SolidWorks Tutorial

Подписаться 339 тыс.

Просмотров 223 тыс.

50% 1

►Engine will be completed on :► • Project 10: V6 Engine
►Pocket MultiTool ALL: ► • Project 9: Pocket Mult...
►Tractor:► • Project7: Tractor
►For more SolidWorks Tutorials: ► • SolidWorks Practical T...
►CATIA Complete Learning:► • CATIA Complete Learni...
►Inventor Complete Learning:► • AutoDesk Inventor Comp...
►SolidWorks Surface Tutorials: ► • SolidWorks Surface Tut...
►Solidworks Sketch Tutorials: ► • SolidWorks SKETCH Tuto...
►SolidWorks Beginner Tutorials: ► • SolidWorks Complete Le...
►SolidWorks Weldment Tutorials:► • Playlist
►Available Playlists : ► / @sw-tcnet
►Learn Engineering Playlists:► / @tutorialsengineer
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
All dimensions are in mm/g/s/ISO - Based on true dimensioning!
---------------------------------------------------------------------------------------------
Rating, commenting, subscribing and sharing are always appreciated!!
----------------------------------------------------------------------------------------------
The uploaded tutorials are based on an accumulating studied plan!
----------------------------------------------------------------------------------------------
New to SolidWorks?! Recommended to watch my earlier uploads!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Hello & Welcome to SolidWorks Tutorial Channel
This channel is dealing with EVERYTHING about SolidWorks aims to make the viewer a professional SolidWorks user! & to be helpful !
This Channel contains topics about:
- SolidWorks Beginners Tutorials
- SolidWorks Sketching
- SolidWorks Surface
- SolidWorks Weldments
- SolidWorks Assembly
- SolidWorks Drawing
- SolidWorks Sheet Metal
- SolidWorks Mold Design
- SolidWorks Simulation
- SolidWorks Motion
And MORE
►►►SUBSCRIBE ◄◄◄
-------------------------------------------------------------------------------------------
GO PROFIST ...BE SOLIDWORKIST ◄ suggested words!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
----------------------------------------------------------------------------------------
★------ ۞ ART ۞ ENGINEERING ۞ CREATIVITY ۞ ------★
----------------------------------------------------------------------------------------
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
OTHERS:
►MAGMA "Casting":► • 9- MAGMA 5.2 Tutorial:...
►MATLAB:► • 1- MATLAB TUTORIAL for...
►Electronics & Arduino :► / @electronics-tutorial
■Facebook► / solidworks.tutorial.page
■Google+:► plus.google.co...
■Donation :► www.paypal.com...

Опубликовано:

22 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 60

@khalidashzz 4 года назад

in 11:10 he chose the line to the left downward (the one with the gab of 5mm with respect to the line he draws) and the point of contact between the two lines and then chose (make coincident ) check the selected entities box in his selection to ensure that you choose the right one!

@carlosmaffessoni4638 7 лет назад

So ingenious and useful video, a truly revision of basic SW resources. Although it has no sound is perfectly easy to follow, thank you!

@Peace10427 8 лет назад

Hey man, at 6:00 min you made a hard cut and the lower two circles sit no more on the 12.7 mmm offset.... where did you chance a measure that they mve into the offset?

@SamnissArandeen 9 лет назад

This is quite awesome. I should ask, though...where are the rest of the mains? What about oil galleries? The water jacket is nice, but there's no ports for water to be pumped in and out.

@kinhvule6470 7 лет назад

at 11:09 i don't understand how can you do that? i can't do it in my drawing, please help me!!

@dragoro3033 4 года назад

Hopefully you found the solution, but if not and you are still interested -> My solution was going back to the very first part and drawing out the shape of the engine. My numbers were wrong. check those, and make sure they match up. that fixed it for me.

@sairocadiz9571 7 лет назад

how did you make the line in 11:10?? thanks

@joseluisMartin 9 лет назад

really nice job, you've got the dimensions of the model?

@2slamsala7 7 лет назад

how can i get full dimensions of all parts of engine ?

@muhammedince4429 7 лет назад

ı can't select the centerline in the move/copy command.( 10:00 ) How did selected the line ?

@ZZ-ob4pc 7 лет назад

I am truly enjoying working on the engine with you. I just want to know why are the holes in the block not aligned? and why you never used the "hole wizard" for the holes?

@mahirkepic3273 3 года назад

Hey at 14:14 do you filet all the inside corners or just the three you did?

@bravelionfamous2552 7 лет назад

Hello, would you like please to tell me how would I be able to see clearly the demensions of different pieces in those tutorials? should I subcribe or so? I hope to get the answer very soon, because IM in dire need to learb more about solidworks, thanks in advance

@danielhamonangan799 9 лет назад

my thin feature is checked when I want to make the boss-extrude and it can not be unchecked, please help!!!!

@adeelsyed7291 8 лет назад

What command did you use at 3:53 to give all the snap points of the circle?

@simatmakina2963 5 лет назад

thankyou: ) very Much. Bror. God bless you..

@kakanipavan801 4 года назад

Can please please tell which car engine model is these

@stonelisek2787 9 лет назад

any issues building this in solid works 2012. looking to start this tomorrow on my 2012 software.

@kakanipavan801 4 года назад

Can please please tell which car engine model is these

@sumitpatil6346 4 года назад

why didn''t you use mirror command for left and right side block

@christianjimenez1169 6 лет назад

Very niiiiiiiice. How do you do the thing at the end with all the purple lines??

@dariodedomenico5647 6 лет назад

At 6:38 I can’t understand how you make that rib

@Eviscerate86 9 лет назад

Hey. You are my SW mentor. After car engine project is done what would be your next project? I am hoping for a jet engine. Thanks always!!

@Sw-tcNet 9 лет назад

Lust Thanks Lust for your comment. Yes, you are right. a jet engine is planned a little later. after covering a motor cycle and it's engine!

@Lalogalviz 9 лет назад

gracias amigo por estos tutoriales son muy buenos exitos

@DeepakSharma-dm5wv 6 лет назад

sketch ki PDF with dimenision kise download ho ghi

@jerryiceland 9 лет назад

Hello Bro. Thanks for this project. I have a little problem completing the engine block. Did you combine both bodies to make it one solid block. The combine function is not working for me. Pls help. Thanks

@Sw-tcNet 9 лет назад

Jerry Iceland Thanks bro for comment. No I didn't use the combine because it will combine automatically after extruding the shorter body!

@jerryiceland 9 лет назад

SolidWorks Tutorial ☺ ok thanks very much for your reply . I'll try it again

@AhmedSaberSayed 8 лет назад

how did you fix the cut at 5:48 ??

@AhmedSaberSayed 8 лет назад

the origin suddenly is no longer mid point and I don't understand why

@danielbustos7801 8 лет назад

what you have to do is take the first sketch and make the constructive line, the middle point of the top line.

@AhmedSaberSayed 8 лет назад

Thanks man, but I already figured it out but I have a note to tell you. the cam shaft mechanical rotation isn't reasonable. Isn't there a way to make the gear mesh with the cam shaft to make the rotation real?

@emrahatagan 7 лет назад

Hello 10:57 how did line make you blue

@I-TingYen 2 года назад

i think we should make convert entities first, then choose the line when you make the offset entities

@avdheshtiwari1073 2 года назад

How to mirror used 8:12 please

@ManojKumar-lv5qo 4 года назад

Very nice. If you explain evey command in English it becomes more useful.

@AmanKozybayev 8 лет назад

awesome!!!

@amyphillips1801 5 лет назад

What happens at 5:58?

@3goldy 9 лет назад

Where is the feture of "Always Assume Symmetry", so it can save the indevidual use of "mirror" for EVERY SINGLE feture?

@Sw-tcNet 9 лет назад

3goldy is there an icon for it? the second half of block is not symmetric.

@3goldy 9 лет назад

SolidWorks Tutorial ☺ this software should have it.

@TitovIgorBro 4 года назад

Hey everyone: this video is outdated a little and now it's better to copy&rotate using the circular pattern function

@ilyasata1723 9 лет назад

Tiresome but, it is good exercise.

@ratimachaberidze9453 8 лет назад

what is program name this loocks like REVIT

@eslam841 8 лет назад

Solidworks 2014

@hamadahoussien8833 8 лет назад

how i can download this video

@dinozorskull 7 лет назад

FREEMAKE VİDEO DOWNLOADER

@vinny659 8 лет назад

How come i tried to copy the feature, it shows on the preview but once i pressed ok it disappears!

@mohammadasri4395 6 лет назад

my sw crash when trying to cut at 11:16

@grupoamecanica6157 9 лет назад

What I shoul do if I want to make a v8? thanks :)

@TwiiOne 7 лет назад

10:48 !!!!!!!!!

@Norman_Peterson 8 лет назад

audio

@angrypotato97 8 лет назад

if u need audio to understand this, then go find tutorials for beginers

@konstruktionsmarktde9007 9 лет назад

Tol Tol Tol! Bist du Konstrukteur und möchtest du deine Projekte und Idee weiter verkaufen? Melde dich auf www.konstruktionsmarkt.de - Platz für deine Projekte!