Spark Plug Gap | Get BEST Mileage on your Car or Motorcycle 

A B20vtec video is out! that will be equipped with gapped plugs too! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-m79v_e7p_NY.html

Ma shaa Allah... detailed info. Thanks for sharing po. Have a nice day

Good tips! The way you drive makes a huge difference too. My 5 speed D17A2 powered 05 Civic sedan gets me around 46-47 MPG average and my best tanks were around 50 MPG. That's with a Crower stage 1 camshaft, D16Y8 intake manifold, K24A4 fuel injectors, K20Z1 throttle body, custom cold air intake, cat delete, 2.25 inch eBay exhaust, Flowmaster muffler, and a few other little mods like electric power steering, lightweight alloy wheels, and coilovers. Great setup for a daily driver IMO. It's quick enough to be fun and I can still get better MPG than most people do driving hybrids.

So much info in this video bro. The idea of saving fuel in this times is really spot on. I see you use the NGK spark plugs. This is nice. :) Keep going my friend. You got my like here.

i use the same BKR6E-11 on my L12B3 Honda Brio. glad i found this video, im about to do a plug replacement soon. thanks for the pro tips!

Good video! It'll help inform alot of people! 💯👌

Much love brother 🛠🛠🚗😎🙏❤

next up... we will be exploring other brands of plugs and asses any changes if there is any, good or bad we will document it ftw

Solid talaga!

A big help chief especially masakit sa bulsa ang gas ngayon like literal na masakit 😭. Anyways, present chief 🙋‍♂️

I had a d15b7 with a p08 head. 18 degree timing and d15b7 stock trans. I was running rec 90 octane with no ethanol and i was able to get 50 mpg. Oh i with beck arnley wires ngk 7 coppers gapped at .050. I loved that little engine. This was 15 years ago.

Love your info my k20 is in a crv what gap would you recommend for me??many thanks awesome work

Good tips para sa mga kalalakihan jan. super busy lang late ang support ko, 👍😊

Here's a little out of the box idea. It's nothing new or groundbreaking as it's been done many times, however it's still not as common. Grounding upgrades. I've seen my oem ground wire from my valve cover to the chassis and it's pretty flimsy, not to mention it's probably been there since factory so my plan is to replace every grounding wire (it should be around 4 wires) and maybe run 1 2 extra with 4-8 gauge wire (factory is 14 gauge if i am not mistaken) in hopes to make my electrical system more efficient. People note that your starter works better, your lights don't dim as much in idle and just in general the car works smoother. Better reading from sensors, smoother idle, better TPS readouts. It's more about longevity and efficiency than making power. However, with all being said to me it's a must have upgrade especially if you want to run aftermarket ecu or just want to re-map the car as you will get a better and more precise readout on your sensors. It's as they say, never trust things you read on the internet, always doubt especially when there are conflicting pov's in the forums. But it should be easy to do as it's a fairly simple DIY and sourcing cables and connectors is rather cheap actually. It's an interesting topic and look forward to giving it a shot, whether I notice something or not, just maintenance wise replacing old crappy wires and hopefully improving electrical longevity is fine by me.

This is very important info. Free power. Here the gás custs 2€ per liter. Many Times people only looks at the distributer when it stops working.

Can you use the integra Type R cap and rotor on a Standard 99-2001 CRV standard Distributor? is the Typer R and better than the standard CRV B20 cap and rotor?

Thanks for sharing us the knowledge. My question is what's a good gap for a Yamaha NMAX 155cc and on a Honda Civic ph15a motor. Thanks in advance

Is .0045 the max you would run for a honda coil longevity?

Boss Slash do you recommend the GP or Iridiums to do this gapping? Thanks!

I was using bkr7e-11 on my sohc zc engine and had it tuned. I am planning to have it retuned and install a full stainless exhaust system, I have research on google and what I have read says that the bkr7e-11 are way too cold and best suited for turbo set up, do you recommend to change my sparkplug or keep it?

Thanks so much bro, I use the ngk bcp7es plugs on my b18v, what gapping should I use?

Nice,was wondering if the dizzy delete plug on coil on d16 would add another 3 to 4 bhp etc?🤔

I got a echo. Guzzling fuel. Got a short some place....

Any thoughts on what Rocket does with his plugs?

Sir what Spark plug can you recommend for Honda civic 2002, d17a engine , thank you in advance , God bless ,

Sir, regarding sa honda high tension wires, how long does it last? may test ba using multimeter para madetermine kung okay pa ang current flow nya? i have been using my HONDA HTW since like ages and so far di pa naman nagloko😅. thanks po pala sa info sa plug gapping, me and the boys will definitely check our plug gaps now that we have the correct gap value.

Hi good write up would this work well on my k20 ?

Gapping really makes a big difference. I just dont understand why some do not practice this. Haha

What about GSR b18c1

I've got an Nmax. Do you know what the gap is for it?

Mas ok po ba bkr6 kesa bkr7? B16b 1840cc stroker

ilang HP yang sinasabing mong 13k per liter?

Spark plug gap, distributor cap and rotors = Neglected by some!

nka plasma ignition nq hahaha