Solved Problems on Clipper and Clamper Circuits

Подписаться 623 тыс.

Просмотров 127 тыс.

50% 1

In this video, the examples on the Clipper and Clamper circuit has been solved.
By watching this video, you will learn how to solve the examples on clipper and Clamper circuits.
0:36 Example 1 (Clamper Circuit)
4:02 Example 2 (Clamper Circuit)
5:49 Example 3 (Clamper Circuit)
8:16 Example 4 (Clipper Circuit)
12:22 Example 5 (Clipper Circuit)
The other useful videos related to Clipper and Clamper circuits.
1. Clipper Circuit Explained
• Clipper Circuit Explai...
2. Clamper Circuit Explained
• Clamper Circuit Explained
3. Full Wave Rectifier Explained
• Full wave Rectifier Ex...
4. Half Wave Rectifier Explained
• Half wave Rectifier Ex...
5. Solved Examples on Zener Diode
• Solved Problems on the...
This video will be helpful to all the students of science and engineering in solving the examples on the Clipper and Clamper circuit.
#ClipperCircuit
#ClamperCircuit
#ClipperAndClamperCircuit
Follow me on RU-vid:
/ allaboutelectronics
Follow me on Facebook:
/ allaboutelecronics
Follow me on Instagram:
/ all_about.electronics
Music Credit:
www.bensound.com/

Наука

Опубликовано:

9 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 44

@ALLABOUTELECTRONICS 5 лет назад

The timestamps for the different examples covered in the video: 0:36 Example 1 (Clamper Circuit) 4:02 Example 2 (Clamper Circuit) 5:49 Example 3 (Clamper Circuit) 8:16 Example 4 (Clipper Circuit) 12:22 Example 5 (Clipper Circuit)

@anilkumar-rc8tz 3 года назад

This channel is genuinely superb . I have cleared many doubts ..tq sir

@bhabagrahimohapatra8591 Год назад

OUTSTANDING

@jeanmanuel6577 4 года назад

thank you!!!

@kabandajamir9844 2 года назад

So nice the world's best teacher

@shriyashukla1429 Год назад

4:43 Sir, in example 2, what happens if there is a current source(triangular) instead of voltage source at the input?

@mayurshah9131 5 лет назад

Very well explained

@prempatel2583 9 месяцев назад

Thanks you sir🙏🙏

@GiuseppeFerraro-z7giuseppe7z 5 лет назад

Thanks!!

@groovyylashe3947 4 года назад

Good luck for your exams yall.

@bhanuprakash7296 4 года назад

Good

@SkylineGTR3711 4 года назад

dude u r awesome!

@dhairyashah1746 3 года назад

Saviour before exam🔥😎😎

@poojashah6183 5 лет назад

Very useful

@bhabagrahimohapatra8591 Год назад

GOOD

@mohitkwatra9587 3 года назад

Hey pls include some questions with non ideal diodes also!!

@rohitnachnekar8900 4 года назад

Thank u ..😇😇🤘👍

@Ifrahshahhh 2 года назад

sukran

@ankitmishra2723 5 лет назад

Thanks sir

@deeptisharma8151 2 года назад

How voltage minimum value comes - 20.5 v in q3?

@ALLABOUTELECTRONICS 2 года назад

During the negative half cycle, the input voltage is -14V. And the voltage across the capacitor is 6.5V ( from left to right). So, both voltages come in series. And if you see the voltage across the load, then that is -6.5 - 14 = - 20.5 V. So, that is the minimum output voltage. I hope, it will clear your doubt.

@black-sci 3 года назад

Is it minus 10 Volt

@salvatore8646 Год назад

In last example, where you said in last condition voltage is less than -0.7 then zener diode is -0.7 why is that?

@ALLABOUTELECTRONICS Год назад

When Vin is negative, it means that, the polarity of the voltage is reverse and when Vin is less than -0.7 V it means that, the voltage at the anode of the Zener diode is more than cathode and it is more than 0.7V. Therefore, the Zener diode will be forward biased and the voltage between the anode and cathode of the Zener diode will be 0.7V. But we are measuring that voltage from the top to bottom (Between Cathode and anode). That's why that voltage will be -0.7V. I hope, it will clear your doubt.

@saumyapandey2270 Год назад

@@ALLABOUTELECTRONICSbut jab hum vth nikalwnge to vo 10 v se kum hoga Issliye xener diode ko off condition me rehna chahiye Plz correct me if I am wrong??

@okabae7927 3 года назад

in example 4 why isn't waveform clipped at -7v? why is it curved?

@ALLABOUTELECTRONICS 3 года назад

The case, which we considered (-10V) is the minimum value of the input signal. But actually, Vin is is continuously changing (Sinusoidal signal) That means Vo will also change in a similar fashion when input is less than -4. That's why it is curved. I hope it will clear your doubt.

@sovietrepublic38 5 лет назад

Hi, will you make some videos about op-amp combining with clipping and clamping circuits? I want to diy guitar effect units. Thanks!!

@ALLABOUTELECTRONICS 5 лет назад

Yes, very soon.

@Acesushii. Год назад

what to do when rl has value

@ALLABOUTELECTRONICS Год назад

Hi, would you please mention where you are referring to in the video. It would be easy for me to answer your question.

@user-hg1jb4kx1j 9 месяцев назад

Sir, 1st numerical answer is contradicting with your clamper tuturial. It should be between 10 V to 30 V according to your past explanation. It is creating doubt. Please clear.

@shubhrajit2117 9 месяцев назад

The battery must be reversed

@ALLABOUTELECTRONICS 9 месяцев назад

It will be between +10V and -10V. Please watch it again (The video on Clamper Circuit). You can also check the simulation of the same circuit. It is between +10V and -10V. www.multisim.com/content/i8TjgyMHGsHuKUYuQet46c/example-1-clamper-circuit/open/ If you still have any doubt then let me know here.

@shubhrajit2117 9 месяцев назад

In Example 1 the battery will be reversed...

@ALLABOUTELECTRONICS 9 месяцев назад

No, thats alright. With the same circuit, you will get the output between +10V and -10V. For more info, you may also check the simulation of the circuit. Here is the link: www.multisim.com/content/i8TjgyMHGsHuKUYuQet46c/example-1-clamper-circuit/open/

@shubhrajit2117 8 месяцев назад

The confusion started bcoz u wrote -10V which basically means the battery is reversed