived as a Troll because all you do in your posts is criticize these units with no recommendation. Clearly, you are very smart. Why not get on RU-vid and help others?
