Тёмный

SOUND INSTALL: Delkevic Exhaust on a Royal Enfield Himalayan 

SW Colorado Adventures
Подписаться 1,8 тыс.
Просмотров 9 тыс.
50% 1

THERE IS A SOUND COMPARISON...In this video, we take a look at how Delkevic Exhausts➡️ delkevic.com/stubby-14-carbon... can help increase the growl and efficiency of your Royal Enfield Himalayan. By installing Delkevic exhausts, you'll achieve more efficient engine operation. Is there a difference in power at the asphalt or trail? I will let you know when I get past the snow for a ride!
If you're looking for great sound and a more efficient engine on your Royal Enfield Himalayan, then be sure to check out Delkevic exhausts! With Delkevic exhausts, you'll get the power and growl you're looking for, without sacrificing fuel efficiency. So don't wait any longer, and give Delkevic exhausts a try today!
Riding Gear:
🧤Gloves (Affordable)➡️ amzn.to/3BsbsNl
🏍 Fuel X Pro ➡️ amzn.to/3UjIzKd
👖 Riding pants from TourMaster ➡️ amzn.to/3WiHK6k
🏍 K&N Air filter for the Himmy ➡️ amzn.to/3U34Wnt
🧳 Saddlebags➡️ amzn.to/3XxyITy
🏍 Accessory Deals ➡️ ebay.us/QG51sI
Videos:
🎥 Fuel X Pro Review ➡️ • Don't Buy The Fuel X P...
🎥 Himalayan Review ➡️ • Worth It? REVIEW - 202...
🎥 Accessory Review ➡️ • INSTALL & REVIEW: Roya...
#delkevicus #royalenfield #royalenfieldhimalayan #adventuremotorcycle #mentalbreak #southwestcoloradoadventures #southwestcolorado #colorado #dualsport #himalayanbike
Don't forget! I have only had this bike since October. When Spring is here, we are going to tear up some trails. I look forward to seeing you then!
Disclaimer: I am an Affiliate for many sites; therefore, anything purchased through my links, it pays a small commission. 😉
Intro - 00:00
Background - 0:24
What's in the box? - 1:14
The removal of OEM - 3:30
Clean connections/ assembly - 6:50
Hanger bracket install - 11:48
Sound Comparison - 15:15
Overview of install - 16:45
Initial thoughts - 17:50

Развлечения

Опубликовано:

 

2 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 50   
@swcoloradoadventures
@swcoloradoadventures Год назад
🏆Thanks to skotty1962 for asking about the actual weight difference! GREAT question. Delkevic site has theirs at 3.572 lbs. I just weighed the OEM...11 lbs even!
@DnSAdventures
@DnSAdventures Год назад
Just got myself a used 2022 himalayan for a heck of a deal. First motorcycle but have to wait until March for the MSF course haha. Thanks for sharing your experiences and possible upgrades. Will be living through other RU-vidrs until I get that license. - Shane
@swcoloradoadventures
@swcoloradoadventures Год назад
That's awesome, Shane! There are deals out there and I really think this is a great first bike. Love to hear more when you are up and running. In the meantime, Its tinker time in winter. Thanks for watching!
@freedomriding2558
@freedomriding2558 11 месяцев назад
Thanks for making this. Wanna change the exhaust always thought it didn't really fit with the rest of the bike. Brother you have a good voice for radio or podcast.
@swcoloradoadventures
@swcoloradoadventures 11 месяцев назад
Haha! Thanks for saying so. Sure hope it helps and I really love the change!
@andrewrobinson3030
@andrewrobinson3030 Год назад
Really enjoyed watching this. When I get my Himalayan I will change the exhaust myself
@swcoloradoadventures
@swcoloradoadventures Год назад
Thanks Andrew! The exhaust is on the simple side of installs for sure. You can definitely do it.
@geraldburmeister9637
@geraldburmeister9637 Год назад
I love delkevic exhaust. Got the titanium 13" on my 18 cbr1000rr and the 14" stainless steel oval on my 18 crf250l with spark arrestor. Both sound great and very durable. My son has 18" trivoval on 18 250 ralley.
@swcoloradoadventures
@swcoloradoadventures Год назад
Hey Gerald! Thanks for the comment and endorsement. Not sure I could be any happier with the choice. It has a great growl. Thanks and be safe out there!
@MichaelWhite-cx4ho
@MichaelWhite-cx4ho Год назад
Hello again, Ron! Just watched this install video all the way through for the first time. Lots of great tips and insights, IMO, that I missed the first couple of times I skimmed through. I, too, own a '22 Himi, Pine Green, and love the bike except for the exhaust! "Sewing machine" indeed! I also own a 1200 Sportster with an aftermarket exhaust that plays a sweet note that I suspect is a #1 all-time hit in Valhalla! I also suspect that RE will include a better stock system on the RE 450, if and when it arrives, as most of their other bikes have nicely configured and finished pipes. After much research, I am going with the same 14 inch "Stubby" you purchased, with the spark arrestor as well, only in the stainless finish; although, the carbon fiber looks amazing. You mentioned painting your stock header pipe, and I have mentioned to you that there are numerous choices, including several off the shelf that are rated for 2000 degrees Fahrenheit. Keeping the stock header helps with emissions compliance, which may become more of an issue going forward. It also maintains the two header pipe mini shields that prevent "boot melt;" a problem some have reported with the Delkevic header as it does not have mount points for the shields. Mini aftermarket shields can be had, but customizing fit is sometimes time-consuming. For me, the loss of the cat is the bigger issue. Please be aware that some Himi/Delkevic owners have reported questions by forestry officers regarding the spark arrestor on the Delkevic, so having a bookmark on the spark arrestor option at info/sales at Delkevic might get you on your way faster should you ever be stopped. Thanks again for your great videos! IMO, you are a natural-born instructor!
@swcoloradoadventures
@swcoloradoadventures Год назад
Thanks Michael! Lot of good information there. Glad you are making the move and its a good tip for the forest service. Looking forward to getting up into the bigger trails as the snow melts. Thanks!
@OurDee
@OurDee Год назад
Thanks for the poundage.
@swcoloradoadventures
@swcoloradoadventures Год назад
It was a great recommendation! You are welcome.
@44musher
@44musher Год назад
Ok, im step for step with your mods minus the fuel management, the wifes not happy with you, me and the Himalayan say more goodies Ron !
@brianmapes6202
@brianmapes6202 Год назад
the guard protects the heal off your boot. i have a Delkevic on my wish list.
@swcoloradoadventures
@swcoloradoadventures Год назад
Yeah, I thought I wrote that in. I figured it out when I was editing. That's when I catch my silliness. Thanks!
@punkrockdidi
@punkrockdidi 6 месяцев назад
Did a bike swap last week and I'm owner of a 1984 Honda XL 600 R now 😅 The himmy (2023) was great but I couldn't resist the Honda 🤤
@swcoloradoadventures
@swcoloradoadventures 6 месяцев назад
Nice! Much more dirt oriented if that’s your deal. I feel I’m a bit more dirt oriented than the Himmy sometimes. Be safe out there!
@punkrockdidi
@punkrockdidi 6 месяцев назад
@@swcoloradoadventures exactly and not too bad on highways either ☺️ love your channel/content 👍
@swcoloradoadventures
@swcoloradoadventures 6 месяцев назад
@@punkrockdidi thanks for that!
@mattyb7736
@mattyb7736 Год назад
That tiny little protective cover by the join is rather critical. I burnt my right heel accidentally resting my foot against the pipe. Header wrap makes a big difference to performance as well.
@swcoloradoadventures
@swcoloradoadventures Год назад
That’s a definite possibility. Did you have the cover on? I realized what it was when I edited the video. The brain doesn’t always keep up with what I’m doin unfortunately. Thanks!
@MichaelWhite-cx4ho
@MichaelWhite-cx4ho Год назад
Sir: Thank you very much for this very informative and interesting video. The Delkevic exhaust sounds fantastic! I've heard them now on several Himalayans. The 9-in sounds great as does your 14. In fact, they sound very similar and far far better than stock! I was glad to see that you used the sealant provided. I saw one instance where the installer failed to use it, and there was exhaust leak. I think the bike will look great with the header painted black. I have considered doing it with a ceramic coat process. How are you planning on doing yours? Thank you again for passing on your knowledge re: the Himalayan! Much appreciated!
@swcoloradoadventures
@swcoloradoadventures Год назад
Hello Michael! You are absolutely welcome. More than anything I am glad it helped. I agree with you. WAY better than stock. I hope to take it out tomorrow or Sunday assuming its not still below freezing. I will post that as soon as I can for the road test. My thought is probably stove paint to handle the heat. I live very remotely and do not know of a company that can do the ceramic coating close by. If I did, that would be my first choice for durability. Thanks for the comments!
@MichaelWhite-cx4ho
@MichaelWhite-cx4ho Год назад
@@swcoloradoadventures I have used the flat black DIY high heat paint from Rustoleum on a steel fire pit screen with good results. Just checked online now, and there appear to be some newer finishes and colors versus the old flat black that was reviewed as not being nearly as heat or liquid resistant. Did you have a brand in mind? Certainly couldn't hurt to try a finish! If it doesn't work out, reprep and try something else. I wish RE had finished the exhaust in black like they do on many of their other bikes. That might add a bit to the cost, but the header pipe and exhaust are the Achilles' Heel of the appearance of this otherwise striking bike, in my opinion. I have seen the Delkevic stainless header pipe, and it's a beauty! I think yours will look even better in black and more in character with the bike as well! Please, if you are able, let us know how it turns out. Thanks again!
@swcoloradoadventures
@swcoloradoadventures Год назад
Michael, I cannot remember which brand I bought exactly. The thing about RU-vid is that the whole process will likely end up as a video. I will definitely make sure everyone has the opportunity to see it. Thanks for the support and input!
@OurDee
@OurDee 9 месяцев назад
Too much preasure on just the header? The Delkevic header has a support bracket at the rear of it. I was impressed with the whole system offered.
@swcoloradoadventures
@swcoloradoadventures 9 месяцев назад
Sure don’t think so. Weighing almost 1/3 of OEM and with the bracket, I am confident that’s not a concern. If there was a secret, it would be to make sure everything is lined up naturally from the header to the bracket so there’s no awkward twisting of the system. Thanks!
@darrinanderson953
@darrinanderson953 Год назад
Is your Himalayan a 2022 model just checking because the website only goes to 2021 Thanks for a great video.
@swcoloradoadventures
@swcoloradoadventures Год назад
Thanks! Yes it is. In fact, I reached out directly to ensure the fitment extended to 2022 models. So, you’re good!
@elcanaldetifico6115
@elcanaldetifico6115 10 месяцев назад
hello bro, good video, could you tell whats the diameters of the himalayan pipe, and the adaptor?
@swcoloradoadventures
@swcoloradoadventures 10 месяцев назад
Hey there! The gasket measurement is 42 mm outer diameter X 36 mm inner (1 mm more than pipe) X 30 mm long. Hope that helps. Sure it depends on the diameter of the exhaust.
@jacobhence8452
@jacobhence8452 Год назад
Is there any reason this wouldn't fit on a 2023? It's just that the website hasn't been updated for that info, and it looks like the exhaust pipe could be very marginally different? Thanks, cheers from Salida!
@swcoloradoadventures
@swcoloradoadventures Год назад
Hey Jacob in Salida! My favorite area in Colorado is up there. More precisely BV and around. Hope the snow melts at some point up there. Anyway. Yes. Even the 2022 wasn’t listed at some point when I got mine. I think that you may have a different o2 sensory position, but for the exhaust, I think that’s it. I emailed support to verify and the guy from Littleton emailed me back pretty quickly. A day. Good luck and thanks for watching!
@adamclarke1105
@adamclarke1105 Год назад
Make sure the axle nut will miss the exhaust as it cycles up and down. My stock exhaust had dents in it.
@swcoloradoadventures
@swcoloradoadventures Год назад
Hey Adam! That’s definitely a good point. I’ve got over a 1/4” and was not able to compress the back enough to get it close enough to hit, but I’m not coming off a drop either. There was enough play in the exhaust when mounting to get it out of the with way if it was ever too close. And depending on how it was torqued down, it could have been closer for sure. If ever dropped on that side that would be a key point to check to ensure the position is correct. Great observation. Thanks for that!
@magnet2345
@magnet2345 Год назад
What size Delkevic exhaust did you put on.
@swcoloradoadventures
@swcoloradoadventures Год назад
Hah! Answered the last question first. You got it. Thanks!
@magnet2345
@magnet2345 Год назад
OOOps, just realized you used the 14"
@swcoloradoadventures
@swcoloradoadventures Год назад
I did! I wanted it a bit shorter to clear the saddlebags. Do you have one?
@richardturner4950
@richardturner4950 Год назад
Only Americans could get so excited about a bloody silencer!
@swcoloradoadventures
@swcoloradoadventures Год назад
Hey Richard! Thanks for watching. It’s just fun tinkering and making the bike my own. Though it does sound nice as well.
@MichaelWhite-cx4ho
@MichaelWhite-cx4ho Год назад
Seems to me that people everywhere get excited about "silencers." Perhaps we Americans just look and sound better doing it!
@swcoloradoadventures
@swcoloradoadventures Год назад
🤔Delkevic Exhausts aren’t just for Himalayans‼️Is you’re exhaust stock on your ADV motorcycle⁉️what kind❓
@EAGLE-SAN
@EAGLE-SAN Год назад
NICE VIDEO!! I MENTIONED BEFORE THAT I REPLACED MY ANCHOR WITH A KEMIMOTO SLIP ON . AMAZON- 38 SMAKKERS- FREE SHIP. IT IS INSTALLED... I DID NOT ADD THAT RUBBER MOLDING FOR THE EXHAUST - JERRY-RIGGED IT SO IT IS SNUG. I WAS CONCERNED THAT IT MIGHT MELT!!! ALSO, IF YA LIKE, TAKE OFF THAT EXHAUST SHIELD AND PAINT IT FLAT BLACK- LOOKS GOOD!! JOHN IN NORWOOD, CO.
@swcoloradoadventures
@swcoloradoadventures Год назад
Hey John! Thanks for that. Totally my plan when I paint the header. It’ll all be black. With high temp paint of course. Nice job on the install! Maybe we’ll bump into each other this summer when I head up 145. Thanks!
Далее
Ne jamais regarder une fille à la plage 😂
00:10
Просмотров 1,3 млн
кажется, началось
00:45
Просмотров 947 тыс.
Royal Enfield Himalayan Custom Exhaust
9:09
Просмотров 6 тыс.
Royal Enfield Himalayan 20,000 mile review
35:44
Просмотров 10 тыс.
Exhaust & Air Filter Mod Royal Enfield Himalayan
32:03
Delkevic Sport Exhaust Muffler Kit Fitting Guide
13:08
Himalayan 16 Tooth Sprocket Conversion
17:09
Просмотров 20 тыс.